PCMCIA problems w/ 5.3 BETA 4
Marc Ramirez
marc.ramirez at bluecirclesoft.com
Mon Sep 20 22:03:56 PDT 2004
On Sunday 19 September 2004 02:05 pm, you wrote:
> Can you post the pciconf -l as well as a 4.10 dmesg if you have one?
I completely missed the OLDCARD config. It seems to work with no problems.
Here are the two files from 4.10. If you want to test any code, feel free to
e-mail me.
Thanks for your time!
Marc.
--
Marc Ramirez
Blue Circle Software Corporation
513-688-1070 (main)
513-382-1270 (direct)
http://www.bluecirclesoft.com
http://www.mrami.com (personal)
-------------- next part --------------
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.10-RELEASE #0: Tue May 25 22:52:21 GMT 2004
root at perseus.cse.buffalo.edu:/usr/obj/usr/src/sys/BOOTMFS
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1594836428 Hz
CPU: Mobile Intel(R) Celeron(R) CPU 1.60GHz (1594.84-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 268238848 (261952K bytes)
config> intro
\^[[m\^[[H\^[[J\^[[3;26H\^[[m\^[[1m\^[[m\^[[6;11H\^[[m\^[[7m\^[[m\^[[7;11H\^[[m\^[[8;11H\^[[m\^[[11;3H\^[[m\^[[12;3H\^[[m\^[[13;3H\^[[m\^[[15;3H\^[[m\^[[16;3H\^[[m\^[[18;3H\^[[m\^[[19;3H\^[[m\^[[21;3H\^[[m\^[[7m\^[[m\^[[22;3H\^[[m\^[[1;1H\^[[6;11H\^[[m\^[[7;11H\^[[m\^[[7m\^[[m\^[[8;11H\^[[m\^[[1;1H\^[[6;11H\^[[m\^[[7m\^[[m\^[[7;11H\^[[m\^[[8;11H\^[[m\^[[1;1H\^[[m\^[[H\^[[Javail memory = 252792832 (246868K bytes)
Preloaded elf kernel "kernel" at 0xc0829000.
Preloaded mfs_root "/mfsroot" at 0xc0829084.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
md0: Preloaded image </mfsroot> 4423680 bytes at 0xc03ef3d4
md1: Malloc disk
Using $PIR table, 8 entries at 0xc00f01a0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82845 Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82845 PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia model 0175 graphics accelerator> at 0.0 irq 10
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xefe0-0xefff irq 11 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0xef80-0xef9f irq 11 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0xdf40-0xdf7f mem 0xfceff000-0xfcefffff irq 11 at device 8.0 on pci2
fxp0: Ethernet address 00:08:0d:05:70:0b
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0xcfa0-0xcfaf,0xcfe4-0xcfe7,0xcfe8-0xcfef,0xcff4-0xcff7,0xcff8-0xcfff irq 11 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x2485) at 31.5 irq 11
pci0: <unknown card> (vendor=0x8086, dev=0x2486) at 31.6 irq 11
orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xe0000-0xeffff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <Intel i82365SL-A/B> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pccard1: <PC Card 16-bit bus (classic)> on pcic0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
plip0: <PLIP network interface> on ppbus0
pccard: card inserted, slot 1
ad0: 19077MB <TOSHIBA MK2018GAS> [38760/16/63] at ata0-master UDMA100
acd0: CD-RW <DW-224E> at ata1-master PIO4
Mounting root from ufs:/dev/md0c
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
sio1: configured irq 3 not in bitmap of probed irqs 0
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks... 1
done
Uptime: 12m9s
Rebooting...
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.10-RELEASE #0: Tue May 25 22:52:21 GMT 2004
root at perseus.cse.buffalo.edu:/usr/obj/usr/src/sys/BOOTMFS
Calibrating clock(s) ... TSC clock: 1594799912 Hz, i8254 clock: 1193162 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 1594835720 Hz
CPU: Mobile Intel(R) Celeron(R) CPU 1.60GHz (1594.84-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 268238848 (261952K bytes)
Physical memory chunk(s):
0x000001000 - 0x00009efff, 647168 bytes (158 pages)
0x000850000 - 0x00ffc7fff, 259489792 bytes (63352 pages)
config> intro
\^[[m\^[[H\^[[J\^[[3;26H\^[[m\^[[1m\^[[m\^[[6;11H\^[[m\^[[7m\^[[m\^[[7;11H\^[[m\^[[8;11H\^[[m\^[[11;3H\^[[m\^[[12;3H\^[[m\^[[13;3H\^[[m\^[[15;3H\^[[m\^[[16;3H\^[[m\^[[18;3H\^[[m\^[[19;3H\^[[m\^[[21;3H\^[[m\^[[7m\^[[m\^[[22;3H\^[[m\^[[1;1H\^[[m\^[[H\^[[Javail memory = 252792832 (246868K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f0240
bios32: Entry = 0xfc04c (c00fc04c) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xd4df
pnpbios: Found PnP BIOS data at 0xc00f0440
pnpbios: Entry = f0000:9138 Rev = 1.0
pnpbios: Event flag at 510
pnpbios: OEM ID 1938f351
Other BIOS signatures found:
ACPI: 000f0180
Preloaded elf kernel "kernel" at 0xc0829000.
Preloaded mfs_root "/mfsroot" at 0xc0829090.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
md0: Preloaded image </mfsroot> 4423680 bytes at 0xc03ef3d4
Creating DISK md0
Creating DISK md1
md1: Malloc disk
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=1a308086)
Using $PIR table, 8 entries at 0xc00f01a0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82845 Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x1a30, revid=0x05
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base f0000000, size 27
found-> vendor=0x8086, dev=0x1a31, revid=0x05
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x8086, dev=0x2482, revid=0x02
class=0c-03-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[20]: type 1, range 32, base 0000efe0, size 5
found-> vendor=0x8086, dev=0x2484, revid=0x02
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=11
map[20]: type 1, range 32, base 0000ef80, size 5
found-> vendor=0x8086, dev=0x2448, revid=0x42
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=5 secondarybus=2
found-> vendor=0x8086, dev=0x248c, revid=0x02
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x248a, revid=0x02
class=01-01-8a, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 3, range 32, base 0000cff8, size 3
map[14]: type 1, range 32, base 0000cff4, size 2
map[18]: type 3, range 32, base 0000cfe8, size 3
map[1c]: type 1, range 32, base 0000cfe4, size 2
map[20]: type 1, range 32, base 0000cfa0, size 4
found-> vendor=0x8086, dev=0x2485, revid=0x02
class=04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=11
map[10]: type 1, range 32, base 0000ce00, size 8
map[14]: type 1, range 32, base 0000cdc0, size 6
found-> vendor=0x8086, dev=0x2486, revid=0x02
class=07-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=11
map[10]: type 1, range 32, base 0000ca00, size 8
map[14]: type 1, range 32, base 0000c980, size 7
pci0: <PCI bus> on pcib0
pcib1: <Intel 82845 PCI-PCI (AGP) bridge> at device 1.0 on pci0
found-> vendor=0x10de, dev=0x0175, revid=0xa3
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base fd000000, size 24
map[14]: type 1, range 32, base ec000000, size 26
map[18]: type 1, range 32, base ebf80000, size 19
pci1: <PCI bus> on pcib1
pci1: <NVidia model 0175 graphics accelerator> (vendor=0x10de, dev=0x0175) at 0.0 irq 10
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xefe0-0xefff irq 11 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0xef80-0xef9f irq 11 at device 29.1 on pci0
using shared irq11.
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
found-> vendor=0x8086, dev=0x1031, revid=0x42
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base fceff000, size 12
map[14]: type 1, range 32, base 0000df40, size 6
pci2: <PCI bus> on pcib2
fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0xdf40-0xdf7f mem 0xfceff000-0xfcefffff irq 11 at device 8.0 on pci2
fxp0: using memory space register mapping
fxp0: Ethernet address 00:08:0d:05:70:0b
fxp0: PCI IDs: 8086 1031 1179 0001 0042
fxp0: Dynamic Standby mode is disabled
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0xcfa0-0xcfaf,0xcfe4-0xcfe7,0xcfe8-0xcfef,0xcff4-0xcff7,0xcff8-0xcfff irq 11 at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xcfa0
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xcfa8
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 00 00
ata1: mask=03 stat0=00 stat1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x2485) at 31.5 irq 11
pci0: <unknown card> (vendor=0x8086, dev=0x2486) at 31.6 irq 11
ex_isa_identify()
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xe0000-0xeffff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
adv0 failed to probe on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
08 08 08 0f 00 00 00 00 08 08 08 ff 00 00 00 00
00 00 00 ff 08 08 08 08 08 08 08 0f 08 08 08 08
00 00 00 ff 00 00 00 00 08 08 08 ff 08 08 08 08
08 08 0f 08 0f 08 08 08 14 14 14 17 14 14 14 14
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic0: <Intel i82365SL-A/B> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pccard1: <PC Card 16-bit bus (classic)> on pcic0
pcic1: not probed (disabled)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: irq maps: 0x1 0x1 0x1 0x1
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: sl0 attached
ad0: success setting UDMA5 on Intel chip
Creating DISK ad0
pcic0: Power: Vcc=0 Vpp=0
pcic0: Power applied
Power complete.
pcic0: Power: Vcc=-1 Vpp=-1
pcic0: Couldn't autodetect voltage, assuming 5.0V
pcic0: Power applied
pcic0: Output enabled
pcic0: Settling complete
Power complete.
pccard: card inserted, slot 1
pcic0: reset 1 int is 0 stat is ff
ar: FreeBSD check1 failed
ad0: <TOSHIBA MK2018GAS/Q2.03 E> ATA-5 disk at ata0-master
ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <DW-224E/7.0A> CD-RW drive at ata1 as master
acd0: read 4134KB/s (34515KB/s) write 1722KB/s (1722KB/s), 1658KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, DVD-RAM, packet
acd0: Writes: CD-R, CD-RW, test write
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-RW 120mm data disc
Mounting root from ufs:/dev/md0c
start_init: trying /sbin/init
start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
start_init: trying /stand/sysinstall
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
aha0: status reg test failed ff
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x105 0x105 0x105 0x105
sio1: probe failed test(s): 0 1 2 4 6 7 9
pcic0: reset 2 int is 60 stat is cd
pcic0: reset 3 int is 60 stat is ed
pccard1: Assigning wi0: io 0x240-0x27f irq 3 flags 0x0
pcic: I/O win 0 flags 15 240-27f
pcic: I/O win 0 flags 5 240-27f
wi0 at port 0x240-0x27f irq 3 slot 1 on pccard1
pcic: I/O win 0 flags 15 240-27f
wi0: 802.11 address: 00:40:05:de:d1:54
wi0: using RF:PRISM2 MAC:HFA3841 CARD:HWB3163-SST-flash
wi0: Intersil Firmware: Primary 0.03.00, Station 0.07.06
wi0: wi_has_wep = 1
bpf: wi0 attached
ad0s1: type 0x7, start 63, end = 16787924, size 16787862
ad0s1: C/H/S end 1023/10/63 (1031876) != end 16787924: invalid
ad0s2: type 0xa5, start 16787925, end = 39070079, size 22282155 : OK
ad0s1: type 0x7, start 63, end = 16787924, size 16787862
ad0s1: C/H/S end 1023/10/63 (1031876) != end 16787924: invalid
ad0s2: type 0xa5, start 16787925, end = 39070079, size 22282155 : OK
ad0s1: type 0x7, start 63, end = 16787924, size 16787862
ad0s1: C/H/S end 1023/10/63 (1031876) != end 16787924: invalid
ad0s2: type 0xa5, start 16787925, end = 39070079, size 22282155 : OK
ad0s1: type 0x7, start 63, end = 16787924, size 16787862
ad0s1: C/H/S end 1023/10/63 (1031876) != end 16787924: invalid
ad0s2: type 0xa5, start 16787925, end = 39070079, size 22282155 : OK
ad0s1: type 0x7, start 63, end = 16787924, size 16787862
ad0s1: C/H/S end 1023/10/63 (1031876) != end 16787924: invalid
ad0s2: type 0xa5, start 16787925, end = 39070079, size 22282155 : OK
ad0s1: type 0x7, start 63, end = 16787924, size 16787862
ad0s1: C/H/S end 1023/10/63 (1031876) != end 16787924: invalid
ad0s2: type 0xa5, start 16787925, end = 39070079, size 22282155 : OK
ad0s1: type 0x7, start 63, end = 16787924, size 16787862
ad0s1: C/H/S end 1023/10/63 (1031876) != end 16787924: invalid
ad0s2: type 0xa5, start 16787925, end = 39070079, size 22282155 : OK
ad0s1: type 0x7, start 63, end = 16787924, size 16787862
ad0s1: C/H/S end 1023/10/63 (1031876) != end 16787924: invalid
ad0s2: type 0xa5, start 16787925, end = 39070079, size 22282155 : OK
ad0s1: type 0x7, start 63, end = 16787924, size 16787862
ad0s1: C/H/S end 1023/10/63 (1031876) != end 16787924: invalid
ad0s2: type 0xa5, start 16787925, end = 39070079, size 22282155 : OK
ad0s1: type 0x7, start 63, end = 16787924, size 16787862
ad0s1: C/H/S end 1023/10/63 (1031876) != end 16787924: invalid
ad0s2: type 0xa5, start 16787925, end = 39070079, size 22282155 : OK
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-current/attachments/20040921/b65231fa/attachment.bin
More information about the freebsd-current
mailing list