ISDN4BSD broken...

[Matthias Schuendehuette]

Hello all,

there's still no change - ISDN4BSD still does not work with my TELES S0 
16.3 ISA-Card (no PnP).

I tried with 6-CURRENT from Sep 10, which has the new commits for 
ISDN4BSD from andre at freebsd.org, but this did not change anything.
(thanks for the hint, Gary!)

The last working Version is from Aug 11, 14:00 UTC - at 16:00 UTC it's 
broken.

The kernel files which changed in between are:

src/sys/dev/acpica/acpi_pci_link.c (-> 1.19)
src/sys/dev/acpica/acpi_pcib.c (-> 1.47)
src/sys/dev/acpica/acpi_pcib_acpi.c (-> 1.39)
src/sys/dev/acpica/acpi_pcib_pci.c (-> 1.10)
src/sys/dev/acpica/acpi_pcibvar.h (-> 1.3)

That's all I can do for now - if additional informations are required, 
please contact me and tell me how to retrieve them...

Ciao/BSD - Matthias

On Saturday 21 August 2004 19:27, Matthias Schuendehuette wrote:
> Hi,
>
> there's still no change with 5.3-BETA1 :-(
>
> On Saturday 14 August 2004 18:54, Matthias Schuendehuette wrote:
> > Hi all,
> >
> > I just rebooted into the new cuurent-kernel and found, that i4b
> > isn't working any more. Last working kernel was of Aug 11, around
> > 1800 UTC.
> >
> > Aug 14 18:19:46 current kernel: FreeBSD 5.2-CURRENT #0: \
> >  Sat Aug 14 17:43:56 CEST 2004
> > [...]
> > Aug 14 18:19:46 current kernel: ACPI link \_SB_.PCI0.LNKA \
> >  has invalid initial irq 9, ignoring
> > (this is a new message, which doesn't show up with my Aug 11
> > kernel) [...]
> > Aug 14 18:19:46 current kernel: isic0: [GIANT-LOCKED]
> > Aug 14 18:19:46 current kernel: isic0 at port \
> >  0x580-0x59f,0x180-0x19f,0x980-0x99f,0xd80-0xd9f \
> >  irq 10 flags 0x3 on isa0
> > Aug 14 18:19:46 current kernel: isic0: passive stack unit 0
> > Aug 14 18:19:46 current kernel: isic0: Teles S0/16.3
> > [...]
> > Aug 14 18:19:46 current kernel: i4bisppp: \
> >  2 ISDN SyncPPP device(s) attached
> > Aug 14 18:19:46 current kernel: i4b: \
> >  ISDN call control device attached
> > Aug 14 18:19:46 current kernel: i4btrc: \
> >  1 ISDN trace device(s) attached
> > Aug 14 18:19:46 current kernel: i4brbch: \
> >  2 raw B channel access device(s) attached
> > Aug 14 18:19:46 current kernel: i4btel: \
> >  2 ISDN telephony interface device(s) attached
> > Aug 14 18:19:46 current kernel: i4bipr: \
> >  2 IP over raw HDLC ISDN device(s) attached (VJ header compression)
> > Aug 14 18:19:46 current kernel: i4bctl: \
> >  ISDN system control port attached
> >
> > So far, the ISDN-Card is detected and attached as usual, but if I
> > try to dial out, the following messages were recorded:
> >
> > Aug 14 18:22:25 current kernel: i4b-L1 timer3_expired: \
> >  state = F4 Awaiting Signal
> > Aug 14 18:22:25 current kernel: i4b-L1 isic_recover: \
> >  HSCX B: ISTA = 0x0
> > Aug 14 18:22:25 current kernel: i4b-L1 isic_recover: \
> >    ISAC: ISTA = 0x94
> > Aug 14 18:22:25 current kernel: i4b-L1 isic_recover: \
> >    ISAC: CISQ = 0x1e
> > Aug 14 18:22:25 current kernel: i4b-L1 isic_recover: \
> >  HSCX B: IMASK = 0xff
> > Aug 14 18:22:25 current kernel: i4b-L1 isic_recover: \
> >  HSCX A: IMASK = 0xf8
> > Aug 14 18:22:25 current kernel: i4b-L1 isic_recover: \
> >    ISAC: IMASK = 0x2a
> > Aug 14 18:22:25 current kernel: i4b-L2 i4b_T202_timeout: \
> >  unit 0, N202 = 3
> > Aug 14 18:22:25 current kernel: i4b-L1 isic_ph_data_req: \
> >  still in state F3!
> > Aug 14 18:22:27 current kernel: i4b-L3 T303_timeout: \
> >  SETUP not answered, cr = 15
> > Aug 14 18:22:27 current kernel: i4b-L3 next_l3state: \
> >  FSM illegal state, state = ST_OW - Out Wait EST, \
> >  event = EV_T303EXP - T303 timeout!
> > Aug 14 18:22:27 current kernel: i4b-L1 timer3_expired: \
> >  state = F4 Awaiting Signal
> > Aug 14 18:22:27 current kernel: i4b-L1 isic_recover: \
> >  HSCX B: ISTA = 0x0
> > Aug 14 18:22:27 current kernel: i4b-L1 isic_recover: \
> >    ISAC: ISTA = 0x4
> > Aug 14 18:22:27 current kernel: i4b-L1 isic_recover: \
> >    ISAC: CISQ = 0x32
> > Aug 14 18:22:27 current kernel: i4b-L1 isic_recover: \
> >  HSCX B: IMASK = 0xff
> > Aug 14 18:22:27 current kernel: i4b-L1 isic_recover: \
> >  HSCX A: IMASK = 0xf8
> > Aug 14 18:22:27 current kernel: i4b-L1 isic_recover: \
> >    ISAC: IMASK = 0x2a
> >
> > Any ideas? ACPI or IRQ-Routing related?

-- 
Ciao/BSD - Matthias

Matthias Schuendehuette <msch [at] snafu.de>, Berlin (Germany)
PGP-Key at <pgp.mit.edu> and <wwwkeys.de.pgp.net> ID: 0xDDFB0A5F