Problem with PCMCIA ATAPI device

[Alexandre "Sunny" Kovalenko]

I have SanDisk CF to PCMCIA adapter with 512Mb piece of CF in it. It
used to work with -CURRENT as of late EST on September 29. After cvsup
this morning (EST, October 7), not only appropriate device is not
created for the card, but no further insertion/removal of any other
PCMCIA or CardBus card makes any impression on the system until reboot.

I have posted what I thought relevant differences between dmesg output
below and attached full messages to this E-mail. Please,let me know if I
any additional information is needed.

----- System of 9/29 -- device is working
pccard0: Allocation failed for cfe 0
ata2: <CF Card CFA 512MB CRR> at port 0x100-0x10f irq 10 function 0
config 1 on pccard0
ad4: FAILURE - SETFEATURES ENABLE RCACHE status=51<READY,DSC,ERROR>
error=4<ABORTED>
ad4: FAILURE - SETFEATURES ENABLE WCACHE status=51<READY,DSC,ERROR>
error=4<ABORTED>
ad4: 488MB <512MB CRR/Rev 2.00> [993/16/63] at ata2-master PIO4
ad4: WARNING - removed from configuration
pccard0: Allocated resource not found, 4 1 100 10
ata2: detached

----- System of 10/7 -- device is not working
pccard0: Allocation failed for cfe 0
ata2: <CF Card CFA 512MB CRR> at port 0x100-0x10f irq 10 function 0
config 1 on pccard0

---
Alexandre "Sunny" Kovalenko.