5.3b7 and ata raid1 - how?
Rob
robert at irrelevant.com
Wed Oct 20 16:41:41 PDT 2004
Hi Christian, thanks for the reply!
At 18:59 20/10/2004, Christian Hiris wrote:
>On Wednesday 20 October 2004 16:22, Rob wrote:
> > The page from the archive states to use atacontrol to set up the raid. If
> > you check my question again, you will see that I have already tried this,
> > and although after creating ar0 with atacontrol it shows "ready" to
> > `atacontrol status ar0`, after a reboot it has vanished again. There is
> > definitely a lack of persistence in settings from this command now.
>
>Did you run the 'atacontrol create' command from the *5.3* live-filesystem
>cd?
>There were some ataraid enhancements back in June 2004, that broke my sii680
>arrays. So, if you create your array on the sii680 with an older ataraid
>version, it's possible that the actual ataraid version is unable to dedect
>them.
I was using the version as installed by 5.3-BETA7-i386-disc1.iso downloaded
on 3rd October.. I did notice that it didn't spot the array already
present on the drives from a 4.10 test installation, but assumed that was
because of the different versions. My worry is that it doesn't spot a raid
array that it created itself!
>I tried 5.3-BETA7-i386-miniinst.iso as of yesterday and it was able to
>identify the array on the sii680. (What I did, was deleting the ata-raid
>magic-blocks and gave gmirror a try).
I'll download the miniiinst, and see how that fares tomorrow, and will also
read up on gmirror. I've not really delved into pure software raid much,
after scrubbing a couple of discs trying to get vinum going :-) - I'd
bought the 0680 cards initially thinking it was a proper hardware raid, but
it seemed simple enough to get going with atacontrol under 4.10 - I just
didn't expect to get any problems with 5.x when setting up another machine.
Thanks for the suggestions,
Rob.
More information about the freebsd-current
mailing list