instant reboot when trying to load recent RELENG_5 kernel

Jon Noack noackjr at alumni.rice.edu
Fri Oct 29 13:07:03 PDT 2004


Jon Noack wrote:
> Updated my RELENG_5 machines today and one of them did not survive the
> reboot.  When the loader tries to load the kernel, the machine instantly
> reboots.  I thought it might be due to using CPUTYPE?=athlon-xp in
> /etc/make.conf, but it still happens on a kernel compiled with CPUTYPE
> commented out.  I also tried versions of the loader compiled with and
> without CPUTYPE; both loaders were able to successfully load a kernel
> from 3 days ago but neither of them succeeded with various kernels
> compiled today.

I am still not able to load a new kernel (RELENG_5_3 now) without an
instant reboot.  As soon as I type "load /boot/kernel.new/kernel" from the
boot loader the machine reboots.  Any ideas would be greatly
appreciated...

Jon

> This machine has an Asus A7N266 motherboard and an Athlon XP 1800
> processor.  For a while now it has needed ACPI disabled as it will
> instantly reboot with ACPI enabled.  I was using the latest BIOS (1004)
> but updated the latest beta (1005.005) after this started happening.
> The beta doesn't appear to change anything that I can tell.
>
> The machine also recently developed the annoying habit of not coming
> back up after a reboot.  I have to go power cycle it or press reset.
> This is similar to behavior I've seen on motherboards with dying
> capacitors, but the difference here is that it *always* succeeds when I
> manually power it up/reset it.  Machines with dying capacitors would
> sometimes fail at that time too.
>
> Jon
>
> $ dmesg
> Copyright (c) 1992-2004 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>          The Regents of the University of California. All rights reserved.
> FreeBSD 5.3-BETA7 #4: Tue Oct 12 14:36:37 CDT 2004
>      root at proxy.concordiacrusaders.org:/usr/obj/usr/src/sys/PROXY
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: AMD Athlon(TM) XP 1800+ (1536.83-MHz 686-class CPU)
>    Origin = "AuthenticAMD"  Id = 0x662  Stepping = 2
>
> Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
>    AMD Features=0xc0400000<AMIE,DSP,3DNow!>
> real memory  = 1065271296 (1015 MB)
> avail memory = 1036959744 (988 MB)
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <Host to PCI bridge> pcibus 0 on motherboard
> pir0: <PCI Interrupt Routing Table: 14 Entries> on motherboard
> pci0: <PCI bus> on pcib0
> $PIR: No matching entry for 0.1.INTA
> agp0: <NVIDIA nForce AGP Controller> mem 0xf8000000-0xfbffffff at device
> 0.0 on pci0
> pci0: <memory, RAM> at device 0.1 (no driver attached)
> pci0: <memory, RAM> at device 0.2 (no driver attached)
> pci0: <memory, RAM> at device 0.3 (no driver attached)
> isab0: <PCI-ISA bridge> at device 1.0 on pci0
> isa0: <ISA bus> on isab0
> pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
> pcib1: <PCIBIOS PCI-PCI bridge> at device 8.0 on pci0
> pci1: <PCI bus> on pcib1
> $PIR: No matching entry for 1.10.INTA
> ahc0: <Adaptec 29160N Ultra160 SCSI adapter> port 0xc800-0xc8ff mem
> 0xe5000000-0xe5000fff irq 7 at device 8.0 on pci1
> ahc0: [GIANT-LOCKED]
> aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
> fxp0: <Intel 82550 Pro/100 Ethernet> port 0xc400-0xc43f mem
> 0xe4000000-0xe401ffff,0xe4800000-0xe4800fff irq 5 at device 10.0 on pci1
> miibus0: <MII bus> on fxp0
> inphy0: <i82555 10/100 media interface> on miibus0
> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> fxp0: Ethernet address: 00:02:b3:28:44:a0
> atapci0: <nVidia nForce UDMA100 controller> port
> 0xb800-0xb80f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 9.0 on pci0
> ata0: channel #0 on atapci0
> ata1: channel #1 on atapci0
> pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
> pci2: <PCI bus> on pcib2
> pci2: <display, VGA> at device 0.0 (no driver attached)
> cpu0 on motherboard
> orm0: <ISA Option ROM> at iomem 0xd8000-0xd97ff on isa0
> pmtimer0 on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model IntelliMouse, device ID 3
> fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
> fdc0: [FAST]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> unknown: <PNP0501> can't assign resources (port)
> unknown: <PNP0700> can't assign resources (port)
> unknown: <PNP0f13> can't assign resources (irq)
> ahc1: No resources allocated.
> ahc1: No resources allocated.
> unknown: <PNP0303> can't assign resources (port)
> unknown: <PNP0c02> can't assign resources (port)
> Timecounter "TSC" frequency 1536825688 Hz quality 800
> Timecounters tick every 1.000 msec
> ad0: 78533MB <IC35L080AVVA07-0/VA4OA50K> [159560/16/63] at ata0-master
> UDMA100
> acd0: DVDROM <LITEON DVD-ROM LTD163D/GHR3> at ata1-master UDMA33
> Waiting 15 seconds for SCSI devices to settle
> da0 at ahc0 bus 0 target 0 lun 0
> da0: <QUANTUM ATLAS V  9 SCA 0201> Fixed Direct Access SCSI-3 device
> da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged
> Queueing Enabled
> da0: 8683MB (17783249 512 byte sectors: 255H 63S/T 1106C)
> da1 at ahc0 bus 0 target 1 lun 0
> da1: <QUANTUM ATLAS V  9 SCA 0201> Fixed Direct Access SCSI-3 device
> da1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged
> Queueing Enabled
> da1: 8683MB (17783249 512 byte sectors: 255H 63S/T 1106C)
> Mounting root from ufs:/dev/ad0s1a
> _______________________________________________
> freebsd-current at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"
>
>




More information about the freebsd-current mailing list