SMBus hardware note recognized
Jiawei Ye
leafy7382 at gmail.com
Thu Jun 2 04:20:47 GMT 2005
On 6/2/05, Jia-Shiun Li <jiashiun at gmail.com> wrote:
>
> Your ICH4 SMBus controller should have been supported by ichsmb. Strange.
>
> Try boot verbose and examine the boot messages carefully.
>
Ok, I have attached my dmesg.boot. Doesn't look like the smbus.ko is
probing my SMBus hardware at all.
Jiawei
--
"Without the userland, the kernel is useless."
--inspired by The Tao of Programming
-------------- next part --------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #15: Thu Jun 2 11:50:58 CST 2005
leafy at chihiro.leafy.idv.tw:/usr/obj/usr/src/sys/CHIHIRO
Preloaded elf kernel "/boot/kernel/kernel" at 0xc086f000.
Preloaded elf module "/boot/kernel/miibus.ko" at 0xc086f1b0.
Preloaded elf module "/boot/kernel/if_fxp.ko" at 0xc086f25c.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc086f308.
Preloaded elf module "/boot/kernel/sound.ko" at 0xc086f3b4.
Preloaded elf module "/boot/kernel/usb.ko" at 0xc086f460.
Preloaded elf module "/boot/kernel/random.ko" at 0xc086f508.
Preloaded elf module "/boot/kernel/cpufreq.ko" at 0xc086f5b4.
Preloaded elf module "/boot/kernel/io.ko" at 0xc086f660.
Preloaded elf module "/boot/kernel/mem.ko" at 0xc086f708.
Preloaded elf module "/boot/kernel/firewire.ko" at 0xc086f7b0.
Preloaded elf module "/boot/kernel/fdc.ko" at 0xc086f860.
Preloaded elf module "/boot/kernel/smb.ko" at 0xc086f908.
Preloaded elf module "/boot/kernel/smbus.ko" at 0xc086f9b0.
Preloaded elf module "/boot/kernel/ppbus.ko" at 0xc086fa5c.
Preloaded elf module "/boot/kernel/cam.ko" at 0xc086fb08.
Preloaded elf module "/boot/kernel/ahc.ko" at 0xc086fbb0.
Preloaded elf module "/boot/kernel/ahc_pci.ko" at 0xc086fc58.
Preloaded elf module "/boot/kernel/atapci.ko" at 0xc086fd04.
Preloaded elf module "/boot/kernel/ata.ko" at 0xc086fdb0.
Preloaded elf module "/boot/kernel/sysvmsg.ko" at 0xc086fe58.
Preloaded elf module "/boot/kernel/sysvsem.ko" at 0xc086ff04.
Preloaded elf module "/boot/kernel/sysvshm.ko" at 0xc086ffb0.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc087005c.
Calibrating clock(s) ... i8254 clock: 1193212 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1816988436 Hz
CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz (1816.99-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf13 Stepping = 3
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 528416768 (503 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000001eee3fff, 506195968 bytes (123583 pages)
avail memory = 507793408 (484 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fdb50
bios32: Entry = 0xfdb60 (c00fdb60) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xdb81
pnpbios: Found PnP BIOS data at 0xc00f7700
pnpbios: Entry = f0000:683b Rev = 1.0
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIINT INTEL845> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000090
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25608086)
pcibios: BIOS version 2.10
Found $PIR table, 12 entries at 0xc00f7d20
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 1 A 0x60 3 4 5 7 10 11 12 14 15
embedded 0 1 B 0x61 3 4 5 7 10 11 12 14 15
embedded 0 2 A 0x60 3 4 5 7 10 11 12 14 15
embedded 0 29 A 0x60 3 4 5 7 10 11 12 14 15
embedded 0 29 B 0x63 3 4 5 7 10 11 12 14 15
embedded 0 29 C 0x62 3 4 5 7 10 11 12 14 15
embedded 0 29 D 0x6b 3 4 5 7 10 11 12 14 15
embedded 0 31 A 0x62 3 4 5 7 10 11 12 14 15
embedded 0 31 B 0x61 3 4 5 7 10 11 12 14 15
slot 1 3 0 A 0x60 3 4 5 6 7 10 11 12 14 15
slot 1 3 0 B 0x61 3 4 5 6 7 10 11 12 14 15
slot 1 3 0 C 0x62 3 4 5 6 7 10 11 12 14 15
slot 1 3 0 D 0x63 3 4 5 6 7 10 11 12 14 15
slot 2 3 1 A 0x61 3 4 5 6 7 10 11 12 14 15
slot 2 3 1 B 0x62 3 4 5 6 7 10 11 12 14 15
slot 2 3 1 C 0x63 3 4 5 6 7 10 11 12 14 15
slot 2 3 1 D 0x60 3 4 5 6 7 10 11 12 14 15
slot 3 3 2 A 0x62 3 4 5 6 7 10 11 12 14 15
slot 3 3 2 B 0x63 3 4 5 6 7 10 11 12 14 15
slot 3 3 2 C 0x60 3 4 5 6 7 10 11 12 14 15
slot 3 3 2 D 0x61 3 4 5 6 7 10 11 12 14 15
slot 4 3 3 A 0x63 3 4 5 6 7 10 11 12 14 15
slot 4 3 3 B 0x60 3 4 5 6 7 10 11 12 14 15
slot 4 3 3 C 0x61 3 4 5 6 7 10 11 12 14 15
slot 4 3 3 D 0x62 3 4 5 6 7 10 11 12 14 15
slot 5 3 5 A 0x61 3 4 5 6 7 10 11 12 14 15
slot 5 3 5 B 0x62 3 4 5 6 7 10 11 12 14 15
slot 5 3 5 C 0x63 3 4 5 6 7 10 11 12 14 15
slot 5 3 5 D 0x60 3 4 5 6 7 10 11 12 14 15
slot 6 3 4 A 0x60 3 4 5 6 7 10 11 12 14 15
slot 6 3 4 B 0x61 3 4 5 6 7 10 11 12 14 15
slot 6 3 4 C 0x62 3 4 5 6 7 10 11 12 14 15
slot 6 3 4 D 0x63 3 4 5 6 7 10 11 12 14 15
embedded 3 8 A 0x68 3 4 5 6 7 10 11 12 14 15
embedded 3 13 A 0x69 3 4 5 6 7 10 11 12 14 15
embedded 3 13 B 0x6a 3 4 5 6 7 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
atpic: Programming IRQ9 as level/low
AcpiOsDerivePciId: bus 0 dev 0 func 0
pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12 14 15
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12 14 15
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: <ACPI PCI Link LNKC> irq 10 on acpi0
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: <ACPI PCI Link LNKD> irq 10 on acpi0
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: <ACPI PCI Link LNKE> irq 10 on acpi0
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: <ACPI PCI Link LNKH> irq 10 on acpi0
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x2560, revid=0x01
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base e0000000, size 26, enabled
found-> vendor=0x8086, dev=0x2562, revid=0x01
bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
map[10]: type 3, range 32, base d0000000, size 27, enabled
map[14]: type 1, range 32, base dff80000, size 19, enabled
pcib0: matched entry for 0.2.INTA (src \\_SB_.LNKA:0)
pcib0: slot 2 INTA routed to irq 11 via \\_SB_.LNKA
found-> vendor=0x8086, dev=0x24c2, revid=0x01
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type 4, range 32, base 0000e400, size 5, enabled
pcib0: matched entry for 0.29.INTA (src \\_SB_.LNKA:0)
pcib0: slot 29 INTA routed to irq 11 via \\_SB_.LNKA
found-> vendor=0x8086, dev=0x24c4, revid=0x01
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type 4, range 32, base 0000e800, size 5, enabled
pcib0: matched entry for 0.29.INTB (src \\_SB_.LNKD:0)
pcib0: slot 29 INTB routed to irq 10 via \\_SB_.LNKD
found-> vendor=0x8086, dev=0x24c7, revid=0x01
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
map[20]: type 4, range 32, base 0000ec00, size 5, enabled
pcib0: matched entry for 0.29.INTC (src \\_SB_.LNKC:0)
pcib0: slot 29 INTC routed to irq 10 via \\_SB_.LNKC
found-> vendor=0x8086, dev=0x24cd, revid=0x01
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base dff7bc00, size 10, enabled
pcib0: matched entry for 0.29.INTD (src \\_SB_.LNKH:0)
pcib0: slot 29 INTD routed to irq 10 via \\_SB_.LNKH
found-> vendor=0x8086, dev=0x244e, revid=0x81
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24c0, revid=0x01
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24cb, revid=0x01
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 0000fc00, size 4, enabled
map[24]: type 1, range 32, base 00000000, size 10, enabled
found-> vendor=0x8086, dev=0x24c3, revid=0x01
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
map[20]: type 4, range 32, base 00000c00, size 5, enabled
found-> vendor=0x8086, dev=0x24c5, revid=0x01
bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000e000, size 8, enabled
map[14]: type 4, range 32, base 0000dc00, size 6, enabled
map[18]: type 1, range 32, base dff7ba00, size 9, enabled
map[1c]: type 1, range 32, base dff7b900, size 8, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB:0)
pcib0: slot 31 INTB routed to irq 10 via \\_SB_.LNKB
agp0: <Intel 82845G (845G GMCH) SVGA controller> mem 0xd0000000-0xd7ffffff,0xdff80000-0xdfffffff irq 11 at device 2.0 on pci0
agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xd0000000
agp0: Reserved 0x80000 bytes for rid 0x14 type 3 at 0xdff80000
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xe400-0xe41f irq 11 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe400
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xe800-0xe81f irq 10 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe800
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xec00-0xec1f irq 10 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xec00
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdff7bc00-0xdff7bfff irq 10 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xdff7bc00
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib1: secondary bus 3
pcib1: subordinate bus 3
pcib1: I/O decode 0xc000-0xcfff
pcib1: memory decode 0xdf900000-0xdfdfffff
pcib1: prefetched decode 0xcf500000-0xcf5fffff
pcib1: Subtractively decoded bridge.
ACPI: Found matching pin for 0.2.INTA at func 0: 11
pci_link2: BIOS IRQ 11 does not match initial IRQ 10
pci3: <ACPI PCI bus> on pcib1
pci3: physical bus=3
found-> vendor=0x104c, dev=0x8020, revid=0x00
bus=3, slot=1, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0116, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=10
powerspec 1 supports D0 D2 D3 current D0
map[10]: type 1, range 32, base dfdfd800, size 11, enabled
pcib1: (null) requested memory range 0xdfdfd800-0xdfdfdfff: good
map[14]: type 1, range 32, base dfdf8000, size 14, enabled
pcib1: (null) requested memory range 0xdfdf8000-0xdfdfbfff: good
pcib1: matched entry for 3.1.INTA (src \\_SB_.LNKB:0)
pcib1: slot 1 INTA routed to irq 10 via \\_SB_.LNKB
found-> vendor=0x9005, dev=0x0010, revid=0x00
bus=3, slot=2, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x27 (9750 ns), maxlat=0x19 (6250 ns)
intpin=a, irq=10
powerspec 1 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000cc00, size 8, enabled
pcib1: (null) requested I/O range 0xcc00-0xccff: in range
map[14]: type 1, range 64, base dfdff000, size 12, enabled
pcib1: (null) requested memory range 0xdfdff000-0xdfdfffff: good
pcib1: matched entry for 3.2.INTA (src \\_SB_.LNKC:0)
pcib1: slot 2 INTA routed to irq 10 via \\_SB_.LNKC
found-> vendor=0x8086, dev=0x1229, revid=0x05
bus=3, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base cf5ff000, size 12, enabled
pcib1: (null) requested memory range 0xcf5ff000-0xcf5fffff: good
map[14]: type 4, range 32, base 0000c800, size 5, enabled
pcib1: (null) requested I/O range 0xc800-0xc81f: in range
map[18]: type 1, range 32, base dfb00000, size 20, enabled
pcib1: (null) requested memory range 0xdfb00000-0xdfbfffff: good
pcib1: matched entry for 3.4.INTA (src \\_SB_.LNKA:0)
pcib1: slot 4 INTA routed to irq 11 via \\_SB_.LNKA
found-> vendor=0x8086, dev=0x103a, revid=0x81
bus=3, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base dfdf5000, size 12, enabled
pcib1: (null) requested memory range 0xdfdf5000-0xdfdf5fff: good
map[14]: type 4, range 32, base 0000c400, size 6, enabled
pcib1: (null) requested I/O range 0xc400-0xc43f: in range
pcib1: matched entry for 3.8.INTA (src \\_SB_.LNKE:0)
pcib1: slot 8 INTA routed to irq 10 via \\_SB_.LNKE
fwohci0: <Texas Instruments TSB12LV26> mem 0xdfdfd800-0xdfdfdfff,0xdfdf8000-0xdfdfbfff irq 10 at device 1.0 on pci3
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xdfdfd800
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:00:00:00:00:00:1a
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ahc0: <Adaptec 2940B Ultra2 SCSI adapter> port 0xcc00-0xccff mem 0xdfdff000-0xdfdfffff irq 10 at device 2.0 on pci3
ahc0: Defaulting to MEMIO on
ahc0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xdfdff000
ahc0: Reading SEEPROM...done.
ahc0: Manual SE Termination
ahc0: BIOS eeprom is present
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 424 instructions downloaded
ahc0: Features 0x56f6, Bugs 0x6, Flags 0x20485540
ahc0: [GIANT-LOCKED]
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
fxp0: <Intel 82558 Pro/100 Ethernet> port 0xc800-0xc81f mem 0xcf5ff000-0xcf5fffff,0xdfb00000-0xdfbfffff irq 11 at device 4.0 on pci3
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xcf5ff000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 8086 0009 0005
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:90:27:13:a4:48
fxp0: [MPSAFE]
fxp1: <Intel 82801DB (ICH4) Pro/100 Ethernet> port 0xc400-0xc43f mem 0xdfdf5000-0xdfdf5fff irq 10 at device 8.0 on pci3
fxp1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdfdf5000
fxp1: using memory space register mapping
fxp1: PCI IDs: 8086 103a 8086 1039 0081
fxp1: Dynamic Standby mode is disabled
miibus1: <MII bus> on fxp1
inphy1: <i82562ET 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: bpf attached
fxp1: Ethernet address: 00:10:dc:4d:bc:40
fxp1: [MPSAFE]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=00 ostat1=00
ata0: stat0=0x01 err=0x01 lsb=0x01 msb=0x01
ata0: stat1=0x01 err=0x01 lsb=0x01 msb=0x01
ata0: reset tp2 stat0=01 stat1=01 devices=0x0
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1: stat0=0x01 err=0x01 lsb=0x01 msb=0x01
ata1: stat1=0x01 err=0x01 lsb=0x01 msb=0x01
ata1: reset tp2 stat0=01 stat1=01 devices=0x0
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH4 (82801DB)> port 0xe000-0xe0ff,0xdc00-0xdc3f mem 0xdff7ba00-0xdff7bbff,0xdff7b900-0xdff7b9ff irq 10 at device 31.5 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe000
pcm0: Reserved 0x40 bytes for rid 0x14 type 4 at 0xdc00
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC202 AC97 Codec (id = 0x414c4740)>
pcm0: Codec features 20 bit DAC, 18 bit ADC, 5 bit master volume, Realtek 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, double rate PCM, reserved 1, AMAP, reserved 4
pcm0: sndbuf_setmap 1e951000, 4000; 0xdd533000 -> 1e951000
pcm0: sndbuf_setmap 1e94d000, 4000; 0xdd537000 -> 1e94d000
acpi_button1: <Sleep Button> on acpi0
fdc0: <floppy drive controller> port 0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
sio0: irq maps: 0x401 0x411 0x401 0x401
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: irq maps: 0x401 0x409 0x401 0x401
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1816988436 Hz quality 800
Timecounters tick every 0.788 msec
lo0: bpf attached
Waiting 15 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
pcm0: measured ac97 link rate at 48008 Hz, will use 48000 Hz
ahc0: Selection Timeout on A:1. 0 SCBs aborted
pid 21: corrected slot count (0->1)
ahc0: Selection Timeout on A:6. 0 SCBs aborted
ahc0: Selection Timeout on A:8. 0 SCBs aborted
ahc0: Selection Timeout on A:10. 0 SCBs aborted
ahc0: Selection Timeout on A:2. 0 SCBs aborted
ahc0: Selection Timeout on A:3. 0 SCBs aborted
ahc0: Selection Timeout on A:4. 0 SCBs aborted
ahc0: Selection Timeout on A:5. 0 SCBs aborted
ahc0: Selection Timeout on A:9. 0 SCBs aborted
ahc0: Selection Timeout on A:11. 0 SCBs aborted
ahc0: Selection Timeout on A:12. 0 SCBs aborted
ahc0: Selection Timeout on A:13. 0 SCBs aborted
ahc0: Selection Timeout on A:14. 0 SCBs aborted
ahc0: Selection Timeout on A:15. 0 SCBs aborted
(probe0:ahc0:0:0:0): Retrying Command
(ahc0:A:0:0): Sending WDTR 1
(ahc0:A:0:0): Received WDTR 1 filtered to 1
ahc0: target 0 using 16bit transfers
(ahc0:A:0:0): Sending SDTR period a, offset 7f
(ahc0:A:0:0): Received SDTR period a, offset 1e
Filtered to period a, offset 1e
ahc0: target 0 synchronous at 40.0MHz, offset = 0x1e
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <IBM-PSG DNES-309170W !# SAB0> Fixed Direct Access SCSI-3 device
pass0: Serial Number AJHRM821
pass0: 80.000MB/s transfers (40.000MHz, offset 30, 16bit), Tagged Queueing Enabled
GEOM: new disk da0
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM-PSG DNES-309170W !# SAB0> Fixed Direct Access SCSI-3 device
da0: Serial Number AJHRM821
da0: 80.000MB/s transfers (40.000MHz, offset 30, 16bit), Tagged Queueing Enabled
da0: 8678MB (17774160 512 byte sectors: 255H 63S/T 1106C)
Trying to mount root from ufs:/dev/da0s1a
start_init: trying /sbin/init
tun0: bpf attached
WARNING: attempt to net_add_domain(netgraph) after domainfinalize()
More information about the freebsd-current
mailing list