Help needed: Problems get Acer 4401LMi running perfect ...

Jens Rehsack rehsack at liwing.de
Sat Jul 16 20:21:24 GMT 2005


Hi all,

I've bought a new notebook - an Acer Travelmate 4401LMi.

Most things run fine with RELENG_6, but some things makes
still trouble.

- The ATI Radeon X700 PCI Express is not detected (not supported?)
  I've compiled drm and radeondrm into the kernel, but it seems not
  recognized.
- The on-board sound-chip and the on-board wlan isn't detected/supported
- Gnome didn't startup well
- ACPI shows some mysterious error messages that spam's the kernel log ;)
- USB Mouse must be plugged after boot finished to get recognized
  (Keyboard works fine)
- The video-mode in X can't be set to 1400x1050

I know, this is not the place to discuss all problems, but I don't want
to cross-post into to many lists. So I hope to solve the problems from
the system up to the applications may help get solutions for higher
level problems faster.

My questions (bootstrapping myself ^^):
- How can I check if/why the graphic card isn't supported by the kernel/X11?
- How can I check which sound driver is build in and what can be done to
  support it?
- Which kind of problem may prevent the usb-mouse detected during boot-up?
  (I think usbd didn't find it)
- What can be done to stop the acpi system (except disabling acpi) spamming
  the kernel log?

I attach the dmesg, verbose dmesg, kernel conf and pciconf -lv.

Thanks for any hint in advance.

Best regards,
Jens
-------------- next part --------------
#
# GENERIC -- Generic kernel configuration file for FreeBSD/amd64
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/amd64/conf/GENERIC,v 1.421.2.13 2005/05/10 22:45:14 anholt Exp $

machine		amd64
cpu		HAMMER
ident		KERMIT

#device		mptable

# To statically compile in device wiring instead of /boot/device.hints
#hints		"GENERIC.hints"		# Default places to look for devices.

options 	SCHED_4BSD		# 4BSD scheduler
options 	INET			# InterNETworking
options 	INET6			# IPv6 communications protocols
options 	FFS			# Berkeley Fast Filesystem
options 	SOFTUPDATES		# Enable FFS soft updates support
options 	UFS_ACL			# Support for access control lists
options 	UFS_DIRHASH		# Improve performance on big directories
#options 	MD_ROOT			# MD is a potential root device
options 	NFSCLIENT		# Network Filesystem Client
#options 	NFSSERVER		# Network Filesystem Server
#options 	NFS_ROOT		# NFS usable as /, requires NFSCLIENT
#options 	NTFS			# NT File System
options 	MSDOSFS			# MSDOS Filesystem
options 	MSDOSFS_LARGE
options 	MSDOSFS_ICONV
options 	CD9660			# ISO 9660 Filesystem
options 	CD9660_ICONV
options 	UDF
options 	UDF_ICONV
options 	PROCFS			# Process filesystem (requires PSEUDOFS)
options 	PSEUDOFS		# Pseudo-filesystem framework
options 	GEOM_GPT		# GUID Partition Tables.
options 	COMPAT_43		# Needed by COMPAT_LINUX32
options 	COMPAT_IA32		# Compatible with i386 binaries
options 	COMPAT_FREEBSD4		# Compatible with FreeBSD4
options 	COMPAT_LINUX32		# Compatible with i386 linux binaries 
options 	SCSI_DELAY=15000	# Delay (in ms) before probing SCSI
options 	KTRACE			# ktrace(1) support
options 	SYSVSHM			# SYSV-style shared memory
options 	SYSVMSG			# SYSV-style message queues
options 	SYSVSEM			# SYSV-style semaphores
options 	_KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
options 	ADAPTIVE_GIANT		# Giant mutex is adaptive.

# Workarounds for some known-to-be-broken chipsets (nVidia nForce3-Pro150)
device		atpic		# 8259A compatability

options 	IPI_PREEMPTION
device		mptable

# Enabling NO_MIXED_MODE gives a performance improvement on some motherboards
# but does not work with some boards (mostly nVidia chipset based).
#options 	NO_MIXED_MODE	# Don't penalize working chipsets

# Linux 32-bit ABI support
options 	LINPROCFS		# Cannot be a module yet.

options         LIBICONV
options         TTYHOG=8193
options         PREEMPTION

# Debugging for use in -current
options         DDB                     #Enable the DDB Backend
options         KDB                     #Enable the kernel debugger
options         KDB_TRACE
options         BREAK_TO_DEBUGGER
# options       INVARIANTS              #Enable calls of extra sanity checking
# options       INVARIANT_SUPPORT       #Extra sanity checks of internal structures, required by INVARIANTS
# options       WITNESS                 #Enable checks to detect deadlocks and cycles
# options       WITNESS_KDB
#options      WITNESS_SKIPSPIN        #Don't run witness on spinlocks for speed
# options       DIAGNOSTIC

# Bus support.  Do not remove isa, even if you have no isa slots
device		acpi
device		isa
device		pci

# Floppy drives
#device		fdc

# ATA and ATAPI devices
device		ata
device		atadisk		# ATA disk drives
#device		ataraid		# ATA RAID drives
device		atapicd		# ATAPI CDROM drives
#device		atapifd		# ATAPI floppy drives
#device		atapist		# ATAPI tape drives
options 	ATA_STATIC_ID	# Static device numbering
device		atapicam

# SCSI peripherals
device		scbus		# SCSI bus (required for SCSI)
#device		ch		# SCSI media changers
device		da		# Direct Access (disks)
#device		sa		# Sequential Access (tape etc)
device		cd		# CD
device		pass		# Passthrough device (direct SCSI access)
#device		ses		# SCSI Environmental Services (and SAF-TE)

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc		# AT keyboard controller
device		atkbd		# AT keyboard
device		psm		# PS/2 mouse

device		vga		# VGA video card driver

#device		splash		# Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device		sc

device		agp		# support several AGP chipsets
device		drm
device		radeondrm

# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
device		cbb		# cardbus (yenta) bridge
device		pccard		# PC Card (16-bit) bus
device		cardbus		# CardBus (32-bit) bus

# Serial (COM) ports
device		sio		# 8250, 16[45]50 based serial ports

# Parallel port
device		ppc
device		ppbus		# Parallel port bus (required)
device		lpt		# Printer
device		plip		# TCP/IP over parallel
device		ppi		# Parallel port interface device
#device		vpo		# Requires scbus and da

# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to the sio and/or ppc drivers):
#device		puc

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device		miibus		# MII bus support
device		re		# RealTek 8139C+/8169/8169S/8110S

# Wireless NIC cards
device		ath
device		ath_hal
device		ath_rate_onoe
#device		ath_rate_amrr
#device		ath_rate_sample
device		wlan		# 802.11 support
device		an		# Aironet 4500/4800 802.11 wireless NICs.
device		awi		# BayStack 660 and others
device		wi		# WaveLAN/Intersil/Symbol 802.11 wireless NICs.

device		sound

device		smbus
device		viapm
device		nfpm
device		amdpm
device		iicsmb
device		smb

device		iicbus
device		iicbb


# Pseudo devices.
device		loop		# Network loopback
device		mem		# Memory and kernel memory devices
device		io		# I/O device
device		random		# Entropy device
device		ether		# Ethernet support
device		sl		# Kernel SLIP
device		ppp		# Kernel PPP
device		tun		# Packet tunnel.
device		pty		# Pseudo-ttys (telnet etc)
device		md		# Memory "disks"
device		gif		# IPv6 and IPv4 tunneling
device		faith		# IPv6-to-IPv4 relaying (translation)

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device		bpf		# Berkeley packet filter

# USB support
device		uhci		# UHCI PCI->USB interface
device		ohci		# OHCI PCI->USB interface
#device		ehci		# EHCI PCI->USB interface (USB 2.0)
device		usb		# USB Bus (required)
#device		udbp		# USB Double Bulk Pipe devices
device		ugen		# Generic
device		uhid		# "Human Interface Devices"
device		ukbd		# Keyboard
device		ulpt		# Printer
device		umass		# Disks/Mass storage - Requires scbus and da
device		ums		# Mouse
device		urio		# Diamond Rio 500 MP3 player
device		uscanner	# Scanners

# FireWire support
device		firewire	# FireWire bus code
device		sbp		# SCSI over FireWire (Requires scbus and da)
device		fwe		# Ethernet over FireWire (non-standard!)
-------------- next part --------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA1 #0: Fri Jul 15 22:38:58 UTC 2005
    root at kermit.muppets.liwing.de:/usr/obj/usr/src/sys/KERMIT
ACPI APIC Table: <PTLTD  	 APIC  >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Turion(tm) 64 Mobile Technology ML-28 (1600.01-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x20f42  Stepping = 2
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x1<SSE3>
  AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
real memory  = 1072300032 (1022 MB)
avail memory = 1025826816 (978 MB)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
acpi0: <PTLTD   RSDT> on motherboard
acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 21
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 0 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 0 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 0 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 0 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 0 on acpi0
acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 on acpi0
    ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
    ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xffffff00008d7dc0), AE_NO_HARDWARE_RESPONSE
    ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xffffff00008d7dc0), AE_NO_HARDWARE_RESPONSE
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci9: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci4: <ACPI PCI bus> on pcib3
ohci0: <OHCI (generic) USB controller> mem 0xc0000000-0xc0000fff irq 19 at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xc0001000-0xc0001fff irq 19 at device 19.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
pci0: <serial bus, USB> at device 19.2 (no driver attached)
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8410-0x841f irq 16 at device 20.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci6: <ACPI PCI bus> on pcib4
pci6: <network> at device 5.0 (no driver attached)
cbb0: <PCI-CardBus Bridge> at device 6.0 on pci6
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem 0xc0208000-0xc02087ff,0xc0200000-0xc0203fff irq 22 at device 6.2 on pci6
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 12:34:56:78:12:34:56:78
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 12:34:56:34:56:78
fwe0: Ethernet address: 12:34:56:34:56:78
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci6: <mass storage> at device 6.3 (no driver attached)
pci6: <base peripheral> at device 6.4 (no driver attached)
re0: <RealTek 8169SB Single-chip Gigabit Ethernet> port 0xa000-0xa0ff mem 0xc0209400-0xc02094ff irq 23 at device 7.0 on pci6
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
re0: Ethernet address: 00:0a:e4:e1:00:fa
pci0: <multimedia, audio> at device 20.5 (no driver attached)
pci0: <simple comms, generic modem> at device 20.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sio0 port 0x2f8-0x2ff irq 3 drq 3 flags 0x10 on acpi0
sio0: type 16550A
acpi_cmbat0: <Control Method Battery> on acpi0
    ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
    ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xffffff00008d7dc0), AE_NO_HARDWARE_RESPONSE
    ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xffffff00008d7dc0), AE_NO_HARDWARE_RESPONSE
acpi_acad0: <AC Adapter> on acpi0
orm0: <ISA Option ROM> at iomem 0xdc000-0xdffff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1600011243 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 76319MB <Seagate ST9808210A 3.01> at ata0-master UDMA33
acd0: DVDR <TSSTcorpCD/DVDW TS-L632B/TI30> at ata1-master UDMA33
    ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
    ACPI-1304: *** Error: Method execution failed [\\_TZ_.TZS0._TMP] (Node 0xffffff000000d480), AE_NO_HARDWARE_RESPONSE
Trying to mount root from ufs:/dev/ad0s1a
    ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
    ACPI-1304: *** Error: Method execution failed [\\_TZ_.TZS1._TMP] (Node 0xffffff000000d200), AE_NO_HARDWARE_RESPONSE
    ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
    ACPI-1304: *** Error: Method execution failed [\\_TZ_.TZSV._TMP] (Node 0xffffff00008ae180), AE_NO_HARDWARE_RESPONSE
    ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
    ACPI-1304: *** Error: Method execution failed [\\_TZ_.TZSV._TMP] (Node 0xffffff00008ae180), AE_NO_HARDWARE_RESPONSE
    ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
    ACPI-1304: *** Error: Method execution failed [\\_TZ_.TZSV._TMP] (Node 0xffffff00008ae180), AE_NO_HARDWARE_RESPONSE
    ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
    ACPI-1304: *** Error: Method execution failed [\\_TZ_.TZSV._TMP] (Node 0xffffff00008ae180), AE_NO_HARDWARE_RESPONSE
-------------- next part --------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA1 #0: Fri Jul 15 22:38:58 UTC 2005
    root at kermit.muppets.liwing.de:/usr/obj/usr/src/sys/KERMIT
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8079a000.
ACPI APIC Table: <PTLTD  	 APIC  >
Calibrating clock(s) ... i8254 clock: 1193179 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1600010552 Hz
CPU: AMD Turion(tm) 64 Mobile Technology ML-28 (1600.01-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x20f42  Stepping = 2
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x1<SSE3>
  AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory  = 1072300032 (1022 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages)
0x0000000000897000 - 0x000000003e069fff, 1031614464 bytes (251859 pages)
avail memory = 1025826816 (978 MB)
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 21
ioapic0: intpin 9 disabled
ioapic0: intpin 21 trigger: level
ioapic0: intpin 21 polarity: low
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
ioapic0 <Version 2.1> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00050010 LDR: 0x01000000 DFR: 0x0fffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ath_rate: <Atsushi Onoe's rate control algorithm>
wlan: <802.11 Link Layer>
mem: <memory>
null: <null device, zero device>
nfslock: pseudo-device
random: <entropy source, Software, Yarrow>
io: <I/O>
ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
acpi0: <PTLTD   RSDT> on motherboard
acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 21
acpi0: [MPSAFE]
pci_open(1):	mode 1 addr port (0x0cf8) is 0x8000a104
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=59501002)
AcpiOsDerivePciId: bus 0 dev 20 func 1
AcpiOsDerivePciId: bus 4 dev 0 func 0
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 0 on acpi0
pci_link0: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  10 11
pci_link0: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  10 11
pci_link0: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  10 11
pci_link1: <ACPI PCI Link LNKB> irq 0 on acpi0
pci_link1: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  10 11
pci_link1: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  10 11
pci_link1: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  10 11
pci_link2: <ACPI PCI Link LNKC> irq 0 on acpi0
pci_link2: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  10 11
pci_link2: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  10 11
pci_link2: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  10 11
pci_link3: <ACPI PCI Link LNKD> irq 0 on acpi0
pci_link3: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  10 11
pci_link3: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  10 11
pci_link3: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  10 11
pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0
pci_link4: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  10 11
pci_link4: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  10 11
pci_link4: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  10 11
pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
pci_link5: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  10 11
pci_link5: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  10 11
pci_link5: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  10 11
pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0
pci_link6: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  10 11
pci_link6: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  10 11
pci_link6: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  10 11
pci_link7: <ACPI PCI Link LNKH> irq 0 on acpi0
pci_link7: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  10 11
pci_link7: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  10 11
pci_link7: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  10 11
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 on acpi0
acpi_ec0: info: new max delay is 11000 us
acpi_ec0: info: new max delay is 101000 us
acpi_ec0: EcRead: Failed waiting for EC to send data.
    ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
    ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xffffff00008d7dc0), AE_NO_HARDWARE_RESPONSE
    ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xffffff00008d7dc0), AE_NO_HARDWARE_RESPONSE
ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found->	vendor=0x1002, dev=0x5950, revid=0x01
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2220, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1002, dev=0x5a34, revid=0x00
	bus=0, slot=2, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1002, dev=0x5a39, revid=0x00
	bus=0, slot=7, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1002, dev=0x4374, revid=0x00
	bus=0, slot=19, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0017, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	MSI supports 1 message
	map[10]: type 1, range 32, base c0000000, size 12, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 19
found->	vendor=0x1002, dev=0x4375, revid=0x00
	bus=0, slot=19, func=1
	class=0c-03-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0017, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	MSI supports 1 message
	map[10]: type 1, range 32, base c0001000, size 12, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 19
found->	vendor=0x1002, dev=0x4373, revid=0x00
	bus=0, slot=19, func=2
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0013, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	MSI supports 1 message
	map[10]: type 1, range 32, base c0002000, size 12, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 19
found->	vendor=0x1002, dev=0x4372, revid=0x11
	bus=0, slot=20, func=0
	class=0c-05-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0003, statreg=0x0230, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 4, range 32, base 00008400, size  4, enabled
	map[14]: type 1, range 32, base c0003000, size 10, enabled
found->	vendor=0x1002, dev=0x4376, revid=0x00
	bus=0, slot=20, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0230, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	MSI supports 1 message
	map[20]: type 4, range 32, base 00008410, size  4, enabled
pcib0: matched entry for 0.20.INTA
pcib0: slot 20 INTA hardwired to IRQ 16
found->	vendor=0x1002, dev=0x4377, revid=0x00
	bus=0, slot=20, func=3
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1002, dev=0x4371, revid=0x00
	bus=0, slot=20, func=4
	class=06-04-01, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x02a0, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1002, dev=0x4370, revid=0x02
	bus=0, slot=20, func=5
	class=04-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0017, statreg=0x0430, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	MSI supports 1 message
	map[10]: type 1, range 32, base c0003400, size  8, enabled
pcib0: matched entry for 0.20.INTB
pcib0: slot 20 INTB hardwired to IRQ 17
found->	vendor=0x1002, dev=0x4378, revid=0x02
	bus=0, slot=20, func=6
	class=07-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0017, statreg=0x0430, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	MSI supports 1 message
	map[10]: type 1, range 32, base c0003800, size  8, enabled
pcib0: matched entry for 0.20.INTB
pcib0: slot 20 INTB hardwired to IRQ 17
found->	vendor=0x1022, dev=0x1100, revid=0x00
	bus=0, slot=24, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1101, revid=0x00
	bus=0, slot=24, func=1
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1102, revid=0x00
	bus=0, slot=24, func=2
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1103, revid=0x00
	bus=0, slot=24, func=3
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x9000-0x9fff
pcib1:   memory decode     0xc0100000-0xc01fffff
pcib1:   prefetched decode 0xc8000000-0xcfffffff
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found->	vendor=0x1002, dev=0x5653, revid=0x00
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type 3, range 32, base c8000000, size 27, enabled
pcib1: (null) requested memory range 0xc8000000-0xcfffffff: good
	map[14]: type 4, range 32, base 00009000, size  8, enabled
pcib1: (null) requested I/O range 0x9000-0x90ff: in range
	map[18]: type 1, range 32, base c0100000, size 16, enabled
pcib1: (null) requested memory range 0xc0100000-0xc010ffff: good
pcib1: matched entry for 1.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 18
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pcib2:   secondary bus     4
pcib2:   subordinate bus   5
pcib2:   I/O decode        0x0-0x0
pcib2:   memory decode     0x0-0x0
pcib2:   prefetched decode 0x0-0x0
pci4: <ACPI PCI bus> on pcib2
pci4: physical bus=4
ohci0: <OHCI (generic) USB controller> mem 0xc0000000-0xc0000fff irq 19 at device 19.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc0000000
ohci0: (New OHCI DeviceId=0x43741002)
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xc0001000-0xc0001fff irq 19 at device 19.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc0001000
ohci1: (New OHCI DeviceId=0x43751002)
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
pci0: <serial bus, USB> at device 19.2 (no driver attached)
pci0:19:2: Transition from D0 to D3
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8410-0x841f irq 16 at device 20.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8410
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pcib3:   secondary bus     6
pcib3:   subordinate bus   6
pcib3:   I/O decode        0xa000-0xafff
pcib3:   memory decode     0xc0200000-0xc02fffff
pcib3:   prefetched decode 0xfff00000-0xfffff
pcib3:   Subtractively decoded bridge.
pci6: <ACPI PCI bus> on pcib3
pci6: physical bus=6
found->	vendor=0x14e4, dev=0x4318, revid=0x02
	bus=6, slot=5, func=0
	class=02-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[10]: type 1, range 32, base c0204000, size 13, enabled
pcib3: (null) requested memory range 0xc0204000-0xc0205fff: good
pcib3: matched entry for 6.5.INTA
pcib3: slot 5 INTA hardwired to IRQ 21
found->	vendor=0x104c, dev=0x8031, revid=0x00
	bus=6, slot=6, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base 00000000, size 12, enabled
found->	vendor=0x104c, dev=0x8032, revid=0x00
	bus=6, slot=6, func=2
	class=0c-00-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
	intpin=c, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base c0208000, size 11, enabled
pcib3: (null) requested memory range 0xc0208000-0xc02087ff: good
	map[14]: type 1, range 32, base c0200000, size 14, enabled
pcib3: (null) requested memory range 0xc0200000-0xc0203fff: good
pcib3: matched entry for 6.6.INTC
pcib3: slot 6 INTC hardwired to IRQ 22
found->	vendor=0x104c, dev=0x8033, revid=0x00
	bus=6, slot=6, func=3
	class=01-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base c0206000, size 13, enabled
pcib3: (null) requested memory range 0xc0206000-0xc0207fff: good
pcib3: matched entry for 6.6.INTA
pcib3: slot 6 INTA hardwired to IRQ 20
found->	vendor=0x104c, dev=0x8034, revid=0x00
	bus=6, slot=6, func=4
	class=08-05-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base c0209000, size  8, enabled
pcib3: (null) requested memory range 0xc0209000-0xc02090ff: good
	map[14]: type 1, range 32, base c0208c00, size  8, enabled
pcib3: (null) requested memory range 0xc0208c00-0xc0208cff: good
	map[18]: type 1, range 32, base c0208800, size  8, enabled
pcib3: (null) requested memory range 0xc0208800-0xc02088ff: good
pcib3: matched entry for 6.6.INTA
pcib3: slot 6 INTA hardwired to IRQ 20
found->	vendor=0x10ec, dev=0x8169, revid=0x10
	bus=6, slot=7, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0017, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000a000, size  8, enabled
pcib3: (null) requested I/O range 0xa000-0xa0ff: in range
	map[14]: type 1, range 32, base c0209400, size  8, enabled
pcib3: (null) requested memory range 0xc0209400-0xc02094ff: good
pcib3: matched entry for 6.7.INTA
pcib3: slot 7 INTA hardwired to IRQ 23
pci6: <network> at device 5.0 (no driver attached)
cbb0: <PCI-CardBus Bridge> at device 6.0 on pci6
pcib3: cbb0 requested memory range 0xc0200000-0xc02fffff: good
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xc020a000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib3: matched entry for 6.6.INTA
pcib3: slot 6 INTA hardwired to IRQ 20
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
  0x00: 0x8031104c 0x02100007 0x06070000 0x00824010 
  0x10: 0xc020a000 0x020000a0 0x20080706 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x07400114 
  0x40: 0x00801025 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x0844d061 0x02920019 0x001f0000 0x010a1b22 
  0x90: 0x606402c0 0x00000000 0x00000000 0x00000000 
  0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
fwohci0: vendor=104c, dev=8032
fwohci0: vendor=104c, dev=8032
fwohci0: <1394 Open Host Controller Interface> mem 0xc0208000-0xc02087ff,0xc0200000-0xc0203fff irq 22 at device 6.2 on pci6
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xc0208000
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 12:34:56:78:12:34:56:78
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 12:34:56:34:56:78
fwe0: bpf attached
fwe0: Ethernet address: 12:34:56:34:56:78
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci6: <mass storage> at device 6.3 (no driver attached)
pci6:6:3: Transition from D0 to D3
pci6: <base peripheral> at device 6.4 (no driver attached)
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xa000
pcib3: re0 requested I/O range 0xa000-0xa0ff: in range
pcib3: re0 requested I/O range 0xa000-0xa0ff: in range
pcib3: re0 requested I/O range 0xa000-0xa0ff: in range
pcib3: re0 requested I/O range 0xa000-0xa0ff: in range
pcib3: re0 requested I/O range 0xa000-0xa0ff: in range
re0: <RealTek 8169SB Single-chip Gigabit Ethernet> port 0xa000-0xa0ff mem 0xc0209400-0xc02094ff irq 23 at device 7.0 on pci6
pcib3: re0 requested I/O range 0xa000-0xa0ff: in range
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
re0: bpf attached
re0: Ethernet address: 00:0a:e4:e1:00:fa
re0: [MPSAFE]
pci0: <multimedia, audio> at device 20.5 (no driver attached)
pci0: <simple comms, generic modem> at device 20.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
sio0: irq maps: 0x1 0x9 0x1 0x1
sio0 port 0x2f8-0x2ff irq 3 drq 3 flags 0x10 on acpi0
sio0: type 16550A
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_ec0: EcRead: Failed waiting for EC to send data.
    ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
    ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xffffff00008d7dc0), AE_NO_HARDWARE_RESPONSE
    ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xffffff00008d7dc0), AE_NO_HARDWARE_RESPONSE
acpi_acad0: <AC Adapter> on acpi0
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xdc000-0xdffff on isa0
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
linprocfs registered
lapic: Divisor 2, Frequency 100000419 hz
Timecounter "TSC" frequency 1600010552 Hz quality 800
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
acpi_cmbat0: battery initialization start
acpi_acad0: acline initialization start
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: 76319MB <Seagate ST9808210A 3.01> at ata0-master UDMA33
ad0: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acd0: <TSSTcorpCD/DVDW TS-L632B/TI30> DVDR drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM unknown
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
ioapic0: routing intpin 20 (PCI IRQ 20) to cluster 0
ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0
ioapic0: routing intpin 22 (PCI IRQ 22) to cluster 0
ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0
Trying to mount root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
acpi_ec0: EcRead: Failed waiting for EC to send data.
    ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
    ACPI-1304: *** Error: Method execution failed [\\_TZ_.TZS1._TMP] (Node 0xffffff000000d200), AE_NO_HARDWARE_RESPONSE
acpi_tz1: error fetching current temperature -- AE_NO_HARDWARE_RESPONSE
acpi_ec0: EcRead: Failed waiting for EC to send data.
    ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
    ACPI-1304: *** Error: Method execution failed [\\_TZ_.TZSV._TMP] (Node 0xffffff00008ae180), AE_NO_HARDWARE_RESPONSE
acpi_tz2: error fetching current temperature -- AE_NO_HARDWARE_RESPONSE
-------------- next part --------------
hostb0 at pci0:0:0:	class=0x060000 card=0x00801025 chip=0x59501002 rev=0x01 hdr=0x00
    vendor   = 'ATI Technologies Inc'
    class    = bridge
    subclass = HOST-PCI
pcib1 at pci0:2:0:	class=0x060400 card=0x00000050 chip=0x5a341002 rev=0x00 hdr=0x01
    vendor   = 'ATI Technologies Inc'
    class    = bridge
    subclass = PCI-PCI
pcib2 at pci0:6:0:	class=0x060400 card=0x00000050 chip=0x5a381002 rev=0x00 hdr=0x01
    vendor   = 'ATI Technologies Inc'
    class    = bridge
    subclass = PCI-PCI
pcib3 at pci0:7:0:	class=0x060400 card=0x00000050 chip=0x5a391002 rev=0x00 hdr=0x01
    vendor   = 'ATI Technologies Inc'
    class    = bridge
    subclass = PCI-PCI
ohci0 at pci0:19:0:	class=0x0c0310 card=0x00801025 chip=0x43741002 rev=0x00 hdr=0x00
    vendor   = 'ATI Technologies Inc'
    class    = serial bus
    subclass = USB
ohci1 at pci0:19:1:	class=0x0c0310 card=0x00801025 chip=0x43751002 rev=0x00 hdr=0x00
    vendor   = 'ATI Technologies Inc'
    class    = serial bus
    subclass = USB
none0 at pci0:19:2:	class=0x0c0320 card=0x00801025 chip=0x43731002 rev=0x00 hdr=0x00
    vendor   = 'ATI Technologies Inc'
    class    = serial bus
    subclass = USB
none1 at pci0:20:0:	class=0x0c0500 card=0x00801025 chip=0x43721002 rev=0x11 hdr=0x00
    vendor   = 'ATI Technologies Inc'
    class    = serial bus
    subclass = SMBus
atapci0 at pci0:20:1:	class=0x01018a card=0x00801025 chip=0x43761002 rev=0x00 hdr=0x00
    vendor   = 'ATI Technologies Inc'
    class    = mass storage
    subclass = ATA
isab0 at pci0:20:3:	class=0x060100 card=0x00801025 chip=0x43771002 rev=0x00 hdr=0x00
    vendor   = 'ATI Technologies Inc'
    class    = bridge
    subclass = PCI-ISA
pcib4 at pci0:20:4:	class=0x060401 card=0x00000000 chip=0x43711002 rev=0x00 hdr=0x01
    vendor   = 'ATI Technologies Inc'
    class    = bridge
    subclass = PCI-PCI
none2 at pci0:20:5:	class=0x040100 card=0x00791025 chip=0x43701002 rev=0x02 hdr=0x00
    vendor   = 'ATI Technologies Inc'
    class    = multimedia
    subclass = audio
none3 at pci0:20:6:	class=0x070300 card=0x00801025 chip=0x43781002 rev=0x02 hdr=0x00
    vendor   = 'ATI Technologies Inc'
    class    = simple comms
    subclass = generic modem
hostb1 at pci0:24:0:	class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'Athlon 64 / Opteron HyperTransport Technology Configuration'
    class    = bridge
    subclass = HOST-PCI
hostb2 at pci0:24:1:	class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'Athlon 64 / Opteron Address Map'
    class    = bridge
    subclass = HOST-PCI
hostb3 at pci0:24:2:	class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'Athlon 64 / Opteron DRAM Controller'
    class    = bridge
    subclass = HOST-PCI
hostb4 at pci0:24:3:	class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'Athlon 64 / Opteron Miscellaneous Control'
    class    = bridge
    subclass = HOST-PCI
none4 at pci1:0:0:	class=0x030000 card=0x00801025 chip=0x56531002 rev=0x00 hdr=0x00
    vendor   = 'ATI Technologies Inc'
    device   = 'MOBILITY RADEON X700'
    class    = display
    subclass = VGA
none5 at pci6:5:0:	class=0x028000 card=0x03111468 chip=0x431814e4 rev=0x02 hdr=0x00
    vendor   = 'Broadcom Corporation'
    class    = network
cbb0 at pci6:6:0:	class=0x060700 card=0x00801025 chip=0x8031104c rev=0x00 hdr=0x02
    vendor   = 'Texas Instruments (TI)'
    class    = bridge
    subclass = PCI-CardBus
fwohci0 at pci6:6:2:	class=0x0c0010 card=0x00801025 chip=0x8032104c rev=0x00 hdr=0x00
    vendor   = 'Texas Instruments (TI)'
    class    = serial bus
    subclass = FireWire
none6 at pci6:6:3:	class=0x018000 card=0x00801025 chip=0x8033104c rev=0x00 hdr=0x00
    vendor   = 'Texas Instruments (TI)'
    device   = 'PCIxx21 Integrated FlashMedia Controller'
    class    = mass storage
none7 at pci6:6:4:	class=0x080500 card=0x00801025 chip=0x8034104c rev=0x00 hdr=0x00
    vendor   = 'Texas Instruments (TI)'
    class    = base peripheral
re0 at pci6:7:0:	class=0x020000 card=0x00791025 chip=0x816910ec rev=0x10 hdr=0x00
    vendor   = 'Realtek Semiconductor'
    device   = 'RTL8169 Gigabit Ethernet Adapter'
    class    = network
    subclass = ethernet


More information about the freebsd-current mailing list