if_dc panics with 3Com OfficeConnect 10/100B PCI

Viren Shah virenshah at gmail.com
Tue Aug 16 14:11:51 GMT 2005


On 8/16/05, Giorgos Keramidas <keramida at freebsd.org> wrote:
<snip>
> When I compile the ``dc'' driver into my kernel or load it as a module
> though, a relatively recent CURRENT (updated yesterday, 14 Aug 2005)
> panics after a port mapping failure.
> 
> The same panic happens when the device is configured into the kernel or
> when I kldload if_dc.  Is anyone else using ``dc'' interfaces on CURRENT
> and seeing similar problems?

I'm running a -current kernel from today morning just fine. 

bandersnatch# ifconfig dc0
dc0: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
        options=8<VLAN_MTU>
        inet6 fe80::210:a4ff:fe7b:e2f4%dc0 prefixlen 64 scopeid 0x3
        inet 192.168.2.127 netmask 0xffffff00 broadcast 192.168.2.255
        ether 00:10:a4:7b:e2:f4
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active

FreeBSD bandersnatch.virtc.com 7.0-CURRENT FreeBSD 7.0-CURRENT #6: Tue
Aug 16 06:23:46 EDT 2005    
root at bandersnatch.virtc.com:/usr/obj/usr/src/sys/BANDERSNATCH  i386

The dc driver is compiled into the kernel

Viren


> - Giorgos


More information about the freebsd-current mailing list