SiS not working with atamkIII

[Søren Schmidt]

Divacky Roman wrote:
> additinoal info (hand rewritten from verbose dmesg):
> atamkIII:
> ata0: reset tp1 mask=03 ostat=50 ostat1=50
> ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90
> ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90
> ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
> ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
> ata0: reset tp2 stat=50 stat1=00 devices=0x9 (ATAPI_SLAVE,ATA_MASTER>
> 
> 
> old ata:
> atapci0: <SiS 735 UDMA100 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0
> xff00-0xff0f at device 2.5 on pci0
> atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xff00
> ata0: channel #0 on atapci0
> atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
> atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
> ata0: reset tp1 mask=03 ostat0=50 ostat1=50
> ata0-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90
> ata0-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90
> ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
> ata0-slave:  stat=0x00 err=0x01 lsb=0x14 msb=0xeb
> ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER>

Hmm, from what I can see above both old and new find the exact same 
devices: ATAPI_SLAVE,ATA_MASTER.

What is it you miss ?

-- 

-Søren