ath bridge panic

[Vitaly]

Vitaly пишет:

> problem on FreeBSD 6.0-BETA1
> ath0 is  bridge with fxp0
> panic occured when i connect wireless client to my hostap, client -  
> FujitsuSiemens PocketLOOX720 with internal 11b adapter
>
> when his connecting i get next messages
>
>> couldn't m_pullup
>> couldn't m_pullup
>> couldn't m_pullup
>
>
> and first ping kill my system
> what i need to get more information about this?
>
>> Fatal trap 12: page fault while in kernel mode
>> fault virtual address   = 0x10
>> fault code              = supervisor read, page not present
>> instruction pointer     = 0x20:0xc06bef70
>> stack pointer           = 0x28:0xd274c85c
>> frame pointer           = 0x28:0x0
>> code segment            = base 0x0, limit 0xfffff, type 0x1b
>>                         = DPL 0, pres 1, def32 1, gran 1
>> processor eflags        = interrupt enabled, resume, IOPL = 0
>> current process         = 27 (swi1: net)
>> trap number             = 12
>> panic: page fault
>> Uptime: 4m41s
>> Dumping 191 MB (2 chunks)
>>   chunk 0: 1MB (159 pages) ... ok
>>   chunk 1: 191MB (48893 pages) 176 160 144 128 112 96 80 64 48 32 16 
>> ... ok
>
>
>
>
>> net.link.ether.bridge.enable: 0 -> 1
>> net.link.ether.bfridge.config: xp0: promiscuous mode enabled
>> ath0: promiscuous mode enabled
>> fxp0: link state changed to UP
>>  -> fxp0:2,ath0:2
>> fxp1: link state changed to UP
>> fxp0: 
>> flags=18943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST,POLLING> 
>> mtu 1500
>>         options=48<VLAN_MTU,POLLING>
>>         inet 192.168.7.1 netmask 0xffffff00 broadcast 192.168.7.255
>>         ether 00:04:ac:d7:bd:24
>>         media: Ethernet autoselect (100baseTX <full-duplex>)
>>         status: active
>> ath0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 
>> 1500
>>         ether 00:0f:3d:a9:4e:20
>>         media: IEEE 802.11 Wireless Ethernet autoselect mode 11g 
>> <hostap>
>>         status: associated
>>         ssid D2HOME channel 6 bssid 00:0f:3d:a9:4e:20
>>         authmode OPEN privacy ON deftxkey 1
>>         wepkey 1:104-bit
>>         txpowmax 39 rtsthreshold 2346 protmode CTS dtimperiod 1 
>> bintval 100
>
>
Problem still exists, what I must do?