warning messages from root mount until login, also my rc.conf file

Rob europax at comcast.net
Thu Sep 9 13:37:46 PDT 2004


Sorry about attaching files but can't seem to put them inline with 
mozilla.  Perhaps Sylpheed would work better.

I can actually get even more warning messages if I delay logging in. 
For example, sendmail claims it can't find a socket and  comes back with 
a multitude of warnings.  In this particular case, just wanted to show a 
few examples.

Rob
-------------- next part --------------
#!/bin/sh
#

# This is rc.conf - a file full of useful variables that you can set
# to change the default startup behavior of your system.  You should
# not edit this file!  Put any overrides into one of the ${rc_conf_files}
# instead and you will be able to update these defaults later without
# spamming your local configuration information.
#
# The ${rc_conf_files} files should only contain values which override
# values set in this file.  This eases the upgrade path when defaults
# are changed and new features are added.
#
# All arguments must be in double or single quotes.
#
# $FreeBSD: src/etc/defaults/rc.conf,v 1.212 2004/07/27 00:28:16 mlaier Exp $

##############################################################
###  Important initial Boot-time options  ####################
##############################################################

apm_enable="YES"	# Set to YES to enable APM BIOS functions (or NO).
apmd_enable="YES"	# Run apmd to handle APM event from userland.
apmd_flags=""		# Flags to apmd (if enabled).
pccard_enable="NO"	# Set to YES if you want to configure PCCARD devices.
pccard_mem="DEFAULT"	# If pccard_enable=YES, this is card memory address.
pccard_beep="2"		# pccard beep type.
pccard_ifconfig="NO"	# Specialized pccard ethernet configuration (or NO).
pccardd_flags="-z"	# Additional flags for pccardd.
pccard_conf="/etc/defaults/pccard.conf"	# pccardd(8) config file
pccard_ether_delay="5"	# Delay before trying to start dhclient in pccard_ether
removable_interfaces=""	# Removable network interfaces for /etc/pccard_ether.
tmpmfs="AUTO"		# Set to YES to always create an mfs /tmp, NO to never
tmpsize="20m"		# Size of mfs /tmp if created
varmfs="AUTO"		# Set to YES to always create an mfs /var, NO to never
varsize="32m"		# Size of mfs /var if created
populate_var="AUTO"	# Set to YES to always (re)populate /var, NO to never
local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs.
rc_conf_files="/etc/rc.conf /etc/rc.conf.local"

background_fsck="YES"	# Attempt to run fsck in the background where possible.
background_fsck_delay="60" # Time to wait (seconds) before starting the fsck.
			# mount at startup (or NO).

##############################################################
###  Network configuration sub-section  ######################
##############################################################

### Basic network and firewall/security options: ###
firewall_enable="NO"		# Set to YES to enable firewall functionality
firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
firewall_type="UNKNOWN"		# Firewall type (see /etc/rc.firewall)
firewall_quiet="NO"		# Set to YES to suppress rule display
firewall_logging="NO"		# Set to YES to enable events logging
firewall_flags=""		# Flags passed to ipfw when type is a file
ip_portrange_first="NO"		# Set first dynamically allocated port
ip_portrange_last="NO"		# Set last dynamically allocated port
ipfilter_enable="YES"		# Set to YES to enable ipfilter functionality
ipfilter_program="/sbin/ipf"	# where the ipfilter program lives
ipfilter_rules="/etc/ipf.rules"	# rules definition file for ipfilter, see
				# /usr/src/contrib/ipfilter/rules for examples
ipfilter_flags=""		# additional flags for ipfilter
ipmon_enable="YES"		# Set to YES for ipmon; needs ipfilter or ipnat
ipmon_program="/sbin/ipmon"	# where the ipfilter monitor program lives
ipmon_flags="-Ds"		# typically "-Ds" or "-D /var/log/ipflog"
tcp_keepalive="YES"		# Enable stale TCP connection timeout (or NO).
# For the following option you need to have TCP_DROP_SYNFIN set in your
# kernel.  Please refer to LINT and NOTES for details.
tcp_drop_synfin="YES"		# Set to YES to drop TCP packets with SYN+FIN
				# NOTE: this violates the TCP specification
icmp_drop_redirect="YES" 	# Set to YES to ignore ICMP REDIRECT packet
icmp_log_redirect="YES"		# Set to YES to log ICMP REDIRECT packets
network_interfaces="auto"	# List of network interfaces (or "auto").
syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
syslogd_flags="-s"		# Flags to syslogd (if enabled).
#syslogd_flags="-ss"		# Syslogd flags to not bind an inet socket
inetd_enable="YES"		# Run the network daemon dispatcher (YES/NO).
inetd_program="/usr/sbin/inetd"	# path to inetd, if you want a different one.
inetd_flags="-wW -C 60"		# Optional flags to inetd
#
sshd_enable="YES"		# Enable sshd
sshd_program="/usr/sbin/sshd"	# path to sshd, if you want a different one.
sshd_flags=""			# Additional flags for sshd.


##############################################################
###  System console options  #################################
##############################################################

moused_enable="YES"	# Run the mouse daemon.
moused_type="auto"	# See man page for rc.conf(5) for available settings.
moused_port="/dev/psm0"	# Set to your mouse port.
moused_flags=""		# Any additional flags to moused.
mousechar_start="NO"	# if 0xd0-0xd3 default range is occupied in your
			# language code table, specify alternative range
			# start like mousechar_start=3, see vidcontrol(1)

##############################################################
###  Mail Transfer Agent (MTA) options  ######################
##############################################################

mta_start_script="/etc/rc.sendmail"
			# Script to start your chosen MTA, called by /etc/rc.
# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail:
sendmail_enable="NO"	# Run the sendmail inbound daemon (YES/NO).
sendmail_pidfile="/var/run/sendmail.pid"	# sendmail pid file
sendmail_procname="/usr/sbin/sendmail"		# sendmail process name
sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
sendmail_submit_enable="YES"	# Start a localhost-only MTA for mail submission
sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
				# Flags for localhost-only MTA
sendmail_outbound_enable="YES"	# Dequeue stuck mail (YES/NO).
sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
sendmail_msp_queue_enable="YES"	# Dequeue stuck clientmqueue mail (YES/NO).
sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
				# Flags for sendmail_msp_queue daemon.


##############################################################
###  Miscellaneous administrative options  ###################
##############################################################

cron_enable="YES"	# Run the periodic job daemon.
cron_program="/usr/sbin/cron"	# Which cron executable to run (if enabled).
cron_dst="YES"		# Handle DST transitions intelligently (YES/NO)
cron_flags=""		# Which options to pass to the cron daemon.
lpd_enable="YES"		# Run the line printer daemon.
lpd_program="/usr/sbin/lpd"	# path to lpd, if you want a different one.
lpd_flags=""		# Flags to lpd (if enabled).
usbd_enable="YES"	# Run the usbd daemon.
usbd_flags=""		# Flags to usbd (if enabled).
linux_enable="YES"	# Linux binary compatibility loaded at startup (or NO).
ldconfig_insecure="YES"	# Set to YES to disable ldconfig security checks
ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib"
			# shared library search paths
ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout"
			# a.out shared library search paths
kern_securelevel_enable="NO"	# kernel security level (see init(8)),
kern_securelevel="-1"	# range: -1..3 ; `-1' is the most insecure
dmesg_enable="YES"	# Save dmesg(8) to /var/run/dmesg.boot
performance_throttle_state="HIGH"	# Online throttling state


# Enable network daemons for user convenience.
# Created: Tue Sep  7 03:09:30 2004
# -- sysinstall generated deltas -- # Tue Sep  7 03:09:30 2004
ifconfig_bfe0="inet 192.168.1.101  netmask 255.255.255.0"
defaultrouter="192.168.1.1"
hostname="lm741n.comcast.net"
# This file now contains just the overrides from /etc/defaults/rc.conf.
# Please make all changes to this file, not to /etc/defaults/rc.conf.

-------------- next part --------------
Sep  7 20:07:41 lm741n kernel: Mounting root from ufs:/dev/ad0s3a
Sep  7 20:07:41 lm741n root: /etc/rc: WARNING: $ipxrouted_enable is not set properly - see rc.conf(5).
Sep  7 20:07:41 lm741n root: /etc/rc: WARNING: $kerberos5_server_enable is not set properly - see rc.conf(5).
Sep  7 20:07:41 lm741n root: /etc/rc: WARNING: $kadmind5_server_enable is not set properly - see rc.conf(5).
Sep  7 20:07:41 lm741n root: /etc/rc: WARNING: $kpasswdd_server_enable is not set properly - see rc.conf(5).
Sep  7 20:07:41 lm741n root: /etc/rc: WARNING: $named_enable is not set properly - see rc.conf(5).
Sep  7 20:07:41 lm741n root: /etc/rc: WARNING: $enable_quotas is not set properly - see rc.conf(5).
Sep  7 20:07:41 lm741n root: /etc/rc: WARNING: $pflog_enable is not set properly - see rc.conf(5).
Sep  7 20:07:41 lm741n root: /etc/rc: WARNING: $pf_enable is not set properly - see rc.conf(5).
Sep  7 20:07:41 lm741n root: /etc/rc: WARNING: $pppoed_enable is not set properly - see rc.conf(5).
Sep  7 20:07:41 lm741n root: /etc/rc: WARNING: $virecover_enable is not set properly - see rc.conf(5).
Sep  7 20:07:41 lm741n root: /etc/rc: WARNING: $timed_enable is not set properly - see rc.conf(5).
Sep  7 20:07:42 lm741n root: /etc/rc: WARNING: /dev/apmctl not found; kernel is missing apm(4)
Sep  7 20:07:42 lm741n apmd[385]: start
Sep  7 20:07:42 lm741n root: /etc/rc: WARNING: $bootparamd_enable is not set properly - see rc.conf(5).
Sep  7 20:07:42 lm741n lpd[397]: lpd startup: logging=0
Sep  7 20:07:42 lm741n root: /etc/rc: WARNING: $update_motd is not set properly - see rc.conf(5).
Sep  7 20:07:42 lm741n root: /etc/rc: WARNING: $ntpd_enable is not set properly - see rc.conf(5).
Sep  7 20:07:42 lm741n root: /etc/rc: WARNING: $rarpd_enable is not set properly - see rc.conf(5).
Sep  7 20:07:42 lm741n root: /etc/rc: WARNING: $rtadvd_enable is not set properly - see rc.conf(5).
Sep  7 20:07:42 lm741n root: /etc/rc: WARNING: $rwhod_enable is not set properly - see rc.conf(5).
Sep  7 20:07:42 lm741n root: /etc/rc: WARNING: $ibcs2_enable is not set properly - see rc.conf(5).
Sep  7 20:07:42 lm741n root: /etc/rc: WARNING: $sysvipc_enable is not set properly - see rc.conf(5).
Sep  7 20:07:44 lm741n root: /etc/rc: WARNING: $svr4_enable is not set properly - see rc.conf(5).
Sep  7 20:07:44 lm741n root: /etc/rc: WARNING: $jail_enable is not set properly - see rc.conf(5).
Sep  7 20:07:44 lm741n root: /etc/rc: WARNING: $ntpdate_enable is not set properly - see rc.conf(5).
Sep  7 20:19:05 lm741n kernel: ugen1: NEC NEC USB UF000x, rev 1.10/1.50, addr 2
Sep  7 20:20:27 lm741n kernel: ugen1: at uhub0 port 1 (addr 2) disconnected
Sep  7 20:20:27 lm741n kernel: ugen1: detached
Sep  7 21:51:38 lm741n login: ROOT LOGIN (root) ON ttyv1
Sep  7 21:56:09 lm741n su: rob to root on /dev/ttyv0
Sep  7 22:00:56 lm741n shutdown: shutdown by rob: 
Sep  7 22:00:59 lm741n root: /etc/rc.shutdown: WARNING: $jail_enable is not set properly - see rc.conf(5).
Sep  7 22:00:59 lm741n root: /etc/rc.shutdown: WARNING: $ipfs_enable is not set properly - see rc.conf(5).
Sep  7 22:00:59 lm741n syslogd: exiting on signal 15
Sep  7 22:01:10 lm741n syslogd: kernel boot file is /boot/kernel/kernel
Sep  7 22:01:10 lm741n root: /etc/rc: WARNING: $ipxrouted_enable is not set properly - see rc.conf(5).
Sep  7 22:01:10 lm741n root: /etc/rc: WARNING: $kerberos5_server_enable is not set properly - see rc.conf(5).
Sep  7 22:01:10 lm741n root: /etc/rc: WARNING: $kadmind5_server_enable is not set properly - see rc.conf(5).
Sep  7 22:01:10 lm741n root: /etc/rc: WARNING: $kpasswdd_server_enable is not set properly - see rc.conf(5).
Sep  7 22:01:10 lm741n root: /etc/rc: WARNING: $named_enable is not set properly - see rc.conf(5).
Sep  7 22:01:10 lm741n root: /etc/rc: WARNING: $enable_quotas is not set properly - see rc.conf(5).
Sep  7 22:01:10 lm741n root: /etc/rc: WARNING: $pflog_enable is not set properly - see rc.conf(5).
Sep  7 22:01:10 lm741n root: /etc/rc: WARNING: $pf_enable is not set properly - see rc.conf(5).
Sep  7 22:01:10 lm741n root: /etc/rc: WARNING: $pppoed_enable is not set properly - see rc.conf(5).
Sep  7 22:01:10 lm741n root: /etc/rc: WARNING: $virecover_enable is not set properly - see rc.conf(5).
Sep  7 22:01:11 lm741n root: /etc/rc: WARNING: $timed_enable is not set properly - see rc.conf(5).
Sep  7 22:01:11 lm741n root: /etc/rc: WARNING: /dev/apmctl not found; kernel is missing apm(4)
Sep  7 22:01:11 lm741n apmd[1212]: start
Sep  7 22:01:11 lm741n root: /etc/rc: WARNING: $bootparamd_enable is not set properly - see rc.conf(5).
Sep  7 22:01:11 lm741n lpd[1224]: lpd startup: logging=0
Sep  7 22:01:11 lm741n root: /etc/rc: WARNING: $update_motd is not set properly - see rc.conf(5).
Sep  7 22:01:11 lm741n root: /etc/rc: WARNING: $ntpd_enable is not set properly - see rc.conf(5).
Sep  7 22:01:11 lm741n root: /etc/rc: WARNING: $rarpd_enable is not set properly - see rc.conf(5).
Sep  7 22:01:11 lm741n root: /etc/rc: WARNING: $rtadvd_enable is not set properly - see rc.conf(5).
Sep  7 22:01:11 lm741n root: /etc/rc: WARNING: $rwhod_enable is not set properly - see rc.conf(5).
Sep  7 22:01:11 lm741n root: /etc/rc: WARNING: $ibcs2_enable is not set properly - see rc.conf(5).
Sep  7 22:01:11 lm741n root: /etc/rc: WARNING: $sysvipc_enable is not set properly - see rc.conf(5).
Sep  7 22:01:13 lm741n root: /etc/rc: WARNING: $svr4_enable is not set properly - see rc.conf(5).
Sep  7 22:01:13 lm741n root: /etc/rc: WARNING: $jail_enable is not set properly - see rc.conf(5).
Sep  7 22:01:13 lm741n root: /etc/rc: WARNING: $ntpdate_enable is not set properly - see rc.conf(5).
Sep  7 22:03:04 lm741n su: rob to root on /dev/ttyv0
Sep  7 23:21:48 lm741n shutdown: power-down by rob: 
Sep  7 23:21:50 lm741n root: /etc/rc.shutdown: WARNING: $jail_enable is not set properly - see rc.conf(5).
Sep  7 23:21:50 lm741n root: /etc/rc.shutdown: WARNING: $ipfs_enable is not set properly - see rc.conf(5).
Sep  7 23:21:50 lm741n syslogd: exiting on signal 15
Sep  9 13:14:01 lm741n syslogd: kernel boot file is /boot/kernel/kernel
Sep  9 13:14:01 lm741n kernel: Copyright (c) 1992-2004 The FreeBSD Project.
Sep  9 13:14:01 lm741n kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Sep  9 13:14:01 lm741n kernel: The Regents of the University of California. All rights reserved.
Sep  9 13:14:01 lm741n kernel: FreeBSD 5.3-BETA2 #0: Mon Sep  6 22:22:52 PDT 2004
Sep  9 13:14:01 lm741n kernel: root@:/usr/src/sys/i386/compile/ROBKERN
Sep  9 13:14:01 lm741n kernel: WARNING: WITNESS option enabled, expect reduced performance.
Sep  9 13:14:01 lm741n kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
Sep  9 13:14:01 lm741n kernel: CPU: Intel(R) Pentium(R) M processor 1700MHz (1698.57-MHz 686-class CPU)
Sep  9 13:14:01 lm741n kernel: Origin = "GenuineIntel"  Id = 0x695  Stepping = 5
Sep  9 13:14:01 lm741n kernel: Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
Sep  9 13:14:01 lm741n kernel: real memory  = 1073405952 (1023 MB)
Sep  9 13:14:01 lm741n kernel: avail memory = 1040867328 (992 MB)
Sep  9 13:14:01 lm741n kernel: npx0: [FAST]
Sep  9 13:14:01 lm741n kernel: npx0: <math processor> on motherboard
Sep  9 13:14:01 lm741n kernel: npx0: INT 16 interface
Sep  9 13:14:01 lm741n kernel: pcib0: <Host to PCI bridge> pcibus 0 on motherboard
Sep  9 13:14:01 lm741n kernel: pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard
Sep  9 13:14:01 lm741n kernel: $PIR: BIOS IRQ 11 for 0.29.INTB is not valid for link 0x63
Sep  9 13:14:01 lm741n kernel: $PIR: BIOS IRQ 11 for 2.1.INTA is not valid for link 0x63
Sep  9 13:14:01 lm741n kernel: pci0: <PCI bus> on pcib0
Sep  9 13:14:01 lm741n kernel: agp0: <Intel 82855 host to AGP bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0
Sep  9 13:14:01 lm741n kernel: pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
Sep  9 13:14:01 lm741n kernel: pci1: <PCI bus> on pcib1
Sep  9 13:14:01 lm741n kernel: pci1: <display, VGA> at device 0.0 (no driver attached)
Sep  9 13:14:01 lm741n kernel: uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0
Sep  9 13:14:01 lm741n kernel: uhci0: [GIANT-LOCKED]
Sep  9 13:14:01 lm741n kernel: usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
Sep  9 13:14:01 lm741n kernel: usb0: USB revision 1.0
Sep  9 13:14:01 lm741n kernel: uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
Sep  9 13:14:01 lm741n kernel: uhub0: 2 ports with 2 removable, self powered
Sep  9 13:14:01 lm741n kernel: uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq 11 at device 29.1 on pci0
Sep  9 13:14:01 lm741n kernel: uhci1: [GIANT-LOCKED]
Sep  9 13:14:01 lm741n kernel: usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
Sep  9 13:14:01 lm741n kernel: usb1: USB revision 1.0
Sep  9 13:14:01 lm741n kernel: uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
Sep  9 13:14:01 lm741n kernel: uhub1: 2 ports with 2 removable, self powered
Sep  9 13:14:01 lm741n kernel: uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq 11 at device 29.2 on pci0
Sep  9 13:14:01 lm741n kernel: uhci2: [GIANT-LOCKED]
Sep  9 13:14:01 lm741n kernel: usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
Sep  9 13:14:01 lm741n kernel: usb2: USB revision 1.0
Sep  9 13:14:01 lm741n kernel: uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
Sep  9 13:14:01 lm741n kernel: uhub2: 2 ports with 2 removable, self powered
Sep  9 13:14:01 lm741n kernel: pci0: <serial bus, USB> at device 29.7 (no driver attached)
Sep  9 13:14:01 lm741n kernel: pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
Sep  9 13:14:01 lm741n kernel: pci2: <PCI bus> on pcib2
Sep  9 13:14:01 lm741n kernel: bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xfaffe000-0xfaffffff irq 11 at device 0.0 on pci2
Sep  9 13:14:01 lm741n kernel: miibus0: <MII bus> on bfe0
Sep  9 13:14:01 lm741n kernel: bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
Sep  9 13:14:01 lm741n kernel: bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Sep  9 13:14:01 lm741n kernel: bfe0: Ethernet address: 00:0d:56:38:b8:a0
Sep  9 13:14:01 lm741n kernel: bfe0: [GIANT-LOCKED]
Sep  9 13:14:01 lm741n kernel: cbb0: <TI4510 PCI-CardBus Bridge> irq 11 at device 1.0 on pci2
Sep  9 13:14:01 lm741n kernel: cardbus0: <CardBus bus> on cbb0
Sep  9 13:14:01 lm741n kernel: pccard0: <16-bit PCCard bus> on cbb0
Sep  9 13:14:01 lm741n kernel: fwohci0: <1394 Open Host Controller Interface> mem 0xfaff8000-0xfaffbfff,0xfaffd800-0xfaffdfff irq 11 at device 1.1 on pci2
Sep  9 13:14:01 lm741n kernel: fwohci0: [GIANT-LOCKED]
Sep  9 13:14:01 lm741n kernel: fwohci0: OHCI version 1.10 (ROM=0)
Sep  9 13:14:01 lm741n kernel: fwohci0: No. of Isochronous channels is 4.
Sep  9 13:14:01 lm741n kernel: fwohci0: EUI64 5b:4f:c0:00:3f:ff:ff:ff
Sep  9 13:14:01 lm741n kernel: fwohci0: Phy 1394a available S400, 2 ports.
Sep  9 13:14:01 lm741n kernel: fwohci0: Link S400, max_rec 2048 bytes.
Sep  9 13:14:01 lm741n kernel: firewire0: <IEEE1394(FireWire) bus> on fwohci0
Sep  9 13:14:01 lm741n kernel: sbp0: <SBP-2/SCSI over FireWire> on firewire0
Sep  9 13:14:01 lm741n kernel: fwe0: <Ethernet over FireWire> on firewire0
Sep  9 13:14:01 lm741n kernel: if_fwe0: Fake Ethernet address: 5a:4f:c0:ff:ff:ff
Sep  9 13:14:01 lm741n kernel: fwe0: Ethernet address: 5a:4f:c0:ff:ff:ff
Sep  9 13:14:01 lm741n kernel: fwohci0: Initiate bus reset
Sep  9 13:14:01 lm741n kernel: fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
Sep  9 13:14:01 lm741n kernel: firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
Sep  9 13:14:01 lm741n kernel: firewire0: bus manager 0 (me)
Sep  9 13:14:01 lm741n kernel: pci2: <network> at device 3.0 (no driver attached)
Sep  9 13:14:01 lm741n kernel: isab0: <PCI-ISA bridge> at device 31.0 on pci0
Sep  9 13:14:01 lm741n kernel: isa0: <ISA bus> on isab0
Sep  9 13:14:01 lm741n kernel: atapci0: <Intel ICH4 UDMA100 controller> port 0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
Sep  9 13:14:01 lm741n kernel: ata0: channel #0 on atapci0
Sep  9 13:14:01 lm741n kernel: ata1: channel #1 on atapci0
Sep  9 13:14:01 lm741n kernel: pcm0: <Intel ICH4 (82801DB)> port 0xbc40-0xbc7f,0xb800-0xb8ff mem 0xf4fff400-0xf4fff4ff,0xf4fff800-0xf4fff9ff irq 11 at device 31.5 on pci0
Sep  9 13:14:01 lm741n kernel: pcm0: [GIANT-LOCKED]
Sep  9 13:14:01 lm741n kernel: pcm0: <SigmaTel STAC9750/51 AC97 Codec>
Sep  9 13:14:01 lm741n kernel: pci0: <simple comms> at device 31.6 (no driver attached)
Sep  9 13:14:01 lm741n kernel: cpu0 on motherboard
Sep  9 13:14:01 lm741n kernel: orm0: <ISA Option ROMs> at iomem 0xcf800-0xcffff,0xc0000-0xcf7ff on isa0
Sep  9 13:14:01 lm741n kernel: pmtimer0 on isa0
Sep  9 13:14:01 lm741n kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
Sep  9 13:14:01 lm741n kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
Sep  9 13:14:01 lm741n kernel: kbd0 at atkbd0
Sep  9 13:14:01 lm741n kernel: atkbd0: [GIANT-LOCKED]
Sep  9 13:14:01 lm741n kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0
Sep  9 13:14:01 lm741n kernel: psm0: [GIANT-LOCKED]
Sep  9 13:14:01 lm741n kernel: psm0: model GlidePoint, device ID 0
Sep  9 13:14:01 lm741n kernel: fdc0: ready for input in output
Sep  9 13:14:01 lm741n kernel: fdc0: cmd 3 failed at out byte 1 of 3
Sep  9 13:14:01 lm741n kernel: ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
Sep  9 13:14:01 lm741n kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
Sep  9 13:14:01 lm741n kernel: ppc0: FIFO with 16/16/8 bytes threshold
Sep  9 13:14:01 lm741n kernel: ppbus0: <Parallel port bus> on ppc0
Sep  9 13:14:01 lm741n kernel: plip0: <PLIP network interface> on ppbus0
Sep  9 13:14:01 lm741n kernel: lpt0: <Printer> on ppbus0
Sep  9 13:14:01 lm741n kernel: lpt0: Interrupt-driven port
Sep  9 13:14:01 lm741n kernel: ppi0: <Parallel I/O> on ppbus0
Sep  9 13:14:01 lm741n kernel: sc0: <System console> at flags 0x100 on isa0
Sep  9 13:14:01 lm741n kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Sep  9 13:14:01 lm741n kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
Sep  9 13:14:01 lm741n kernel: sio0: type 16550A
Sep  9 13:14:01 lm741n kernel: sio1: configured irq 3 not in bitmap of probed irqs 0
Sep  9 13:14:01 lm741n kernel: sio1: port may not be enabled
Sep  9 13:14:01 lm741n kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Sep  9 13:14:01 lm741n kernel: unknown: <PNP0303> can't assign resources (port)
Sep  9 13:14:01 lm741n kernel: unknown: <PNP0f13> can't assign resources (irq)
Sep  9 13:14:01 lm741n kernel: unknown: <PNP0501> can't assign resources (port)
Sep  9 13:14:01 lm741n kernel: unknown: <PNP0401> can't assign resources (port)
Sep  9 13:14:01 lm741n kernel: Timecounter "TSC" frequency 1698567438 Hz quality 800
Sep  9 13:14:01 lm741n kernel: Timecounters tick every 10.000 msec
Sep  9 13:14:01 lm741n kernel: IP Filter: v3.4.35 initialized.  Default = pass all, Logging = enabled
Sep  9 13:14:01 lm741n kernel: cardbus0: Resource not specified in CIS: id=10, size=1000
Sep  9 13:14:01 lm741n kernel: ohci0: <NEC uPD 9210 USB controller> mem 0xf6001000-0xf6001fff irq 11 at device 0.0 on cardbus0
Sep  9 13:14:01 lm741n kernel: ohci0: [GIANT-LOCKED]
Sep  9 13:14:01 lm741n kernel: usb3: OHCI version 1.0
Sep  9 13:14:01 lm741n kernel: ad0: 57231MB <HTS726060M9AT00/MH4OA68A> [116280/16/63] at ata0-master PIO4
Sep  9 13:14:01 lm741n kernel: ATAPI_RESET time = 30us
Sep  9 13:14:01 lm741n kernel: acd0: CDRW <_NEC DVD+RW ND-5100A/10AC> at ata1-master PIO4
Sep  9 13:14:01 lm741n kernel: usb3: <NEC uPD 9210 USB controller> on ohci0
Sep  9 13:14:01 lm741n kernel: usb3: USB revision 1.0
Sep  9 13:14:01 lm741n kernel: uhub3: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
Sep  9 13:14:01 lm741n kernel: uhub3: 3 ports with 3 removable, self powered
Sep  9 13:14:01 lm741n kernel: cardbus0: Resource not specified in CIS: id=10, size=1000
Sep  9 13:14:01 lm741n kernel: ohci1: <NEC uPD 9210 USB controller> mem 0xf6002000-0xf6002fff irq 11 at device 0.1 on cardbus0
Sep  9 13:14:01 lm741n kernel: ohci1: [GIANT-LOCKED]
Sep  9 13:14:01 lm741n kernel: usb4: OHCI version 1.0
Sep  9 13:14:01 lm741n kernel: usb4: <NEC uPD 9210 USB controller> on ohci1
Sep  9 13:14:01 lm741n kernel: usb4: USB revision 1.0
Sep  9 13:14:01 lm741n kernel: uhub4: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
Sep  9 13:14:01 lm741n kernel: uhub4: 2 ports with 2 removable, self powered
Sep  9 13:14:01 lm741n kernel: cardbus0: Resource not specified in CIS: id=10, size=100
Sep  9 13:14:01 lm741n kernel: cardbus0: <serial bus, USB> at device 0.2 (no driver attached)
Sep  9 13:14:01 lm741n kernel: ugen0: Orange Micro iBOT2 Camera, rev 2.00/1.00, addr 2
Sep  9 13:14:01 lm741n kernel: Mounting root from ufs:/dev/ad0s3a
Sep  9 13:14:01 lm741n root: /etc/rc: WARNING: $ipxrouted_enable is not set properly - see rc.conf(5).
Sep  9 13:14:01 lm741n root: /etc/rc: WARNING: $kerberos5_server_enable is not set properly - see rc.conf(5).
Sep  9 13:14:01 lm741n root: /etc/rc: WARNING: $kadmind5_server_enable is not set properly - see rc.conf(5).
Sep  9 13:14:01 lm741n root: /etc/rc: WARNING: $kpasswdd_server_enable is not set properly - see rc.conf(5).
Sep  9 13:14:01 lm741n root: /etc/rc: WARNING: $named_enable is not set properly - see rc.conf(5).
Sep  9 13:14:01 lm741n root: /etc/rc: WARNING: $enable_quotas is not set properly - see rc.conf(5).
Sep  9 13:14:01 lm741n root: /etc/rc: WARNING: $pflog_enable is not set properly - see rc.conf(5).
Sep  9 13:14:01 lm741n root: /etc/rc: WARNING: $pf_enable is not set properly - see rc.conf(5).
Sep  9 13:14:01 lm741n root: /etc/rc: WARNING: $pppoed_enable is not set properly - see rc.conf(5).
Sep  9 13:14:01 lm741n root: /etc/rc: WARNING: $virecover_enable is not set properly - see rc.conf(5).
Sep  9 13:14:01 lm741n root: /etc/rc: WARNING: $timed_enable is not set properly - see rc.conf(5).
Sep  9 13:14:01 lm741n root: /etc/rc: WARNING: /dev/apmctl not found; kernel is missing apm(4)
Sep  9 13:14:02 lm741n apmd[385]: start
Sep  9 13:14:02 lm741n root: /etc/rc: WARNING: $bootparamd_enable is not set properly - see rc.conf(5).
Sep  9 13:14:02 lm741n lpd[397]: lpd startup: logging=0
Sep  9 13:14:02 lm741n root: /etc/rc: WARNING: $update_motd is not set properly - see rc.conf(5).
Sep  9 13:14:02 lm741n root: /etc/rc: WARNING: $ntpd_enable is not set properly - see rc.conf(5).
Sep  9 13:14:02 lm741n root: /etc/rc: WARNING: $rarpd_enable is not set properly - see rc.conf(5).
Sep  9 13:14:02 lm741n root: /etc/rc: WARNING: $rtadvd_enable is not set properly - see rc.conf(5).
Sep  9 13:14:02 lm741n root: /etc/rc: WARNING: $rwhod_enable is not set properly - see rc.conf(5).
Sep  9 13:14:02 lm741n root: /etc/rc: WARNING: $ibcs2_enable is not set properly - see rc.conf(5).
Sep  9 13:14:02 lm741n root: /etc/rc: WARNING: $sysvipc_enable is not set properly - see rc.conf(5).
Sep  9 13:14:04 lm741n root: /etc/rc: WARNING: $svr4_enable is not set properly - see rc.conf(5).
Sep  9 13:14:04 lm741n root: /etc/rc: WARNING: $jail_enable is not set properly - see rc.conf(5).
Sep  9 13:14:04 lm741n root: /etc/rc: WARNING: $ntpdate_enable is not set properly - see rc.conf(5).
Sep  9 13:14:34 lm741n login: ROOT LOGIN (root) ON ttyv0


More information about the freebsd-current mailing list