5.3-BETA2 and BETA3 boot problem

[ertank at softhome.net]

Brandon Fosdick wrote: 

> ertank at softhome.net wrote: 
>
>> Hi,
>> I could not find my solution in the list archieves. I could not decide which list to post, so here it goes.
>> I can not boot with very recent sources.
> 
>
> <snip> 
>
> Can you provide details about your hardware? A similar problem keeps popping up for some nforce based boards. 
>
Below is my dmesg output for 5.2-current:
 ---
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
      The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #0: Thu Jul  1 22:40:57 EEST 2004
  root at furby.freebsd.org:/usr/src/sys/i386/compile/OPTIMUM
link_elf: symbol kdb_enter undefined
KLD file acpi.ko - could not finalize loading
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 1.70GHz (1699.96-MHz 686-class CPU)
Origin = "GenuineIntel"  Id = 0xf13  Stepping = 3 

Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA 
,C
MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory  = 234815488 (223 MB)
avail memory = 224321536 (213 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 7 Entries> on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xd0000000-0xd7ffffff at device 
0.0 o
n pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xd000-0xd03f mem 
0xe3000000-0xe30ffff
f,0xe3100000-0xe3100fff irq 11 at device 9.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:0e:0c:33:59:12
fxp0: [GIANT-LOCKED]
pci0: <serial bus, USB> at device 16.0 (no driver attached)
pci0: <serial bus, USB> at device 16.1 (no driver attached)
pci0: <serial bus, USB> at device 16.2 (no driver attached)
pci0: <serial bus, USB> at device 16.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 
0xe000-0xe00f,0x376,0x170-0x177,0x3f
6,0x1f0-0x1f7 at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <multimedia, audio> at device 17.5 (no driver attached)
cpu0 on motherboard
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
Timecounter "TSC" frequency 1699958016 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to 
den
y, logging limited to 10 packets/entry by default
ad0: 39083MB <Maxtor 4D040H2> [79408/16/63] at ata0-master UDMA100
acd0: CDROM <SAMSUNG CD-ROM SC-152A> at ata0-slave PIO4
ad2: 76319MB <WDC WD800JB-00ETA0> [155061/16/63] at ata1-master UDMA100
Mounting root from ufs:/dev/ad0s1a
 ----- 

Also, yesterday I realize that if I remove SMP and apic in my kernel. It is 
just fine. Maybe something wrong with apic, I do not know. Hope this piece 
of information helps... 

My mainboard is not multi-cpu, but I have multi-cpu mainboard at work. I 
intentionally included SMP in my kernel. It is a habbit, except ethernet 
card drivers, and scsi drivers my all kernels are identical. 

 --
Ertan Kucukoglu
ertank at softhome.net