Realtek D-Link DFE-690TXD (PCMCIA) unstable

David Weinstein daemonize at gmail.com
Tue Sep 7 14:35:44 PDT 2004


I installed 5.3-BETA2 from my university's mirror the other night and
had no problem using the ftp to transfer large files to install my
system. However, when attempting to cvsup the system today it abruptly
stopped in the middle and acted as if there was no longer a connection
available. I get rl0: discard oversize frame (ether type 800 flags 3
len 63907 > max 1514) after a long time of waiting (I went to class
and when I came back I saw that in demsg). With a little research, I
know this is a problem other's have had, but I have yet to see a post
to freebsd-current about it. If there is any other information that is
needed, I will do my best to provide it; I'm limited time-wise due to
strenuous course-load, but I promise I'll dedicate some time to it ;)
 
uname -a:

FreeBSD .dynamic.rpi.edu 5.3-BETA2 FreeBSD 5.3-BETA2 #1: Sat Aug 28
21:29:15 UTC 2004    
root at mack.dcsl.buffalo.edu:/usr/obj/usr/src/sys/GENERIC  i386

dmesg:

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA2 #1: Sat Aug 28 21:29:15 UTC 2004
    root at mack.dcsl.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (498.27-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x681  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 268238848 (255 MB)
avail memory = 252846080 (241 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 6 Entries> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem
0x40000000-0x43ffffff at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <TI1450 PCI-CardBus Bridge> mem 0x50103000-0x50103fff irq 11 at
device 2.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1450 PCI-CardBus Bridge> mem 0x50102000-0x50102fff irq 11 at
device 2.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci0: <simple comms> at device 3.0 (no driver attached)
pci0: <multimedia, audio> at device 6.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port
0xfcf0-0xfcff,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on
pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x4000-0x401f
irq 11 at device 7.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piix0: <PIIX Timecounter> port 0xefa0-0xefaf at device 7.3 on pci0
Timecounter "PIIX" frequency 3579545 Hz quality 0
cpu0 on motherboard
orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <IBM3780> can't assign resources (irq)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (port)
ppc1: parallel port not found.
ahc0: No resources alloated.
ahc0: No resources alloated.
ahc0: No resources alloated.
unknown: <PNP0e03> can't assign resources (port)
unknown: <PNP0680> can't assign resources (port)
unknown: <PNP0680> can't assign resources (port)
ahc0: No resources alloated.
Timecounter "TSC" frequency 498274133 Hz quality 800
Timecounters tick every 10.000 msec
cardbus1: Expecting link target, got 0xff
cardbus1: Resource not specified in CIS: id=10, size=100
cardbus1: Resource not specified in CIS: id=14, size=200
rl0: <D-Link DFE-690TXD 10/100BaseTX> port 0x1000-0x10ff mem
0x88000000-0x880001ff irq 11 at device 0.0 on cardbus1
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:40:05:0b:7c:cd
rl0: [GIANT-LOCKED]
ad0: 11509MB <IBM-DARA-212000/AR4IA52A> [24944/15/63] at ata0-master UDMA33
ATAPI_RESET time = 100us
acd0: DVDROM <TOSHIBA DVD-ROM SD-C2302/1617> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
Accounting enabled
rl0: discard oversize frame (ether type 800 flags 3 len 63907 > max 1514)


-- 
David Weinstein


More information about the freebsd-current mailing list