ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=207594611

Tue Sep 14 14:54:13 PDT 2004

Forgot to mention I'm running -CURRENT as of a couple hours ago and I am now
seeing the rcorder core dump also as mentioned in another thread.

-----Original Message-----
From: owner-freebsd-current at freebsd.org
[mailto:owner-freebsd-current at freebsd.org] On Behalf Of Grover Lines
Sent: Tuesday, September 14, 2004 2:46 PM
To: freebsd-current at freebsd.org
Subject: RE: ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=207594611

I'm getting these messages also and I'm not using mpsafenet=0.
This is the only error I'm getting also. I'm running on a p4 with a via
P4xbsa board. I just started getting these errors about the same time they
changed the default scheduler to 4BSD. I rebuild daily so .... Anyway I
still get these messages using sched_ule for a scheduler so I don't know if
that has anything to do with it.

--
Grover Lines

-----Original Message-----
From: owner-freebsd-current at freebsd.org
[mailto:owner-freebsd-current at freebsd.org] On Behalf Of FUJITA Kazutoshi
Sent: Tuesday, September 14, 2004 10:14 AM
To: freebsd-current at freebsd.org
Subject: ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=207594611

Hi,

My 6.0-CURRENT box says, such as

ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=207594611
ad0: WARNING - READ_DMA no interrupt but good status

I replaced the ad0 with brand-new HDD, but I still got same messages.

The box has 3 HDDs(ad0,ad1,ad3) and DVD(acd0) drive, but the messages
comes only from ad0.

What is happening?
Cable problem or ATA controller problem?

Regards,

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #4: Sun Sep 12 08:19:34 JST 2004
    fujita at faithia:/usr/obj/usr/src/sys/FAITHIA
WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant
WARNING: MPSAFE network stack disabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz (2000.08-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4

Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV
,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory  = 536805376 (511 MB)
avail memory = 515616768 (491 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIINT SiS645XX> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SiS 650 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device 0.0
on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
drm0: <ATI Radeon QW RV200 7500> port 0x9800-0x98ff mem
0xdfdf0000-0xdfdfffff,0xd0000000-0xd7ffffff at device 0.0 on pci1
info: [drm] AGP at 0xe0000000 64MB
info: [drm] Initialized radeon 1.11.0 20020828 on minor 0
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xdfffe000-0xdfffefff irq 11 at device
2.2 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xdffff000-0xdfffffff irq 5 at device
2.3 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
atapci0: <SiS 961 UDMA100 controller> port
0xff00-0xff0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 2.5 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pcm0: <SiS 7012> port 0xd800-0xd87f,0xdc00-0xdcff irq 11 at device 2.7 on
pci0
pcm0: [GIANT-LOCKED]
pcm0: <C-Media Electronics CMI9738 AC97 Codec>
sis0: <SiS 900 10/100BaseTX> port 0xd400-0xd4ff mem 0xdfff9000-0xdfff9fff
irq 5 at device 3.0 on pci0
miibus0: <MII bus> on sis0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:07:95:c0:de:e2
sis0: [GIANT-LOCKED]
fwohci0: <VIA Fire II (VT6306)> port 0xd000-0xd07f mem 0xdfff8800-0xdfff8fff
irq 5 at device 9.0 on pci0
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:40:26:01:06:04:21:f1
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:40:26:04:21:f1
fwe0: Ethernet address: 02:40:26:04:21:f1
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:40:26:01:06:04:21:f1 @ 0xfffe00000000, S400,
maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
0xcc00-0xcc3f mem 0xdff80000-0xdff9ffff,0xdffa0000-0xdffbffff irq 11 at
device 10.0 on pci0
em0: [GIANT-LOCKED]
em0: Ethernet address: 00:07:e9:00:f1:4d
em0:  Speed:N/A  Duplex:N/A
fxp0: <Intel 82550 Pro/100 Ethernet> port 0xc800-0xc83f mem
0xdff40000-0xdff5ffff,0xdfffd000-0xdfffdfff irq 5 at device 11.0 on pci0
miibus1: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus1
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:02:b3:a6:83:2d
fxp0: [GIANT-LOCKED]
ohci2: <NEC uPD 9210 USB controller> mem 0xdfffa000-0xdfffafff irq 11 at
device 12.0 on pci0
ohci2: [GIANT-LOCKED]
usb2: OHCI version 1.0
usb2: <NEC uPD 9210 USB controller> on ohci2
usb2: USB revision 1.0
uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
ohci3: <NEC uPD 9210 USB controller> mem 0xdfffb000-0xdfffbfff irq 5 at
device 12.1 on pci0
ohci3: [GIANT-LOCKED]
usb3: OHCI version 1.0
usb3: <NEC uPD 9210 USB controller> on ohci3
usb3: USB revision 1.0
uhub3: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0xdfffcf00-0xdfffcfff irq 11
at device 12.2 on pci0
ehci0: [GIANT-LOCKED]
ehci_pci_attach: companion usb2
ehci_pci_attach: companion usb3
usb4: EHCI version 0.95
usb4: companion controllers, 3 ports each: usb2 usb3
usb4: <NEC uPD 720100 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 5 ports with 5 removable, self powered
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
fdc0: <floppy drive controller> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3 irq 6 drq
2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fdc0: <floppy drive controller> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3 irq 6 drq
2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
orm0: <ISA Option ROMs> at iomem
0xcf000-0xd4fff,0xcd800-0xcefff,0xcc000-0xcd7ff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2000083456 Hz quality 800
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
pid 25: corrected slot count (0->1)
ad0: 117800MB <HDS722512VLAT80/V33OA6EA> [239340/16/63] at ata0-master
UDMA100
ad1: 39266MB <IC35L040AVER07-0/ER4OA44A> [79780/16/63] at ata0-slave UDMA100
ATAPI_RESET time = 70us
acd0: DVDR <MATSHITADVD-RAM SW-9571/A109> at ata1-master UDMA66
ad3: 176700MB <IC35L180AVV207-1/V26OA66A> [359010/16/63] at ata1-slave
UDMA100
cd0 at ata1 bus 0 target 0 lun 0
cd0: <MATSHITA DVD-RAM SW-9571 A109> Removable CD-ROM SCSI-0 device 
cd0: 66.000MB/s transfers
cd0: cd present [2236704 x 2048 byte records]
Mounting root from ufs:/dev/ad0s1a
fxp0: Microcode loaded, int_delay: 1000 usec  bundle_max: 6
fxp0: Microcode loaded, int_delay: 1000 usec  bundle_max: 6
em0: Link is up 100 Mbps Full Duplex
Accounting enabled
ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=93547835
ad0: WARNING - READ_DMA no interrupt but good status
ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=222272571
ad0: WARNING - READ_DMA no interrupt but good status
ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=226788623
ad0: WARNING - READ_DMA no interrupt but good status
ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=229423379
ad0: WARNING - READ_DMA no interrupt but good status
ad0: TIMEOUT - WRITE_DMA retrying (2 retries left) LBA=46139535
ad0: WARNING - WRITE_DMA no interrupt but good status
ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=54042843
ad0: WARNING - READ_DMA no interrupt but good status
ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=64945143
ad0: WARNING - READ_DMA no interrupt but good status
ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=110871947
ad0: WARNING - READ_DMA no interrupt but good status
ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=198562163
ad0: WARNING - READ_DMA no interrupt but good status
ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=203078227
ad0: WARNING - READ_DMA no interrupt but good status
ad0: TIMEOUT - WRITE_DMA retrying (2 retries left) LBA=16707487
ad0: WARNING - WRITE_DMA no interrupt but good status
ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=186518883
ad0: WARNING - READ_DMA no interrupt but good status
ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=197809407
ad0: WARNING - READ_DMA no interrupt but good status
ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=207594611
ad0: WARNING - READ_DMA no interrupt but good status
ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=171097435
ad0: WARNING - READ_DMA no interrupt but good status

_______________________________________________
freebsd-current at freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"

_______________________________________________
freebsd-current at freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"