Can't get MAC addr of an ed(4) adapter
Jeremie Le Hen
jeremie at le-hen.org
Mon Jun 6 13:20:23 GMT 2005
Hi list,
a friend of mine just upgraded his box from 5.4 to CURRENT. His
ed(4) network adapter used to work when running 5.4 as well as
Windows. Now, the card is recognized (as ed1, not ed0, I still
wonder why since I can't see any resource conflict related message)
but it doesn't have a MAC address. Note that the interface flags
are somewhat weird. My friend tried to use an in-kernel driver as
well as the if_ed module, this is the same. Defining ED_DEBUG
doesn't give more diagnostic about the problem. We can still
assign a MAC address manually, although ATM I still haven't got any
chance to try if the card is really working, but I'll be able to
in a few hours.
I attached the dmesg of boot verbose. Thanks in advance for your help.
Regards,
%%%
bana# ifconfig ed0
ed0: flags=108802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
ether 00:00:00:00:00:00
bana# ifconfig ed0 link 00:11:22:33:44:55
bana# ifconfig ed0
ed0: flags=108802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
ether 00:11:22:33:44:55
bana# pciconf -lv | sed -n '/^ed/,/subclass/p'
ed0 at pci0:7:0: class=0x020000 card=0x802910ec chip=0x802910ec rev=0x00 hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RTL8029 NE2000 compatible Ethernet'
class = network
subclass = ethernet
%%%
--
Jeremie Le Hen
< jeremie at le-hen dot org >< ttz at chchile dot org >
-------------- next part --------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #14: Mon Jun 6 14:50:19 CEST 2005
root at bana.massena.epinetworx.com:/usr/src/sys/i386/compile/FRANKY
Preloaded elf kernel "/boot/kernel/kernel" at 0xc08ac000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08ac188.
link_elf: symbol AcpiDmDumpMethodInfo undefined
KLD file acpi.ko - could not finalize loading
Calibrating clock(s) ... i8254 clock: 1193152 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1792726288 Hz
CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz (1792.73-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 536805376 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000001f6bffff, 514437120 bytes (125595 pages)
avail memory = 516026368 (492 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fb000
bios32: Entry = 0xfb480 (c00fb480) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb4d0
pnpbios: Found PnP BIOS data at 0xc00fbe90
pnpbios: Entry = f0000:bec0 Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
wlan: <802.11 MAC ACL support>
wlan: mac acl policy registered
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
mem: <memory>
Pentium Pro MTRR support enabled
io: <I/O>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000070
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=06501039)
pcibios: BIOS version 2.10
Found $PIR table, 6 entries at 0xc00fd5b0
PCI-Only Interrupts: 9 11
Location Bus Device Pin Link IRQs
slot 1 0 6 A 0x42 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 6 B 0x43 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 6 C 0x44 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 6 D 0x41 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 7 A 0x43 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 7 B 0x44 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 7 C 0x41 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 7 D 0x42 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 8 A 0x44 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 8 B 0x41 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 8 C 0x42 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 8 D 0x43 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 15 A 0x43 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 15 B 0x44 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 15 C 0x41 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 15 D 0x42 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 9 A 0x41 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 9 B 0x42 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 9 C 0x43 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 9 D 0x44 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 A 0x41 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 B 0x42 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 C 0x43 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 D 0x44 3 4 5 6 7 9 10 11 12 14 15
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 6 Entries> on motherboard
$PIR: Links after initial probe:
Link IRQ Rtd Ref IRQs
0x42 255 N 6 3 4 5 6 7 9 10 11 12 14 15
0x43 255 N 6 3 4 5 6 7 9 10 11 12 14 15
0x44 255 N 6 3 4 5 6 7 9 10 11 12 14 15
0x41 255 N 6 3 4 5 6 7 9 10 11 12 14 15
$PIR: Found matching pin for 0.7.INTA at func 0: 11
$PIR: Found matching pin for 0.8.INTA at func 0: 11
$PIR: Found matching pin for 0.15.INTA at func 0: 11
$PIR: Links after initial IRQ discovery:
Link IRQ Rtd Ref IRQs
0x42 255 N 6 3 4 5 6 7 9 10 11 12 14 15
0x43 11 Y 6 3 4 5 6 7 9 10 11 12 14 15
0x44 11 Y 6 3 4 5 6 7 9 10 11 12 14 15
0x41 255 N 6 3 4 5 6 7 9 10 11 12 14 15
$PIR: IRQs used by BIOS: 11
$PIR: Interrupt Weights:
[ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
[ 0 0 0 0 0 0 0 0 0 0 0 12 0 0 0 0 ]
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1039, dev=0x0650, revid=0x01
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base e0000000, size 26, enabled
found-> vendor=0x1039, dev=0x0001, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x0e (3500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1039, dev=0x0008, revid=0x00
bus=0, slot=2, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1039, dev=0x7001, revid=0x07
bus=0, slot=2, func=2
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=d, irq=11
map[10]: type 1, range 32, base ca000000, size 12, enabled
$PIR: No matching entry for 0.2.INTD
found-> vendor=0x1039, dev=0x7001, revid=0x07
bus=0, slot=2, func=3
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=a, irq=11
map[10]: type 1, range 32, base ca001000, size 12, enabled
$PIR: No matching entry for 0.2.INTA
found-> vendor=0x1039, dev=0x5513, revid=0xd0
bus=0, slot=2, func=5
class=01-01-80, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00004000, size 4, enabled
found-> vendor=0x10ec, dev=0x8029, revid=0x00
bus=0, slot=7, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type 4, range 32, base 0000e000, size 5, enabled
$PIR: 0:7 INTA routed to irq 11
found-> vendor=0x1274, dev=0x1371, revid=0x06
bus=0, slot=8, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0105, statreg=0x0410, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns)
intpin=a, irq=11
powerspec 1 supports D0 D2 D3 current D0
map[10]: type 4, range 32, base 0000e400, size 6, enabled
$PIR: 0:8 INTA routed to irq 11
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=0, slot=15, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000e800, size 8, enabled
map[14]: type 1, range 32, base ca002000, size 8, enabled
$PIR: 0:15 INTA routed to irq 11
agp0: <SiS 650 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe0000000
agp0: allocating GATT for aperture of size 64M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xc8000000-0xc9ffffff
pcib1: prefetched decode 0xc4000000-0xc7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x10de, dev=0x0281, revid=0xa1
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=9
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base c8000000, size 24, enabled
pcib1: (null) requested memory range 0xc8000000-0xc8ffffff: good
map[14]: type 3, range 32, base c4000000, size 26, enabled
pcib1: (null) requested memory range 0xc4000000-0xc7ffffff: good
$PIR: Found IRQ 9 for link 0x41 from 9 11
$PIR: ROUTE_INTERRUPT failed.
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xca000000-0xca000fff irq 11 at device 2.2 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xca000000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xca001000-0xca001fff irq 11 at device 2.3 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xca001000
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
atapci0: <SiS 961 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x4000-0x400f at device 2.5 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x4000
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90
ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90
ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=7f ostat1=50
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=ff stat1=00 devices=0x8<ATAPI_SLAVE>
ata1: [MPSAFE]
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xe000-0xe01f irq 11 at device 7.0 on pci0
ed0: Reserved 0x20 bytes for rid 0x10 type 4 at 0xe000
ed0: [GIANT-LOCKED]
ed0: bpf attached
ed0: if_start running deferred for Giant
ed0: type NE2000 (16 bit)
pcm0: <AudioPCI ES1373-B> port 0xe400-0xe43f irq 11 at device 8.0 on pci0
pcm0: Reserved 0x40 bytes for rid 0x10 type 4 at 0xe400
pcm0: <Cirrus Logic CS4297 AC97 Codec (id = 0x43525903)>
pcm0: Codec features headphone, 18 bit DAC, 18 bit ADC, 6 bit master volume, no 3D Stereo Enhancement
pcm0: [GIANT-LOCKED]
pcm0: sndbuf_setmap 1b6000, 1000; 0xc1a42000 -> 1b6000
pcm0: sndbuf_setmap 1b8000, 1000; 0xc1a44000 -> 1b8000
rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe800
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem 0xca002000-0xca0020ff irq 11 at device 15.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:10:dc:cb:ec:46
rl0: [MPSAFE]
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
ed: ed0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
pnpbios: 19 devices, largest 98 bytes
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x81-0x83, size=0x3, align=0
PNP0200: adding io range 0x87-0x87, size=0x1, align=0
PNP0200: adding io range 0x89-0x8b, size=0x3, align=0
PNP0200: adding io range 0x8f-0x91, size=0x3, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
pnpbios: handle 2 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
pnpbios: handle 3 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
pnpbios: handle 4 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
pnpbios: handle 5 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
pnpbios: handle 6 device ID PNP0c04 (040cd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0x20000000-0x203fffff, size=0x400000
PNP0c01: adding fixed memory32 range 0xffee0000-0xffefffff, size=0x20000
PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000
PNP0c01: adding fixed memory32 range 0x100000-0x1fffffff, size=0x1ff00000
pnpbios: handle 7 device ID PNP0c01 (010cd041)
PNP0c02: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf8000-0xfffff, size=0x8000
PNP0c02: adding fixed memory32 range 0xcec00-0xcffff, size=0x1400
pnpbios: handle 8 device ID PNP0c02 (020cd041)
PNP0a03: adding io range 0x294-0x297, size=0x4, align=0
PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
PNP0a03: adding io range 0x480-0x48f, size=0x10, align=0
pnpbios: handle 9 device ID PNP0a03 (030ad041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 10 device ID PNP0f13 (130fd041)
PNP0c02: adding io range 0x1000-0x107f, size=0x80, align=0
PNP0c02: adding io range 0x1080-0x109f, size=0x20, align=0
pnpbios: handle 11 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0x3f0-0x3f1, size=0x2, align=0
pnpbios: handle 12 device ID PNP0c02 (020cd041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
pnpbios: handle 13 device ID PNP0501 (0105d041)
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0
PNP0700: adding irq mask 0x40
pnpbios: handle 14 device ID PNP0700 (0007d041)
PNP0401: adding dma mask 0x8
PNP0401: adding irq mask 0x80
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0
PNP0401: adding io range 0x778-0x77f, size=0x8, align=0
pnpbios: handle 16 device ID PNP0401 (0104d041)
PNP0501: adding irq mask 0x8
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0
pnpbios: handle 17 device ID PNP0501 (0105d041)
PNPb006: adding irq mask 0x400
PNPb006: adding io range 0x330-0x331, size=0x2, align=0
pnpbios: handle 18 device ID PNPb006 (06b0d041)
PNPb02f: adding io range 0x201-0x207, size=0x7, align=0
PNPb02f: adding io range 0x200-0x200, size=0x1, align=0
pnpbios: handle 19 device ID PNPb02f (2fb0d041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
fdc0: ic_type 90 part_id 80
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
adv0: not probed (disabled)
bt0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model MouseMan+, device ID 0-51, 3 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:08, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vt0: not probed (disabled)
sio0 failed to probe at port 0x3f8 irq 4 on isa0
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
cs0: not probed (disabled)
sn0: not probed (disabled)
ie0: not probed (disabled)
fe0: not probed (disabled)
lnc0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c01> at iomem 0-0x9ffff,0x20000000-0x203fffff,0xffee0000-0xffefffff on isa0
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0f13> at irq 12 on isa0
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x3f0-0x3f1 on isa0
unknown: <PNP0501> failed to probe at port 0x3f8-0x3ff irq 4 on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0
unknown: <PNP0401> failed to probe at port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on isa0
unknown: <PNP0501> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
unknown: <PNPb006> failed to probe at port 0x330-0x331 irq 10 on isa0
unknown: <PNPb02f> failed to probe at port 0x201-0x207,0x200 on isa0
ugen0: Creative Labs WebCam Live!, rev 1.10/1.00, addr 2
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1792726288 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
pflog0: bpf attached
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=80 wire
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting PIO4 on SiS 5513 chip
ad0: setting UDMA100 on SiS 5513 chip
ad0: 114473MB <Seagate ST3120023A 3.31> at ata0-master UDMA100
ad0: 234441648 sectors [232581C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ad1: setting PIO4 on SiS 5513 chip
ad1: setting UDMA100 on SiS 5513 chip
ad1: 29325MB <Maxtor 6E030L0 NAR61590> at ata0-slave UDMA100
ad1: 60058656 sectors [59582C/16H/63S] 16 sectors/interrupt 1 depth queue
ata1-slave: pio=PIO4 wdma=WDMA2 udma=BIOSDMA cable=40 wire
acd0: setting PIO4 on SiS 5513 chip
acd0: FAILURE - DEVICE_RESET status=7f<READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> error=80<ICRC>
acd0: <HITACHI DVD-ROM GD-5000/0213> DVDROM drive at ata1 as slave
acd0: read 2412KB/s (6890KB/s), 512KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM 120mm data disc
GEOM: new disk ad1
Trying to mount root from ufs:/dev/ad0s3a
start_init: trying /sbin/init
splash: image decoder found: logo_saver
More information about the freebsd-current
mailing list