Cannot connect DSL with CURRENT ok with STABLE

[Julian Elischer]

output from tcpdump -i ed0
would be good for both successful and failing setups.

Michael C. Shultz wrote:
> Hello,
> 
> I have a machine that dual boots in 4.10 STABLE or 6.0 CURENT.  With identical
> settings I cannot connect to Verizon DSL in CURRENT.  Any advice? Thankyou.
> Here are my sttings:
> 
> ppp.conf:
> 
> default:
>  set log Phase tun command
>  set ifaddr 10.0.0.1/0 10.0.0.2/0
>  enable dns
> verizon:
>  set device PPPoE:ed0
>  set dial
>  set login
>  add default HISADDR
> 
> rc.conf <portion>
> 
> pppoed_enable="YES"  # Run the PPP over Ethernet daemon.
> pppoed_provider="verizon"  # Provider and ppp(8) config file entry.
> pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
> pppoed_interface="ed0"  # The interface that pppoed runs on.
> 
> -Mike
> 
> _______________________________________________
> freebsd-current at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"