vr0: watchdog timeout

Chris O'Brien obrienster at gmail.com
Mon Oct 11 19:22:56 PDT 2004


What's in your rc.conf?  Have you tried hard setting the ethernet port
to 10/half or 100/full?  I have seen this problem in the past with
3Com cards and setting the media and mediaopt paramaters has helped.
-Chris


On Tue, 12 Oct 2004 02:55:01 +0100, Andrew Wiles <adw at jara23.co.uk> wrote:
> I neglected to include a dmesg in my initial report, here it is:
> Copyright (c) 1992-2004 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>        The Regents of the University of California. All rights reserved.
> FreeBSD 5.3-BETA7 #4: Tue Oct  5 03:22:53 BST 2004
>     adw at skynet.asgard.jara23.co.uk:/usr/obj/usr/src/sys/SKYNET.7ZXE
> WARNING: MPSAFE network stack disabled, expect reduced performance.
> MPTable: <VIA      KT133       >
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: AMD Duron(tm) (750.03-MHz 686-class CPU)
>   Origin = "AuthenticAMD"  Id = 0x631  Stepping = 1
> 
> Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
>   AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
> real memory  = 536805376 (511 MB)
> avail memory = 515645440 (491 MB)
> ioapic0: Assuming intbase of 0
> ioapic0 <Version 1.1> irqs 0-23 on motherboard
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <Host to PCI bridge> pcibus 0 on motherboard
> pir0: <PCI Interrupt Routing Table: 11 Entries> on motherboard
> pci0: <PCI bus> on pcib0
> agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem
> 0xe0000000-0xe3ffffff at device 0.0 on pci0
> pcib1: <PCI-PCI bridge> at device 1.0 on pci0
> pci1: <PCI bus> on pcib1
> pci1: <display, VGA> at device 0.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 7.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <VIA 82C686B UDMA100 controller> port
> 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
> atapci0: Correcting VIA config for southbridge data corruption bug
> ata0: channel #0 on atapci0
> ata1: channel #1 on atapci0
> pci0: <serial bus, SMBus> at device 7.4 (no driver attached)
> pcm0: <VIA VT82C686A> port 0xd000-0xd003,0xd400-0xd403,0xd800-0xd8ff irq
> 9 at device 7.5 on pci0
> pcm0: [GIANT-LOCKED]
> pcm0: <Avance Logic ALC200 AC97 Codec>
> ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem
> 0xdfffb000-0xdfffbfff irq 5 at device 10.0 on pci0
> ohci0: [GIANT-LOCKED]
> usb0: OHCI version 1.0, legacy support
> usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem
> 0xdfffc000-0xdfffcfff irq 11 at device 10.1 on pci0
> ohci1: [GIANT-LOCKED]
> usb1: OHCI version 1.0, legacy support
> usb1: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci1
> usb1: USB revision 1.0
> uhub1: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> ugen0: THOMSON Speed Touch 330, rev 1.10/4.00, addr 2
> ohci2: <AcerLabs M5237 (Aladdin-V) USB controller> mem
> 0xdfffd000-0xdfffdfff irq 10 at device 10.2 on pci0
> ohci2: [GIANT-LOCKED]
> usb2: OHCI version 1.0, legacy support
> usb2: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci2
> usb2: USB revision 1.0
> uhub2: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> pci0: <serial bus, USB> at device 10.3 (no driver attached)
> trm0: <Tekram DC395U/UW/F DC315/U Fast20 Wide SCSI Adapter> port
> 0xdc00-0xdcff mem 0xdffff000-0xdfffffff irq 10 at device 13.0 on pci0
> trm0: [GIANT-LOCKED]
> vr0: <VIA VT3043 Rhine I 10/100BaseTX> port 0xcc00-0xcc7f mem
> 0xdfffee80-0xdfffeeff irq 5 at device 15.0 on pci0
> miibus0: <MII bus> on vr0
> amphy0: <Am79C873 10/100 media interface> on miibus0
> amphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> vr0: Ethernet address: 00:50:ba:e3:9b:65
> vr0: [GIANT-LOCKED]
> cpu0 on motherboard
> orm0: <ISA Option ROM> at iomem 0xcb800-0xd37ff on isa0
> pmtimer0 on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model IntelliMouse, device ID 3
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/8 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1 at port 0x2f8-0x2ff irq 3 on isa0
> sio1: type 16550A
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> unknown: <PNP0303> can't assign resources (port)
> unknown: <PNP0501> can't assign resources (port)
> unknown: <PNP0501> can't assign resources (port)
> unknown: <PNP0401> can't assign resources (port)
> unknown: <PNP0f13> can't assign resources (irq)
> Timecounter "TSC" frequency 750032376 Hz quality 800
> Timecounters tick every 10.000 msec
> ipfw2 initialized, divert enabled, rule-based forwarding disabled,
> default to deny, logging unlimited
> acd0: CDROM <GCR-8521B/1.00> at ata0-master PIO4
> afd0: REMOVABLE <LS-120 CSMO 05 UHD Floppy/0512C301> at ata0-slave PIO2
> Waiting 2 seconds for SCSI devices to settle
> da1 at trm0 bus 0 target 1 lun 0
> da1: <QUANTUM ATLAS_V__9_WLS 0230> Fixed Direct Access SCSI-3 device
> da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing
> Enabled
> da1: 8755MB (17930694 512 byte sectors: 255H 63S/T 1116C)
> da0 at trm0 bus 0 target 0 lun 0
> da0: <WDIGTL WDE4360-1807A3 1.80> Fixed Direct Access SCSI-2 device
> da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
> da0: 4095MB (8388314 512 byte sectors: 255H 63S/T 522C)
> Mounting root from ufs:/dev/da0s1a
> 
> Doug White wrote:
> > On Thu, 7 Oct 2004, Andrew Wiles wrote:
> >
> >
> >>After upgrading to BETA7 I've started to get vr0: watchdog timeout
> >>errors during high network load, causing the interface to stop
> >>responding for short (120 seconds or there about) times, resulting in
> >>nfs server not responding errors on client machines.
> >
> >
> > dmesg would have been nice. If you're running UP then try disabling or
> > removing apic.  apic on my Soyo KT400 is broken and it makes other cards
> > flip out with it enabled, although the vr0 works fine.
> >
> 
> --
> This e-mail has been scanned by asgard.jara23.co.uk with ClamAV for known viruses.
> For more infomration on ClamAV see http://www.clamav.net/
> 
> asgard.jara23.co.uk - Building the future on the ashes of the past.
> 
> 
> _______________________________________________
> freebsd-current at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"
>


More information about the freebsd-current mailing list