rl0: watchdog timeout
Stefan Ehmann
shoesoft at gmx.net
Fri Sep 10 10:32:53 PDT 2004
I get rl0: watchdog timeout on a machine where i track RELENG_5. The
problem goes away if I disable acpi.
It seems that this was fixed for a couple of other people. cvsupped
today again but the problem still exists for me.
Here is the verbose dmesg:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA3 #2: Fri Sep 10 15:11:12 CEST 2004
Shoe at yesterday.pepperland:/usr/obj/usr/src/sys/YESTERDAY
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0896000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc0896200.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08962ac.
Calibrating clock(s) ... i8254 clock: 1193209 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 651484460 Hz
CPU: Intel Pentium III (651.48-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 402587648 (383 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c29000 - 0x00000000178fffff, 382562304 bytes (93399 pages)
avail memory = 384270336 (366 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fad40
bios32: Entry = 0xfb240 (c00fb240) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb270
pnpbios: Found PnP BIOS data at 0xc00fbf80
pnpbios: Entry = f0000:bfa8 Rev = 1.0
Other BIOS signatures found:
io: <I/O>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
mem: <memory>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <VIA692 AWRDACPI> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80003840
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06911106)
pcibios: BIOS version 2.10
Found $PIR table, 7 entries at 0xc00fde60
PCI-Only Interrupts: 5 10 11
Location Bus Device Pin Link IRQs
slot 1 0 9 A 0x01 3 4 5 7 9 10 11 12 14 15
slot 1 0 9 B 0x02 3 4 5 7 9 10 11 12 14 15
slot 1 0 9 C 0x03 3 4 5 7 9 10 11 12 14 15
slot 1 0 9 D 0x05 3 4 5 7 9 10 11 12 14 15
slot 2 0 10 A 0x02 3 4 5 7 9 10 11 12 14 15
slot 2 0 10 B 0x03 3 4 5 7 9 10 11 12 14 15
slot 2 0 10 C 0x05 3 4 5 7 9 10 11 12 14 15
slot 2 0 10 D 0x01 3 4 5 7 9 10 11 12 14 15
slot 3 0 11 A 0x03 3 4 5 7 9 10 11 12 14 15
slot 3 0 11 B 0x05 3 4 5 7 9 10 11 12 14 15
slot 3 0 11 C 0x01 3 4 5 7 9 10 11 12 14 15
slot 3 0 11 D 0x02 3 4 5 7 9 10 11 12 14 15
slot 4 0 12 A 0x05 3 4 5 7 9 10 11 12 14 15
slot 4 0 12 B 0x01 3 4 5 7 9 10 11 12 14 15
slot 4 0 12 C 0x02 3 4 5 7 9 10 11 12 14 15
slot 4 0 12 D 0x03 3 4 5 7 9 10 11 12 14 15
slot 5 0 13 A 0x05 3 4 5 7 9 10 11 12 14 15
slot 5 0 13 B 0x03 3 4 5 7 9 10 11 12 14 15
slot 5 0 13 C 0x02 3 4 5 7 9 10 11 12 14 15
slot 5 0 13 D 0x01 3 4 5 7 9 10 11 12 14 15
embedded 0 1 A 0x01 3 4 5 7 9 10 11 12 14 15
embedded 0 1 B 0x02 3 4 5 7 9 10 11 12 14 15
embedded 0 1 C 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 1 D 0x05 3 4 5 7 9 10 11 12 14 15
embedded 0 7 C 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 7 D 0x05 3 4 5 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: Power Button (fixed)
ACPI timer looks BAD min = 1, max = 6, width = 5
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port
0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
acpi link get: empty IRQ resource
ACPI PCI link initial configuration:
\\_SB_.PCI0.ISA_.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+
low,level,sharable 0.9.0
\\_SB_.PCI0.ISA_.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+
low,level,sharable 0.9.1
\\_SB_.PCI0.ISA_.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+
low,level,sharable 0.9.2
\\_SB_.PCI0.ISA_.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+
low,level,sharable 0.9.3
\\_SB_.PCI0.ISA_.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+
low,level,sharable 0.10.0
\\_SB_.PCI0.ISA_.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+
low,level,sharable 0.10.1
\\_SB_.PCI0.ISA_.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+
low,level,sharable 0.10.2
\\_SB_.PCI0.ISA_.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+
low,level,sharable 0.10.3
\\_SB_.PCI0.ISA_.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+
low,level,sharable 0.11.0
\\_SB_.PCI0.ISA_.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+
low,level,sharable 0.11.1
\\_SB_.PCI0.ISA_.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+
low,level,sharable 0.11.2
\\_SB_.PCI0.ISA_.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+
low,level,sharable 0.11.3
\\_SB_.PCI0.ISA_.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+
low,level,sharable 0.12.0
\\_SB_.PCI0.ISA_.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+
low,level,sharable 0.12.1
\\_SB_.PCI0.ISA_.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+
low,level,sharable 0.12.2
\\_SB_.PCI0.ISA_.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+
low,level,sharable 0.12.3
\\_SB_.PCI0.ISA_.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+
low,level,sharable 0.13.0
\\_SB_.PCI0.ISA_.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+
low,level,sharable 0.13.1
\\_SB_.PCI0.ISA_.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+
low,level,sharable 0.13.2
\\_SB_.PCI0.ISA_.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+
low,level,sharable 0.13.3
\\_SB_.PCI0.ISA_.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+
low,level,sharable 0.7.0
\\_SB_.PCI0.ISA_.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+
low,level,sharable 0.7.1
\\_SB_.PCI0.ISA_.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+
low,level,sharable 0.7.2
\\_SB_.PCI0.ISA_.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+
low,level,sharable 0.7.3
\\_SB_.PCI0.ISA_.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+
low,level,sharable 0.1.0
\\_SB_.PCI0.ISA_.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+
low,level,sharable 0.1.1
\\_SB_.PCI0.ISA_.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+
low,level,sharable 0.1.2
\\_SB_.PCI0.ISA_.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+
low,level,sharable 0.1.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base d8000000, size 26, enabled
found-> vendor=0x1106, dev=0x0691, revid=0x44
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x8598, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x0596, revid=0x23
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000e000, size 4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x10
bus=0, slot=7, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000e400, size 5, enabled
pcib0: matched entry for 0.7.INTD (src \\_SB_.PCI0.ISA_.LNKD)
pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.ISA_.LNKA (references 7, priority 145173):
interrupts: 11 10 5 12 7 6 4 3 15
14 1
penalty: 280 280 330 5280 5280 5280 5280 5280 50280
50280100280
\\_SB_.PCI0.ISA_.LNKB (references 7, priority 145173):
interrupts: 11 10 5 12 7 6 4 3 15
14 1
penalty: 280 280 330 5280 5280 5280 5280 5280 50280
50280100280
\\_SB_.PCI0.ISA_.LNKC (references 7, priority 145173):
interrupts: 11 10 5 12 7 6 4 3 15
14 1
penalty: 280 280 330 5280 5280 5280 5280 5280 50280
50280100280
\\_SB_.PCI0.ISA_.LNKD (references 7, priority 145173):
interrupts: 11 10 5 12 7 6 4 3 15
14 1
penalty: 280 280 330 5280 5280 5280 5280 5280 50280
50280100280
pcib0: slot 7 INTD routed to irq 10 via \\_SB_.PCI0.ISA_.LNKD
found-> vendor=0x1106, dev=0x3038, revid=0x11
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x3050, revid=0x30
bus=0, slot=7, func=3
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 0000e800, size 8, enabled
map[14]: type 1, range 32, base df000000, size 8, enabled
pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.ISA_.LNKB)
pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.ISA_.LNKA (references 7, priority 147178):
interrupts: 11 5 10 12 7 6 4 3 15
14 1
penalty: 560 610 630 5560 5560 5560 5560 5560 50560
50560100560
\\_SB_.PCI0.ISA_.LNKB (references 7, priority 147178):
interrupts: 11 5 10 12 7 6 4 3 15
14 1
penalty: 560 610 630 5560 5560 5560 5560 5560 50560
50560100560
\\_SB_.PCI0.ISA_.LNKC (references 7, priority 147178):
interrupts: 11 5 10 12 7 6 4 3 15
14 1
penalty: 560 610 630 5560 5560 5560 5560 5560 50560
50560100560
pcib0: slot 10 INTA routed to irq 5 via \\_SB_.PCI0.ISA_.LNKB
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=0, slot=10, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=5
map[10]: type 4, range 32, base 0000ec00, size 8, enabled
pcib0: matched entry for 0.13.INTA (src \\_SB_.PCI0.ISA_.LNKD)
pcib0: slot 13 INTA is already routed to irq 10
found-> vendor=0x13f6, dev=0x0111, revid=0x10
bus=0, slot=13, func=0
class=04-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem
0xd8000000-0xdbffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xd8000000
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xdc000000-0xddffffff
pcib1: prefetched decode 0xd0000000-0xd7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base dc000000, size 24, enabled
pcib1: device (null) requested decoded memory range
0xdc000000-0xdcffffff
map[14]: type 3, range 32, base d0000000, size 27, enabled
pcib1: device (null) requested decoded memory range
0xd0000000-0xd7ffffff
pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.ISA_.LNKA)
pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.ISA_.LNKA (references 7, priority 149182):
interrupts: 11 10 5 12 7 6 4 3 15
14 1
penalty: 840 910 960 5840 5840 5840 5840 5840 50840
50840100840
\\_SB_.PCI0.ISA_.LNKC (references 7, priority 149182):
interrupts: 11 10 5 12 7 6 4 3 15
14 1
penalty: 840 910 960 5840 5840 5840 5840 5840 50840
50840100840
pcib0: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.ISA_.LNKA
pcib1: slot 0 INTA is routed to irq 11
found-> vendor=0x10de, dev=0x0111, revid=0xb2
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C596B UDMA66 controller> port
0xe000-0xe00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe000
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1-master: stat=0xd0 err=0x00 lsb=0x0e msb=0x00
ata1-master: stat=0xd0 err=0x00 lsb=0x0e msb=0x00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=10 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 10 at device
7.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe400
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, HOST-PCI> at device 7.3 (no driver attached)
rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe800
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem
0xdf000000-0xdf0000ff irq 5 at device 10.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:50:fc:1e:52:9f
rl0: [MPSAFE]
pci0: <multimedia, audio> at device 13.0 (no driver attached)
fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on
acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x3 0x13 0x3 0x3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0x3 0xb 0x3 0x3
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 651484460 Hz quality 800
Timecounters tick every 10.000 msec
Linux ELF exec handler installed
lo0: bpf attached
cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on VIA 82C596B chip
ata0-master: setting UDMA66 on VIA 82C596B chip
ad0: <IC35L060AVER07-0/ER6OA46A> ATA-5 disk at ata0-master
ad0: 58644MB (120103200 sectors), 119150 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA66
GEOM: new disk ad0
ar: FreeBSD check1 failed
ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ATAPI_RESET time = 60us
ata1-master: pio=0x0b wdma=0x21 udma=0xffffffff cable=40pin
ATAPI_RESET time = 210us
ata1-master: setting PIO3 on VIA 82C596B chip
ata1-slave: setting PIO4 on VIA 82C596B chip
ata1-slave: setting UDMA33 on VIA 82C596B chip
acd0: <CR-4804TE/3.0D> CDRW drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 689KB/s (689KB/s), 2048KB buffer,
PIO3
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes: CDR, CDRW, test write
acd0: Audio: play, 2 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
acd1: <LITEON DVD-ROM LTD122/IL6J> DVDROM drive at ata1 as slave
acd1: 512KB buffer, UDMA33
acd1: Reads: CDR, CDRW, CDDA stream, DVDROM, packet
acd1: Writes:
acd1: Audio: play, 255 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: no/blank disc
[0] f:80 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:36210447
[1] f:00 typ:165 s(CHS):1023/0/1 e(CHS):1023/254/63 s:36210510
l:25157790
[2] f:00 typ:165 s(CHS):1023/0/1 e(CHS):1023/254/63 s:61368300
l:58733640
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 18539748864 end 18539781119
GEOM: Configure ad0s2, start 18539781120 length 12880788480 end
31420569599
GEOM: Configure ad0s3, start 31420569600 length 30071623680 end
61492193279
GEOM: Configure ad0s2a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s2b, start 268435456 length 783785984 end 1052221439
GEOM: Configure ad0s2c, start 0 length 12880788480 end 12880788479
GEOM: Configure ad0s2d, start 1052221440 length 268435456 end 1320656895
GEOM: Configure ad0s2e, start 1320656896 length 268435456 end 1589092351
GEOM: Configure ad0s2f, start 1589092352 length 11291696128 end
12880788479
GEOM: Configure ad0s3c, start 0 length 30071623680 end 30071623679
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
rl0: watchdog timeout
rl0: watchdog timeout
rl0: watchdog timeout
rl0: watchdog timeout
rl0: watchdog timeout
rl0: watchdog timeout
rl0: watchdog timeout
rl0: watchdog timeout
rl0: watchdog timeout
rl0: watchdog timeout
rl0: watchdog timeout
rl0: watchdog timeout
rl0: watchdog timeout
rl0: watchdog timeout
rl0: watchdog timeout
rl0: watchdog timeout
rl0: watchdog timeout
More information about the freebsd-current
mailing list