pri-slave not detected/cable error [Was: Re: HEADSUP: ATAmkIII has been committed]

[Søren Schmidt]

Emanuel Strobl wrote:
> Am Mittwoch, 30. März 2005 14:07 schrieb Søren Schmidt:
> 
>>As pr subject make world is needed to get things in sync again.
>>
>>Let me know is there are problems / success stories..
> 
> 
> Hi Søren,
> 
> -current doesn't detect my primary slave drive while RELENG_5 had no problem.
> When I connect the slave drive to the secondary port everything is fine.
> Also, if the slave drive is connected, ata reports that there's no 80pin 
> cable, which is wrong.

Hmm, and you are sure the cable is the right way around ?

Anyhow the output from a verbose boot would be most helpfull, just mail 
it directly to me, thanks!

-- 

-Søren