task queue: supervisor write, page not present
Doug White
dwhite at gumbysoft.com
Fri Apr 15 09:55:50 PDT 2005
On Tue, 12 Apr 2005, Daniel Eriksson wrote:
>
> This is the third time in 4 days that I get the following crash on one of my
> servers. It's a dual AthlonMP machine, and at the time of the crash it
> wasn't doing much at all (running a few instances of a proprietary video
> server app). There's a dmesg at the bottom too.
>
> The log below is from a system running CURRENT from earlier today
> (2005.04.12.06.30.00). The other two crashes happened using sources dated
> 2005.04.08.04.00.00.
Can you get a crashdump and inspect the taskq with gdb? I'm assuming
there's a bogus entry thats getting tripped over.
>
> /Daniel Eriksson
>
> Fatal trap 12: page fault while in kernel mode
> cpuid = 0; apic id = 01
> fault virtual address = 0xc2b760b4
> fault code = supervisor write, page not present
> instruction pointer = 0x8:0xc0578f53
> stack pointer = 0x10:0xe09e7ca4
> frame pointer = 0x10:0xe09e7ccc
> code segment = base 0x0, limit 0xfffff, type 0x1b
> = DPL 0, pres 1, def32 1, gran 1
> processor eflags = interrupt enabled, resume, IOPL = 0
> current process = 40 (swi6: task queue)
> [thread pid 40 tid 100036 ]
> Stopped at taskqueue_run+0x123: andl $-0x2,0x14(%ebx)
> db> where
> Tracing pid 40 tid 100036 td 0xc1eccd80
> taskqueue_run(c1f3c180,e09e7d14,c053a678,0,0) at taskqueue_run+0x123
> taskqueue_swi_run(0,0,0,0,0) at taskqueue_swi_run+0x13
> ithread_loop(c1ed9180,e09e7d48,0,0,0) at ithread_loop+0x1a8
> fork_exit(c053a4d0,c1ed9180,e09e7d48) at fork_exit+0x80
> fork_trampoline() at fork_trampoline+0x8
> --- trap 0x1, eip = 0, esp = 0xe09e7d7c, ebp = 0 ---
> db> ps
> pid proc uid ppid pgrp flag stat wmesg wchan cmd
> 11120 c25bb7f0 0 612 11120 0004100 [CPU 1] mcvidserv
> 10639 c28c09ec 0 612 10639 0004100 [SLPQ biord 0xd17c6b30][SLP]
> mcvidserv
> 10532 c3e9a1fc 0 612 10532 0004100 [SLPQ sbwait 0xc2456cb4][SLP]
> mcvidserv
> 7902 c250e5f4 0 612 7902 0004100 [SLPQ sbwait 0xc2284cb4][SLP]
> mcvidserv
> 1725 c2814be8 0 612 1725 0004100 [SLPQ nanslp 0xc07930ac][SLP]
> mcvidserv
> 3372 c28bd9ec 0 533 533 0000101 [SLPQ select 0xc0799c04][SLP] smbd
> 860 c25b57f0 0 850 860 0004002 [SLPQ nanslp 0xc07930ac][SLP] mfk
> 850 c2814de4 0 849 850 0004002 [SLPQ pause 0xc2814e18][SLP] csh
> 849 c25b59ec 0 1 849 0000000 [SLPQ select 0xc0799c04][SLP] screen
> 771 c28c03f8 1001 1 771 0000002 [SLPQ select 0xc0799c04][SLP] ctrail
> 720 c28145f4 0 1 720 0000000 [SLPQ ggwait 0xc27b6000][SLP] ggatec
> 714 c212b1fc 0 1 714 0000000 [SLPQ ggwait 0xc27ac000][SLP] ggatec
> 705 c218c9ec 0 1 705 0000000 [SLPQ ggwait 0xc27b5000][SLP] ggatec
> 696 c25bb000 0 1 696 0000000 [SLPQ ggwait 0xc2773000][SLP] ggatec
> 685 c25b53f8 0 1 685 0000000 [SLPQ ggwait 0xc215c000][SLP] ggatec
> 678 c25b5de4 0 1 678 0000000 [SLPQ ggwait 0xc2506000][SLP] ggatec
> 635 c25b5be8 0 0 0 0000204 [SLPQ - 0xc1f47000][SLP] g_bde
> da0s1g.bde
> 627 c250e9ec 0 0 0 0000204 [SLPQ - 0xc218e000][SLP] gv_v 480GB
> 626 c25bb1fc 0 0 0 0000204 [SLPQ - 0xc1f88a00][SLP] gv_p
> 480GB.p0
> 625 c25bb3f8 0 0 0 0000204 [SLPQ - 0xc25b9c00][SLP] gv_d vd2
> 624 c25bb5f4 0 0 0 0000204 [SLPQ - 0xc218ee00][SLP] gv_d vd3
> 623 c250f3f8 0 0 0 0000204 [SLPQ - 0xc21bab00][SLP] gv_d vd0
> 622 c250e7f0 0 0 0 0000204 [SLPQ - 0xc2513600][SLP] gv_d vd1
> 621 c212ade4 0 1 621 0004002 [SLPQ ttyin 0xc1fcfc10][SLP] getty
> 620 c218c3f8 0 1 620 0004002 [SLPQ ttyin 0xc1fd7410][SLP] getty
> 619 c212abe8 0 1 619 0004002 [SLPQ ttyin 0xc1fa3c10][SLP] getty
> 618 c250f1fc 0 1 618 0004002 [SLPQ ttyin 0xc1fd7010][SLP] getty
> 617 c212a9ec 0 1 617 0004002 [SLPQ ttyin 0xc1fd6810][SLP] getty
> 612 c218c7f0 0 1 612 0000000 [SLPQ select 0xc0799c04][SLP] inetd
> 572 c250e1fc 0 1 571 0000000 [SLPQ select 0xc0799c04][SLP] snmpd
> 564 c250ebe8 0 1 563 0000000 [SLPQ nanslp 0xc07930ac][SLP] smartd
> 560 c21899ec 0 559 560 0004002 [SLPQ ttyin 0xc20f0010][SLP] csh
> 559 c250f000 1001 546 559 0004102 [SLPQ wait 0xc250f000][SLP] su
> 546 c2189de4 1001 545 546 0004002 [SLPQ pause 0xc2189e18][SLP] csh
> 545 c212b9ec 1001 542 542 0000100 [SLPQ select 0xc0799c04][SLP] sshd
> 542 c1fdbde4 0 470 542 0004100 [SLPQ sbwait 0xc2490718][SLP] sshd
> 541 c212b3f8 0 533 533 0000101 [SLPQ pause 0xc212b42c][SLP] smbd
> 533 c21893f8 0 1 533 0000101 [SLPQ select 0xc0799c04][SLP] smbd
> 529 c21891fc 0 1 529 0000001 [SLPQ select 0xc0799c04][SLP] nmbd
> 509 c21897f0 65534 1 509 0000100 [SLPQ select 0xc0799c04][SLP]
> identd
> 496 c218c1fc 0 1 496 0000000 [SLPQ nanslp 0xc07930ac][SLP] cron
> 480 c212bde4 25 1 480 0000100 [SLPQ pause 0xc212be18][SLP]
> sendmail
> 476 c212a1fc 0 1 476 0000100 [SLPQ select 0xc0799c04][SLP]
> sendmail
> 470 c212a5f4 0 1 470 0000100 [SLPQ select 0xc0799c04][SLP] sshd
> 451 c21895f4 0 1 451 0000000 [SLPQ select 0xc0799c04][SLP] ntpd
> 344 c218c000 0 1 344 0000000 [SLPQ select 0xc0799c04][SLP]
> syslogd
> 315 c212a7f0 0 1 315 0000000 [SLPQ select 0xc0799c04][SLP] devd
> 171 c212a3f8 0 1 171 0000000 [SLPQ pause 0xc212a42c][SLP]
> adjkerntz
> 56 c212b7f0 0 0 0 0000204 [SLPQ - 0xe46a4d0c][SLP] schedcpu
> 55 c1ecd3f8 0 0 0 0000204 [SLPQ - 0xc079d52c][SLP] nfsiod 3
> 54 c1ecd5f4 0 0 0 0000204 [SLPQ - 0xc079d528][SLP] nfsiod 2
> 53 c1ecd7f0 0 0 0 0000204 [SLPQ - 0xc079d524][SLP] nfsiod 1
> 52 c1ecd9ec 0 0 0 0000204 [SLPQ - 0xc079d520][SLP] nfsiod 0
> 51 c1ecdbe8 0 0 0 0000204 [SLPQ vlruwt 0xc1ecdbe8][SLP] vnlru
> 50 c1ecdde4 0 0 0 0000204 [SLPQ syncer 0xc0792e0c][SLP] syncer
> 49 c1fdb000 0 0 0 0000204 [SLPQ psleep 0xc079a170][SLP]
> bufdaemon
> 48 c1fdb1fc 0 0 0 0000204 [SLPQ pollid 0xc0792464][SLP]
> idlepoll
> 47 c1fdb3f8 0 0 0 000020c [SLPQ pgzero 0xc07a3c24][SLP]
> pagezero
> 46 c1fdb5f4 0 0 0 0000204 [SLPQ psleep 0xc07a3774][SLP]
> vmdaemon
> 45 c1fdb7f0 0 0 0 0000204 [SLPQ psleep 0xc07a3730][SLP]
> pagedaemon
> 9 c1fdb9ec 0 0 0 0000204 [SLPQ - 0xc1fb843c][SLP] fdc0
> 44 c1fdbbe8 0 0 0 0000204 [IWAIT] swi0: sio
> 8 c1ec0be8 0 0 0 0000204 [SLPQ idle 0xc1f6dc74][SLP]
> ciss_notify0
> 7 c1ec0de4 0 0 0 0000204 [SLPQ actask 0xc08a0f2c][SLP]
> acpi_task0
> 43 c1ecb000 0 0 0 0000204 [IWAIT] swi5:+
> 42 c1ecb1fc 0 0 0 0000204 [IWAIT] swi6: acpitaskq
> 6 c1ecb3f8 0 0 0 0000204 [SLPQ - 0xc1f3c080][SLP] thread
> taskq
> 41 c1ecb5f4 0 0 0 0000204 [IWAIT] swi6:+
> 40 c1ecb7f0 0 0 0 0000204 [CPU 0] swi6: task queue
> 5 c1ecb9ec 0 0 0 0000204 [SLPQ - 0xc1f3c1c0][SLP] kqueue
> taskq
> 39 c1ecbbe8 0 0 0 0000204 [IWAIT] swi2: cambio
> 38 c1ecbde4 0 0 0 0000204 [SLPQ - 0xc078bdc0][SLP] yarrow
> 4 c1ecd000 0 0 0 0000204 [SLPQ - 0xc0790228][SLP] g_down
> 3 c1ecd1fc 0 0 0 0000204 [SLPQ - 0xc0790224][SLP] g_up
> 2 c1eb05f4 0 0 0 0000204 [SLPQ - 0xc079021c][SLP] g_event
> 37 c1eb07f0 0 0 0 0000204 [RUNQ] swi1: net
> 36 c1eb09ec 0 0 0 0000204 [IWAIT] swi3: vm
> 35 c1eb0be8 0 0 0 000020c [RUNQ] swi4: clock sio
> 34 c1eb0de4 0 0 0 0000204 [IWAIT] irq23:
> 33 c1ec0000 0 0 0 0000204 [IWAIT] irq22: em1
> 32 c1ec01fc 0 0 0 0000204 [IWAIT] irq21: em0
> 31 c1ec03f8 0 0 0 0000204 [IWAIT] irq20: ciss0
> 30 c1ec05f4 0 0 0 0000204 [IWAIT] irq19: atapci3+
> 29 c1ec07f0 0 0 0 0000204 [IWAIT] irq18:
> 28 c1ec09ec 0 0 0 0000204 [LOCK taskqueue c1e01140] irq17:
> atapci1+
> 27 c1e0b1fc 0 0 0 0000204 [IWAIT] irq16:
> 26 c1e0b3f8 0 0 0 0000204 [IWAIT] irq15: ata1
> 25 c1e0b5f4 0 0 0 0000204 [IWAIT] irq14: ata0
> 24 c1e0b7f0 0 0 0 0000204 [IWAIT] irq13:
> 23 c1e0b9ec 0 0 0 0000204 [IWAIT] irq12:
> 22 c1e0bbe8 0 0 0 0000204 [IWAIT] irq11:
> 21 c1e0bde4 0 0 0 0000204 [IWAIT] irq10:
> 20 c1eb0000 0 0 0 0000204 [IWAIT] irq9: acpi0
> 19 c1eb01fc 0 0 0 0000204 [IWAIT] irq8:
> 18 c1eb03f8 0 0 0 0000204 [IWAIT] irq7:
> 17 c1e06000 0 0 0 0000204 [IWAIT] irq6: fdc0
> 16 c1e061fc 0 0 0 0000204 [IWAIT] irq5:
> 15 c1e063f8 0 0 0 0000204 [IWAIT] irq4: sio0
> 14 c1e065f4 0 0 0 0000204 [IWAIT] irq3:
> 13 c1e067f0 0 0 0 0000204 [IWAIT] irq0:
> 12 c1e069ec 0 0 0 0000204 [IWAIT] irq1: atkbd0
> 11 c1e06be8 0 0 0 000020c [Can run] idle: cpu0
> 10 c1e06de4 0 0 0 000020c [Can run] idle: cpu1
> 1 c1e0b000 0 0 1 0004200 [SLPQ wait 0xc1e0b000][SLP] init
> 0 c0790320 0 0 0 0000200 [SLPQ sched 0xc0790320][SLP] swapper
>
>
>
> And here's part of the dmesg:
> /boot/kernel/kernel text=0x3528bc data=0x36388+0x33c38
> syms=[0x4+0x42940+0x4+0x537ec]
> /boot/kernel/acpi.ko text=0x49fa0 data=0x2124+0x110c
> syms=[0x4+0x7730+0x4+0x9ec3]
> KDB: debugger backends: ddb
> KDB: current backend: ddb
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 6.0-CURRENT #0: Tue Apr 12 10:23:40 CEST 2005
> daniel at xxx:/usr/obj/usr/src/sys/XXX
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: AMD Athlon(tm) MP 2600+ (2000.08-MHz 686-class CPU)
> Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0
>
> Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
> CMOV,PAT,PSE36,MMX,FXSR,SSE>
> AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
> real memory = 804782080 (767 MB)
> avail memory = 778342400 (742 MB)
> ACPI APIC Table: <PTLTD APIC >
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> cpu0 (BSP): APIC ID: 1
> cpu1 (AP): APIC ID: 0
> MADT: Forcing active-low polarity and level trigger for SCI
> ioapic0 <Version 1.1> irqs 0-23 on motherboard
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <PTLTD RSDT> on motherboard
> acpi0: Power Button (fixed)
> acpi0: Sleep Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x8000-0x807f,0x8080-0x80ff
> iomem 0xd8000-0xdbfff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> agp0: <AMD 762 host to AGP bridge> port 0x1490-0x1493 mem
> 0xec000000-0xedffffff,0xea100000-0xea100fff at device 0.0 on pci0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pci1: <display, VGA> at device 5.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 7.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <AMD 768 UDMA100 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 7.1 on pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> pci0: <bridge> at device 7.3 (no driver attached)
> ciss0: <Compaq Smart Array 5300> port 0x1000-0x10ff mem
> 0xe8100000-0xe813ffff,0xe8000000-0xe80fffff irq 20 at device 8.0 on pci0
> ciss0: [GIANT-LOCKED]
> em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
> 0x1400-0x143f mem 0xe81c0000-0xe81dffff,0xe8140000-0xe817ffff irq 21 at
> device 9.0 on pci0
> em0: Ethernet address: 00:04:23:ac:20:8a
> em0: Speed:N/A Duplex:N/A
> em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
> 0x1440-0x147f mem 0xe81e0000-0xe81fffff,0xe8180000-0xe81bffff irq 22 at
> device 9.1 on pci0
> em1: Ethernet address: 00:04:23:ac:20:8b
> em1: Speed:N/A Duplex:N/A
> pcib2: <ACPI PCI-PCI bridge> at device 16.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> atapci1: <HighPoint HPT374 (channel 0+1) UDMA133 controller> port
> 0x3010-0x3017,0x3004-0x3007,0x3008-0x300f,0x3000-0x3003,0x2000-0x20ff irq 17
> at device 5.0 on pci2
> ata2: <ATA channel 0> on atapci1
> ata3: <ATA channel 1> on atapci1
> atapci2: <HighPoint HPT374 (channel 2+3) UDMA133 controller> port
> 0x3028-0x302f,0x301c-0x301f,0x3020-0x3027,0x3018-0x301b,0x2400-0x24ff irq 17
> at device 5.1 on pci2
> ata4: <ATA channel 0> on atapci2
> ata5: <ATA channel 1> on atapci2
> atapci3: <HighPoint HPT374 (channel 0+1) UDMA133 controller> port
> 0x3040-0x3047,0x3034-0x3037,0x3038-0x303f,0x3030-0x3033,0x2800-0x28ff irq 19
> at device 7.0 on pci2
> ata6: <ATA channel 0> on atapci3
> ata7: <ATA channel 1> on atapci3
> atapci4: <HighPoint HPT374 (channel 2+3) UDMA133 controller> port
> 0x3058-0x305f,0x304c-0x304f,0x3050-0x3057,0x3048-0x304b,0x2c00-0x2cff irq 19
> at device 7.1 on pci2
> ata8: <ATA channel 0> on atapci4
> ata9: <ATA channel 1> on atapci4
> pci_link0: <ACPI PCI Link LNKA> irq 5 on acpi0
> pci_link1: <ACPI PCI Link LNKB> irq 3 on acpi0
> pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
> pci_link3: <ACPI PCI Link LNKD> irq 10 on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
> acpi0
> sio0: type 16550A, console
> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
> fdc0: [FAST]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> pmtimer0 on isa0
> orm0: <ISA Option ROMs> at iomem
> 0xc0000-0xcafff,0xcb000-0xcefff,0xe0000-0xe3fff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x100>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> Timecounters tick every 1.000 msec
> ipfw2 initialized, divert loadable, rule-based forwarding disabled, default
> to accept, logging unlimited
> ad0: 117800MB <IC35L120AVV207 0 V24OA66A> at ata0-master UDMA100
> ad1: 117800MB <HDS722512VLAT20 V33OA60A> at ata0-slave UDMA100
> ad2: 117800MB <IC35L120AVV207 0 V24OA66A> at ata1-master UDMA100
> ad3: 117800MB <IC35L120AVV207 0 V24OA66A> at ata1-slave UDMA100
> ad4: 238475MB <WDC WD2500JB-00FUA0 15.05R15> at ata2-master UDMA100
> ad5: 238475MB <WDC WD2500JB-00FUA0 15.05R15> at ata2-slave UDMA100
> ad6: 239372MB <Maxtor 4A250J0 RAMB1TU0> at ata3-master UDMA133
> ad7: 239372MB <Maxtor 5A250J0 RAMB1TV0> at ata3-slave UDMA133
> ad8: 194481MB <Maxtor 6Y200P0 YAR41BW0> at ata4-master UDMA133
> ad9: 194481MB <Maxtor 6Y200P0 YAR41VW0> at ata4-slave UDMA133
> ad10: 239372MB <Maxtor 6Y250P0 YAR41BW0> at ata5-master UDMA133
> ad12: 114473MB <Seagate ST3120022A 3.06> at ata6-master UDMA100
> ad13: 114473MB <Seagate ST3120022A 3.06> at ata6-slave UDMA100
> ad14: 117246MB <Maxtor 6Y120L0 YAR41BW0> at ata7-master UDMA133
> ad15: 117246MB <Maxtor 6Y120L0 YAR41BW0> at ata7-slave UDMA133
> ad16: 114473MB <WDC WD1200JB-00DUA3 75.13B75> at ata8-master UDMA100
> ad17: 117800MB <IC35L120AVV207 1 V24OA66A> at ata8-slave UDMA100
> ad18: 194481MB <Maxtor 6Y200P0 YAR41BW0> at ata9-master UDMA133
> ad19: 239372MB <Maxtor 7Y250P0 YAR41BW0> at ata9-slave UDMA133
> da0 at ciss0 bus 0 target 0 lun 0
> da0: <COMPAQ RAID 5 VOLUME OK> Fixed Direct Access SCSI-0 device
> da0: 135.168MB/s transfers
> da0: 105008MB (215056800 512 byte sectors: 255H 32S/T 26355C)
> da1 at ciss0 bus 0 target 1 lun 0
> da1: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-0 device
> da1: 135.168MB/s transfers
> da1: 486240MB (995821155 512 byte sectors: 255H 63S/T 61987C)
> ATA PseudoRAID loaded
> ar0: 476950MB <HighPoint v2 RocketRAID RAID0 array> status: READY
> ar0: disk0 READY using ad4 at ata2-master
> ar0: disk1 READY using ad5 at ata2-slave
> ar1: 478744MB <HighPoint v2 RocketRAID RAID0 array> status: READY
> ar1: disk0 READY using ad6 at ata3-master
> ar1: disk1 READY using ad7 at ata3-slave
> ar2: 583442MB <HighPoint v2 RocketRAID RAID0 array> status: READY
> ar2: disk0 READY using ad8 at ata4-master
> ar2: disk1 READY using ad9 at ata4-slave
> ar2: disk2 READY using ad18 at ata9-master
> ar3: 478744MB <HighPoint v2 RocketRAID RAID0 array> status: READY
> ar3: disk0 READY using ad19 at ata9-slave
> ar3: disk1 READY using ad10 at ata5-master
> ar4: 343420MB <HighPoint v2 RocketRAID RAID0 array> status: READY
> ar4: disk0 READY using ad12 at ata6-master
> ar4: disk1 READY using ad13 at ata6-slave
> ar4: disk2 READY using ad16 at ata8-master
> ar5: 351740MB <HighPoint v2 RocketRAID RAID0 array> status: READY
> ar5: disk0 READY using ad14 at ata7-master
> ar5: disk1 READY using ad15 at ata7-slave
> ar5: disk2 READY using ad17 at ata8-slave
> SMP: AP CPU #1 Launched!
> Trying to mount root from ufs:/dev/da0s1a
> Pre-seeding PRNG: kickstart.
> Loading configuration files.
> kernel dumps on /dev/da0s1b
> Entropy harvesting: point_to_point kickstart.
> swapon: adding /dev/da0s1b as swap device
> Starting file system checks:
> /dev/da0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
> /dev/da0s1a: clean, 124444 free (1100 frags, 15418 blocks, 0.4%
> fragmentation)
> /dev/da0s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
> /dev/da0s1e: clean, 253807 free (31 frags, 31722 blocks, 0.0% fragmentation)
> /dev/da0s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS
> /dev/da0s1f: clean, 3082494 free (29310 frags, 381648 blocks, 0.6%
> fragmentation)
> /dev/da0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
> /dev/da0s1d: clean, 207823 free (975 frags, 25856 blocks, 0.4%
> fragmentation)
> /dev/da0s1h: FILE SYSTEM CLEAN; SKIPPING CHECKS
> /dev/da0s1h: clean, 31567485 free (557 frags, 3945866 blocks, 0.0%
> fragmentation)
> Setting hostname: xxx.
> net.inet.tcp.sendspace: 32768 -> 2097152
> net.inet.tcp.recvspace: 65536 -> 2097152
> kern.ipc.maxsockbuf: 262144 -> 16777216
> kern.ipc.somaxconn: 128 -> 256
> net.inet.ip.intr_queue_maxlen: 50 -> 128
> kern.polling.enable: 0 -> 1
> kern.polling.burst_max: 150 -> 300
> kern.polling.each_burst: 5 -> 50
> kern.polling.poll_in_trap: 0 -> 1
> kern.polling.user_frac: 50 -> 33
> vfs.hirunningspace: 1048576 -> 8388608
> ...
>
>
> _______________________________________________
> freebsd-current at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"
>
--
Doug White | FreeBSD: The Power to Serve
dwhite at gumbysoft.com | www.FreeBSD.org
More information about the freebsd-current
mailing list