Sound oscillates after upgrade to kde3.3.
Ion-Mihai Tetcu
itetcu at people.tecnik93.com
Wed Sep 8 15:20:13 PDT 2004
On Tue, 07 Sep 2004 17:43:58 -0500
eculp <eculp at prodigy.net.mx> wrote:
>
>
> ----- Mensaje original -----
> De: Ion-Mihai Tetcu <itetcu at people.tecnik93.com>
> Fecha: Martes, Septiembre 7, 2004 4:57 pm
> Asunto: Re: Sound oscillates after upgrade to kde3.3.
>
> > On Tue, 07 Sep 2004 16:42:25 -0500
> > eculp <eculp at prodigy.net.mx> wrote:
> >
> > > I'm using today's current and just finished a kde3.3 upgrade
> > following> the instructions in ports/UPDATING all the way down to
> > >
> > > rm ~/.kde/share/config/knotifyrc
> > >
> > > Although my problem isn't no sound but a high pitched oscillation.
> > >
> > > My sound is using the snd_via8233.ko loaded from the loader.conf
> > which> also loads sound.ko. The pciconf -lv shows:
> > >
> > > pcm0 at pci0:17:5: class=0x040100 card=0xa1011019 chip=0x30591106
> > > rev=0x50 hdr=0x00
> > > vendor = 'VIA Technologies Inc'
> > > device = 'VT8233/33A/8235/8237 AC97 Enhanced Audio
> > > Controller'
> > > class = multimedia
> > > subclass = audio
> > >
> > > I've tried disabling acpi with no change. I'm runing kdm and it
> > > starts at the end of the load cycle.
> > >
> > > I have no idea if the problem is the OS or KDE. Does anyone have
> > any> troubleshooting suggestions?
> >
> > pcm0 at pci0:17:5: class=0x040100 card=0xa0021458 chip=0x30591106
> > rev=0x50hdr=0x00 vendor = 'VIA Technologies Inc'
> > device = 'VT8233/33A/8235/8237 AC97 Enhanced Audio Controller'
> > class = multimedia
> > subclass = audio
> >
> > # cat /dev/sndstat
> > FreeBSD Audio Driver (newpcm)
> > Installed devices:
> > pcm0: <VIA VT8235> at io 0xe400 irq 22 kld snd_via8233 (5p/1r/0v
> > channels duplex default)
> >
> > seems to be OK for xmms and mplayer. I'm building kde-multimedia
> > now.
> >
> Once I stop the oscillations in kde, it works great but I'm still
> working on a system that doesn't miss and I've not been very
> successful. Basically I have to do a kldunload vo the via snd driver.
>
> Thanks for your response and let me know if you are using the same
> driver and get it working without problems.
snd_via8233_load="YES" in loader.conf
--
IOnut
Unregistered ;) FreeBSD "user"
5.3-BETA3 - try `sysctl debug.witness_watch=0`
and prepare to fly :-)
More information about the freebsd-current
mailing list