FreeBSD 5.3 problem on Dual AMD64 2.1GHz with 8GB RAM
Ganbold
ganbold at micom.mng.net
Tue Oct 26 03:02:44 PDT 2004
Hi,
At 05:15 PM 10/26/2004, you wrote:
>On Tue, Oct 26, 2004 at 03:15:13PM +0900, Ganbold wrote:
> > I still have problem running FreeBSD 5.3 with 8GB RAM on Dual amd64 2.1GHz
> > (IBM @server 325, ServeRAID 6M) with 8GB RAM.
>.
> > CPU: AMD Opteron(tm) Processor 248 (2193.18-MHz K8-class CPU)
>
>BTW, AMD doesn't make 2.1 GHz CPU's. You have a 2.2 GHz CPU.
You are right.
> > It was working ok with 4 GB RAM. Afterwards I added another 4GB RAM and
> > tried to boot FreeBSD
> > with 8GB RAM.
>
>An IBM e325 has only 6 DIMM slots, specifically what RAM configuration
>are you using? Do you have ECC turned on? Are using DRAM scrubbing?
>What is your BIOS memory interleaving settings?
I have 2GB x 4 = 8GB RAM and ECC is turned on and I have following settings
in BIOS:
4GB Memory Hole adjust -> AUTO
DRAM Bank interleave -> AUTO
Node memory interleave -> Disabled
ACPI SRAT table -> Disabled
HPET Timer -> Enabled
ECC -> Enabled
DRAM ECC -> Enabled
ECC Scrub Redirection -> Disabled
Chip-Kill -> Enabled
DCACHE ECC Scrub CTL -> Disabled
L2 ECC Scrub CTL -> Disabled
Dram ECC Scrub CTL -> Disabled
Is there anything wrong in BIOS settings?
thanks,
Ganbold
>--
>-- David (obrien at FreeBSD.org)
>_______________________________________________
>freebsd-current at freebsd.org mailing list
>http://lists.freebsd.org/mailman/listinfo/freebsd-current
>To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"
More information about the freebsd-current
mailing list