Problem with SiI3114 SATA RAID using 5.3-BETA1-20040823

Harald Schmalzbauer h at schmalzbauer.de
Sun Sep 5 12:50:53 PDT 2004


Am Dienstag, 31. August 2004 23:49 schrieb Kenneth Stailey:
> I'm trying to upgrade a TYAN Tiger K8WS S2875S from FreeBSD-5.2.1-p8 to
> 5.3-BETA1-20040823.
>
> It fails because instead of seeing the SiI3114 as ar0 (RAID-1) it sees two
> separate disks:

I also reported this problem several times for the sil0680 and cmd0649 chips 
on this list. I recently opened a PR (kern/71355). Until this isn't fixed you 
cannot upgrade to 5.3-x

-Harry

>
> ad4: 194481MB <Maxtor 6Y200M0/YAR51HW0> [395136/16/63] at ata2-master
> SATA150 ad6: 194481MB <Maxtor 6Y200M0/YAR51HW0> [395136/16/63] at
> ata3-master SATA150
>
> I don't think I should upgrade just one half of the mirror so I abort the
> upgrade.
>
> When booting 5.2.1-p8
>
> GEOM: create disk ad4 dp=0xffffff003b2f6aa0
> ad4: 194481MB <Maxtor 6Y200M0> [395136/16/63] at ata2-master UDMA100
> GEOM: create disk ad6 dp=0xffffff003b2f62a0
> ad6: 194481MB <Maxtor 6Y200M0> [395136/16/63] at ata3-master UDMA100
> GEOM: create disk ar0 dp=0xffffff0000d7fa70
> ar0: 194480MB <ATA RAID1 array> [24792/255/63] status: READY subdisks:
>  disk0 READY on ad4 at ata2-master
>  disk1 READY on ad6 at ata3-master
> Mounting root from ufs:/dev/ar0s1a
>
> When booting 5.3-BETA1
>
> Copyright (c) 1992-2004 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD 5.3-BETA1-20040823 #0: Mon Aug 23 11:03:37 UTC 2004
>     root at quynh.NUXI.org:/usr/obj/usr/src/sys/GENERIC
> WARNING: WITNESS option enabled, expect reduced performance.
> ACPI APIC Table: <A M I  OEMAPIC >
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: AMD Opteron(tm) Processor 246 (1993.31-MHz K8-class CPU)
>   Origin = "AuthenticAMD"  Id = 0xf58  Stepping = 8
>
> Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA
>,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> AMD
> Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
> real memory  = 1073676288 (1023 MB)
> avail memory = 1020493824 (973 MB)
> MADT: Forcing active-low polarity and level trigger for SCI
> ioapic0 <Version 1.1> irqs 0-23 on motherboard
> acpi0: <A M I OEMXSDT> on motherboard
> acpi0: Power Button (fixed)
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0
> cpu0: <ACPI CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci2: <ACPI PCI bus> on pcib1
> pci2: <display, VGA> at device 0.0 (no driver attached)
> pci2: <display> at device 0.1 (no driver attached)
> pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0
> pci1: <ACPI PCI bus> on pcib2
> ohci0: <OHCI (generic) USB controller> mem 0xff4fc000-0xff4fcfff irq 19 at
> device 0.0 on pci1
> ohci0: [GIANT-LOCKED]
> usb0: OHCI version 1.0, legacy support
> usb0: SMM does not respond, resetting
> usb0: <OHCI (generic) USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 3 ports with 3 removable, self powered
> ohci1: <OHCI (generic) USB controller> mem 0xff4fd000-0xff4fdfff irq 19 at
> device 0.1 on pci1
> ohci1: [GIANT-LOCKED]
> usb1: OHCI version 1.0, legacy support
> usb1: SMM does not respond, resetting
> usb1: <OHCI (generic) USB controller> on ohci1
> usb1: USB revision 1.0
> uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 3 ports with 3 removable, self powered
> em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port
> 0x8880-0x88bf mem 0xff4a0000-0xff4bffff,0xff4c0000-0xff4dffff irq 18 at
> device 3.0 on pci1
> em0: [GIANT-LOCKED]
> em0: Ethernet address: 00:e0:81:28:99:c4
> em0:  Speed:N/A  Duplex:N/A
> atapci0: <SiI 3114 SATA150 controller> port
> 0x9400-0x940f,0x9480-0x9483,0x9800-0x9807,0x9880-0x9883,0x9c00-0x9c07 mem
> 0xff4ffc00-0xff4fffff irq 19 at device 5.0 on pci1
> ata2: channel #0 on atapci0
> ata3: channel #1 on atapci0
> ata4: channel #2 on atapci0
> ata5: channel #3 on atapci0
> fwohci0: <VIA Fire II (VT6306)> port 0x8c00-0x8c7f mem
> 0xff4ff000-0xff4ff7ff irq 17 at device 10.0 on pci1
> fwohci0: [GIANT-LOCKED]
> fwohci0: OHCI version 1.0 (ROM=1)
> fwohci0: No. of Isochronous channels is 4.
> fwohci0: EUI64 00:e0:81:00:00:30:12:53
> fwohci0: Phy 1394a available S400, 2 ports.
> fwohci0: Link S400, max_rec 2048 bytes.
> firewire0: <IEEE1394(FireWire) bus> on fwohci0
> fwe0: <Ethernet over FireWire> on firewire0
> if_fwe0: Fake Ethernet address: 02:e0:81:30:12:53
> fwe0: Ethernet address: 02:e0:81:30:12:53
> sbp0: <SBP-2/SCSI over FireWire> on firewire0
> fwohci0: Initiate bus reset
> fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
> firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
> firewire0: bus manager 0 (me)
> uhci0: <VIA 83C572 USB controller> port 0x9000-0x901f irq 17 at device 11.0
> on pci1
> uhci0: [GIANT-LOCKED]
> usb2: <VIA 83C572 USB controller> on uhci0
> usb2: USB revision 1.0
> uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci1: <VIA 83C572 USB controller> port 0x9080-0x909f irq 18 at device 11.1
> on pci1
> uhci1: [GIANT-LOCKED]
> usb3: <VIA 83C572 USB controller> on uhci1
> usb3: USB revision 1.0
> uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> pci1: <serial bus, USB> at device 11.2 (no driver attached)
> isab0: <PCI-ISA bridge> at device 7.0 on pci0
> isa0: <ISA bus> on isab0
> atapci1: <AMD 8111 UDMA133 controller> port
> 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
> ata0: channel #0 on atapci1
> ata1: channel #1 on atapci1
> pci0: <serial bus, SMBus> at device 7.2 (no driver attached)
> pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
> pci0: <multimedia, audio> at device 7.5 (no driver attached)
> acpi_button0: <Power Button> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model IntelliMouse, device ID 3
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0 port 0x3f8-0x3ff irq 4 on acpi0
> sio0: type 16550A
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> sio1 port 0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on
> acpi0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> ppc0 port 0x378-0x37f irq 7 on acpi0
> ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> orm0: <ISA Option ROMs> at iomem 0xcb000-0xcf7ff,0xc0000-0xcafff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounter "TSC" frequency 1993314155 Hz quality 800
> Timecounters tick every 0.976 msec
> md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xffffffff808e5db0
> acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
> ATAPI_RESET time = 40us
> acd0: CDRW <SONY CD-RW CRX230ED/4YS1> at ata0-master UDMA33
> ad4: 194481MB <Maxtor 6Y200M0/YAR51HW0> [395136/16/63] at ata2-master
> SATA150 ad6: 194481MB <Maxtor 6Y200M0/YAR51HW0> [395136/16/63] at
> ata3-master SATA150 Mounting root from ufs:/dev/md0
> em0: Link is up 100 Mbps Full Duplex
>
> Thanks for any advice as how to upgrade this system.
>
> _______________________________________________
> freebsd-current at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: signature
Url : http://lists.freebsd.org/pipermail/freebsd-current/attachments/20040905/f7cb4b61/attachment.bin


More information about the freebsd-current mailing list