5.3-BETA7 crash ata_atapicmd

John Birrell jb at cimlogic.com.au
Tue Oct 5 00:00:43 PDT 2004


On Tue, Oct 05, 2004 at 08:39:01AM +0200, S?ren Schmidt wrote:
> Please get me the output from a verbose boot on beta6 and as far as it 
> gets on beta7, so we can get that one fixed, thanks..

The verbose boot of BETA7 succeeded this time for whatever reason. The kernel
hasn't changed since the last message I posted. Perhaps the behaviour changes
with -v.

The BETA6 still has phk's fdc debug code which should explain the few extra
lines in the diff between the two boots.

----------------------------------------------------------------------------------
/boot/kernel/acpi.ko text=0x3f9f8 data=0x1be4+0x110c syms=[0x4+0x72a0+0x4+0x9743]
GDB: debug ports: sio
GDB: current port: sio
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
SMAP type=01 base=0000000000000000 len=00000000000a0000
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=02 base=00000000fec00000 len=0000000001400000
SMAP type=01 base=0000000000100000 len=000000000f6f0000
SMAP type=03 base=000000000f7f3000 len=000000000000d000
SMAP type=04 base=000000000f7f0000 len=0000000000003000
SMAP type=02 base=000000000f800000 len=0000000000800000
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA7 #3: Tue Oct  5 08:41:17 EST 2004
    jb at freebsd3.cimlogic.com.au:/usr/obj/usr/src/sys/FREEBSD3
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0742000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0742200.
Calibrating clock(s) ... i8254 clock: 1193246 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1102505475 Hz
CPU: Intel(R) Celeron(TM) CPU                1100MHz (1102.51-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 259981312 (247 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000826000 - 0x000000000f363fff, 246669312 bytes (60222 pages)
avail memory = 249053184 (237 MB)
bios32: Found BIOS32 Service Directory header at 0xc00faed0
bios32: Entry = 0xfb340 (c00fb340)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb370
pnpbios: Found PnP BIOS data at 0xc00fbe20
pnpbios: Entry = f0000:be50  Rev = 1.0
Other BIOS signatures found:
io: <I/O>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
mem: <memory>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <GBT AWRDACPI> on motherboard
acpi0: [MPSAFE]
pci_open(1):    mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=060000] [hdr=00] is there (id=06011106)
pcibios: BIOS version 2.10
Found $PIR table, 6 entries at 0xc00fdd40
PCI-Only Interrupts: 5 10 11 12
Location  Bus Device Pin  Link  IRQs
slot 1      0    9    A   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 1      0    9    B   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 1      0    9    C   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 1      0    9    D   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 2      0   10    A   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 2      0   10    B   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 2      0   10    C   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 2      0   10    D   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 3      0   11    A   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 3      0   11    B   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 3      0   11    C   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 3      0   11    D   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 4      0   13    A   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 4      0   13    B   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 4      0   13    C   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 4      0   13    D   0x01  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    A   0x01  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    B   0x02  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    C   0x03  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    D   0x05  3 4 5 6 7 9 10 11 12 14 15
embedded    0    7    C   0x03  3 4 5 6 7 9 10 11 12 14 15
embedded    0    7    D   0x05  3 4 5 6 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: Power Button (fixed)
ACPI timer looks GOOD min = 1, max = 3, width = 2
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
unknown: not probed (disabled)
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
\_SB_.PCI0.LNKB irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 0.9.0
\_SB_.PCI0.LNKC irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 12+ low,level,sharable 0.9.1
\_SB_.PCI0.LNKD irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  5+ low,level,sharable 0.9.2
\_SB_.PCI0.LNKA irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 10+ low,level,sharable 0.9.3
\_SB_.PCI0.LNKC irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 12+ low,level,sharable 0.10.0
\_SB_.PCI0.LNKD irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  5+ low,level,sharable 0.10.1
\_SB_.PCI0.LNKA irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 10+ low,level,sharable 0.10.2
\_SB_.PCI0.LNKB irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 0.10.3
\_SB_.PCI0.LNKD irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  5+ low,level,sharable 0.11.0
\_SB_.PCI0.LNKA irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 10+ low,level,sharable 0.11.1
\_SB_.PCI0.LNKB irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 0.11.2
\_SB_.PCI0.LNKC irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 12+ low,level,sharable 0.11.3
\_SB_.PCI0.LNKB irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 0.13.0
\_SB_.PCI0.LNKC irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 12+ low,level,sharable 0.13.1
\_SB_.PCI0.LNKD irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  5+ low,level,sharable 0.13.2
\_SB_.PCI0.LNKA irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 10+ low,level,sharable 0.13.3
\_SB_.PCI0.LNKA irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 10+ low,level,sharable 0.7.0
\_SB_.PCI0.LNKB irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 0.7.1
\_SB_.PCI0.LNKC irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 12+ low,level,sharable 0.7.2
\_SB_.PCI0.LNKD irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  5+ low,level,sharable 0.7.3
\_SB_.PCI0.LNKA irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 10+ low,level,sharable 0.1.0
\_SB_.PCI0.LNKB irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 0.1.1
\_SB_.PCI0.LNKC irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 12+ low,level,sharable 0.1.2
\_SB_.PCI0.LNKD irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  5+ low,level,sharable 0.1.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
        map[10]: type 3, range 32, base e0000000, size 26, enabled
found-> vendor=0x1106, dev=0x0601, revid=0x05
        bus=0, slot=0, func=0
        class=06-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0006, statreg=0x2290, cachelnsz=0 (dwords)
        lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x8601, revid=0x00
        bus=0, slot=1, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0007, statreg=0xa230, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x0686, revid=0x40
        bus=0, slot=7, func=0
        class=06-01-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        powerspec 2  supports D0 D3  current D0
        map[20]: type 4, range 32, base 0000c000, size  4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x06
        bus=0, slot=7, func=1
        class=01-01-8a, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        powerspec 2  supports D0 D3  current D0
        map[20]: type 4, range 32, base 0000c400, size  5, enabled
pcib0: matched entry for 0.7.INTD (src \_SB_.PCI0.LNKD)
pcib0: possible interrupts:  1  3  4  5  6  7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\_SB_.PCI0.LNKB (references 6, priority 124194):
        interrupts:         11    10     5    12     7     6     4     3    15    14     1
        penalty:           240   240   290  5240  5240  5240  5240  5240 50240 50240100240
\_SB_.PCI0.LNKC (references 6, priority 124194):
        interrupts:         11    10     5    12     7     6     4     3    15    14     1
        penalty:           240   240   290  5240  5240  5240  5240  5240 50240 50240100240
\_SB_.PCI0.LNKD (references 6, priority 124194):
        interrupts:         11    10     5    12     7     6     4     3    15    14     1
        penalty:           240   240   290  5240  5240  5240  5240  5240 50240 50240100240
\_SB_.PCI0.LNKA (references 6, priority 124194):
        interrupts:         11    10     5    12     7     6     4     3    15    14     1
        penalty:           240   240   290  5240  5240  5240  5240  5240 50240 50240100240
pcib0: slot 7 INTD routed to irq 5 via \_SB_.PCI0.LNKD
found-> vendor=0x1106, dev=0x3038, revid=0x1a
        bus=0, slot=7, func=2
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=d, irq=5
        powerspec 2  supports D0 D3  current D0
        map[20]: type 4, range 32, base 0000c800, size  5, enabled
pcib0: matched entry for 0.7.INTD (src \_SB_.PCI0.LNKD)
pcib0: slot 7 INTD is already routed to irq 5
found-> vendor=0x1106, dev=0x3038, revid=0x1a
        bus=0, slot=7, func=3
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=d, irq=5
        powerspec 2  supports D0 D3  current D0
found-> vendor=0x1106, dev=0x3057, revid=0x40
        bus=0, slot=7, func=4
        class=06-80-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        powerspec 2  supports D0 D3  current D0
        map[10]: type 4, range 32, base 0000cc00, size  8, enabled
        map[14]: type 4, range 32, base 0000d000, size  2, enabled
        map[18]: type 4, range 32, base 0000d400, size  2, enabled
pcib0: matched entry for 0.7.INTC (src \_SB_.PCI0.LNKC)
pcib0: possible interrupts:  1  3  4  5  6  7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\_SB_.PCI0.LNKB (references 6, priority 125667):
        interrupts:         11    10     5    12     7     6     4     3    15    14     1
        penalty:           480   480   590  5480  5480  5480  5480  5480 50480 50480100480
\_SB_.PCI0.LNKC (references 6, priority 125667):
        interrupts:         11    10     5    12     7     6     4     3    15    14     1
        penalty:           480   480   590  5480  5480  5480  5480  5480 50480 50480100480
\_SB_.PCI0.LNKA (references 6, priority 125667):
        interrupts:         11    10     5    12     7     6     4     3    15    14     1
        penalty:           480   480   590  5480  5480  5480  5480  5480 50480 50480100480
pcib0: slot 7 INTC routed to irq 12 via \_SB_.PCI0.LNKC
found-> vendor=0x1106, dev=0x3058, revid=0x50
        bus=0, slot=7, func=5
        class=04-01-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=c, irq=12
        powerspec 2  supports D0 D3  current D0
        map[10]: type 4, range 32, base 0000dc00, size  8, enabled
        map[14]: type 1, range 32, base e7000000, size  8, enabled
pcib0: matched entry for 0.9.INTA (src \_SB_.PCI0.LNKB)
pcib0: possible interrupts:  1  3  4  5  6  7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\_SB_.PCI0.LNKB (references 6, priority 127140):
        interrupts:         11    10     5     7     6     4     3    12    15    14     1
        penalty:           720   720   830  5720  5720  5720  5720  5780 50720 50720100720
\_SB_.PCI0.LNKA (references 6, priority 127140):
        interrupts:         11    10     5     7     6     4     3    12    15    14     1
        penalty:           720   720   830  5720  5720  5720  5720  5780 50720 50720100720
pcib0: slot 9 INTA routed to irq 11 via \_SB_.PCI0.LNKB
found-> vendor=0x10ec, dev=0x8139, revid=0x10
        bus=0, slot=9, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type 4, range 32, base 0000e000, size  8, enabled
        map[14]: type 1, range 32, base e7001000, size  8, enabled
pcib0: matched entry for 0.13.INTA (src \_SB_.PCI0.LNKB)
pcib0: slot 13 INTA is already routed to irq 11
found-> vendor=0x10ec, dev=0x8139, revid=0x10
        bus=0, slot=13, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D1 D2 D3  current D0
agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe0000000
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xe4000000-0xe6ffffff
pcib1:   prefetched decode 0xfff00000-0xfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
        map[10]: type 1, range 32, base e5800000, size 23, enabled
pcib1: device (null) requested decoded memory range 0xe5800000-0xe5ffffff
        map[14]: type 1, range 32, base e6000000, size 17, enabled
pcib1: device (null) requested decoded memory range 0xe6000000-0xe601ffff
        map[18]: type 1, range 32, base e5000000, size 23, enabled
pcib1: device (null) requested decoded memory range 0xe5000000-0xe57fffff
pcib0: matched entry for 0.1.INTA (src \_SB_.PCI0.LNKA)
pcib0: possible interrupts:  1  3  4  5  6  7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\_SB_.PCI0.LNKA (references 6, priority 128612):
        interrupts:         10    11     5     7     6     4     3    12    15    14     1
        penalty:           960  1020  1070  5960  5960  5960  5960  6020 50960 50960100960
pcib0: slot 1 INTA routed to irq 10 via \_SB_.PCI0.LNKA
pcib1: slot 0 INTA is routed to irq 10
found-> vendor=0x1023, dev=0x8500, revid=0x6a
        bus=1, slot=0, func=0
        class=03-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 1  supports D0 D1 D2 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port 0xc000-0xc00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc000
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave:  stat=0x00 err=0x00 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 7.2 (no driver attached)
pci0: <serial bus, USB> at device 7.3 (no driver attached)
pci0: <bridge, PCI-unknown> at device 7.4 (no driver attached)
pci0: <multimedia, audio> at device 7.5 (no driver attached)
rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xdc00
rl0: <RealTek 8139 10/100BaseTX> port 0xdc00-0xdcff mem 0xe7000000-0xe70000ff irq 11 at device 9.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:02:44:2c:61:b7
rl0: [MPSAFE]
rl1: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe000
rl1: <RealTek 8139 10/100BaseTX> port 0xe000-0xe0ff mem 0xe7001000-0xe70010ff irq 11 at device 13.0 on pci0
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: bpf attached
rl1: Ethernet address: 00:20:ed:34:42:d9
rl1: [MPSAFE]
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1102505475 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
ipfw2 initialized, divert disabled, rule-based forwarding disabled, default to deny, logging unlimited
ata0-master: pio=0x0c wdma=0x22 udma=0x44 cable=40pin
ata0-master: setting PIO4 on VIA 82C686B chip
ata0-master: DMA limited to UDMA33, non-ATA66 cable or device
ata0-master: setting UDMA33 on VIA 82C686B chip
ad0: <QUANTUM FIREBALL CR8.4A/A5U.1200> ATA-4 disk at ata0-master
ad0: 8063MB (16514064 sectors), 16383 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ata1-master: pio=0x0b wdma=0x21 udma=0xffffffff cable=40pin
ata1-master: setting PIO3 on VIA 82C686B chip
acd0: <WEARNES CDD-1020/B1.0> CDROM drive at ata1 as master
acd0:  PIO3
acd0: Reads:
acd0: Writes:
acd0: Mechanism: caddy
acd0: Medium: no/blank disc
GEOM: new disk ad0
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:16514001
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 8455168512 end 8455200767
GEOM: Configure ad0s1a, start 536870912 length 7918297600 end 8455168511
GEOM: Configure ad0s1b, start 0 length 536870912 end 536870911
GEOM: Configure ad0s1c, start 0 length 8455168512 end 8455168511
Mounting root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
Pre-seeding PRNG: kickstart.
Loading configuration files.
Entropy harvesting: interrupts ethernet point_to_point kickstart.
swapon: adding /dev/ad0s1b as swap device
Starting file system checks:
/dev/ad0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1a: clean, 2624630 free (28470 frags, 324520 blocks, 0.4% fragmentation)
kern.sugid_coredump: 0 -> 1
Setting hostname: freebsd3.cimlogic.com.au.
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=8<VLAN_MTU>
        inet 10.1.1.3 netmask 0xffffff00 broadcast 10.1.1.255
        ether 00:02:44:2c:61:b7
        media: Ethernet autoselect (none)
        status: no carrier
rl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=8<VLAN_MTU>
        inet 10.1.2.3 netmask 0xffffff00 broadcast 10.1.2.255
        ether 00:20:ed:34:42:d9
        media: Ethernet 10baseT/UTP <full-duplex>
        status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet 127.0.0.1 netmask 0xff000000 
Flushed all rules.
----------------------------------------------------------------------------------
/boot/kernel.good/acpi.ko text=0x3f978 data=0x1be4+0x110c syms=[0x4+0x72a0+0x4+0x9743]
OK boot -v
SMAP type=01 base=0000000000000000 len=00000000000a0000
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=02 base=00000000fec00000 len=0000000001400000
SMAP type=01 base=0000000000100000 len=000000000f6f0000
SMAP type=03 base=000000000f7f3000 len=000000000000d000
SMAP type=04 base=000000000f7f0000 len=0000000000003000
SMAP type=02 base=000000000f800000 len=0000000000800000
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA6 #10: Thu Sep 30 10:40:41 EST 2004
    jb at freebsd3.cimlogic.com.au:/usr/obj/usr/src/sys/FREEBSD3
Preloaded elf kernel "/boot/kernel.good/kernel" at 0xc072c000.
Preloaded elf module "/boot/kernel.good/acpi.ko" at 0xc072c208.
Calibrating clock(s) ... i8254 clock: 1193243 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1102505371 Hz
CPU: Intel(R) Celeron(TM) CPU                1100MHz (1102.51-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 259981312 (247 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000826000 - 0x000000000f363fff, 246669312 bytes (60222 pages)
avail memory = 249053184 (237 MB)
bios32: Found BIOS32 Service Directory header at 0xc00faed0
bios32: Entry = 0xfb340 (c00fb340)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb370
pnpbios: Found PnP BIOS data at 0xc00fbe20
pnpbios: Entry = f0000:be50  Rev = 1.0
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <GBT AWRDACPI> on motherboard
acpi0: [MPSAFE]
pci_open(1):    mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=060000] [hdr=00] is there (id=06011106)
pcibios: BIOS version 2.10
Found $PIR table, 6 entries at 0xc00fdd40
PCI-Only Interrupts: 5 10 11 12
Location  Bus Device Pin  Link  IRQs
slot 1      0    9    A   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 1      0    9    B   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 1      0    9    C   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 1      0    9    D   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 2      0   10    A   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 2      0   10    B   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 2      0   10    C   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 2      0   10    D   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 3      0   11    A   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 3      0   11    B   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 3      0   11    C   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 3      0   11    D   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 4      0   13    A   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 4      0   13    B   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 4      0   13    C   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 4      0   13    D   0x01  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    A   0x01  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    B   0x02  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    C   0x03  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    D   0x05  3 4 5 6 7 9 10 11 12 14 15
embedded    0    7    C   0x03  3 4 5 6 7 9 10 11 12 14 15
embedded    0    7    D   0x05  3 4 5 6 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: Power Button (fixed)
ACPI timer looks GOOD min = 1, max = 3, width = 2
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
unknown: not probed (disabled)
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
\_SB_.PCI0.LNKB irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 0.9.0
\_SB_.PCI0.LNKC irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 12+ low,level,sharable 0.9.1
\_SB_.PCI0.LNKD irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  5+ low,level,sharable 0.9.2
\_SB_.PCI0.LNKA irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 10+ low,level,sharable 0.9.3
\_SB_.PCI0.LNKC irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 12+ low,level,sharable 0.10.0
\_SB_.PCI0.LNKD irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  5+ low,level,sharable 0.10.1
\_SB_.PCI0.LNKA irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 10+ low,level,sharable 0.10.2
\_SB_.PCI0.LNKB irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 0.10.3
\_SB_.PCI0.LNKD irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  5+ low,level,sharable 0.11.0
\_SB_.PCI0.LNKA irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 10+ low,level,sharable 0.11.1
\_SB_.PCI0.LNKB irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 0.11.2
\_SB_.PCI0.LNKC irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 12+ low,level,sharable 0.11.3
\_SB_.PCI0.LNKB irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 0.13.0
\_SB_.PCI0.LNKC irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 12+ low,level,sharable 0.13.1
\_SB_.PCI0.LNKD irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  5+ low,level,sharable 0.13.2
\_SB_.PCI0.LNKA irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 10+ low,level,sharable 0.13.3
\_SB_.PCI0.LNKA irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 10+ low,level,sharable 0.7.0
\_SB_.PCI0.LNKB irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 0.7.1
\_SB_.PCI0.LNKC irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 12+ low,level,sharable 0.7.2
\_SB_.PCI0.LNKD irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  5+ low,level,sharable 0.7.3
\_SB_.PCI0.LNKA irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 10+ low,level,sharable 0.1.0
\_SB_.PCI0.LNKB irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 0.1.1
\_SB_.PCI0.LNKC irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 12+ low,level,sharable 0.1.2
\_SB_.PCI0.LNKD irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  5+ low,level,sharable 0.1.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
        map[10]: type 3, range 32, base e0000000, size 26, enabled
found-> vendor=0x1106, dev=0x0601, revid=0x05
        bus=0, slot=0, func=0
        class=06-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0006, statreg=0x2290, cachelnsz=0 (dwords)
        lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x8601, revid=0x00
        bus=0, slot=1, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0007, statreg=0xa230, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x0686, revid=0x40
        bus=0, slot=7, func=0
        class=06-01-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        powerspec 2  supports D0 D3  current D0
        map[20]: type 4, range 32, base 0000c000, size  4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x06
        bus=0, slot=7, func=1
        class=01-01-8a, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        powerspec 2  supports D0 D3  current D0
        map[20]: type 4, range 32, base 0000c400, size  5, enabled
pcib0: matched entry for 0.7.INTD (src \_SB_.PCI0.LNKD)
pcib0: possible interrupts:  1  3  4  5  6  7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\_SB_.PCI0.LNKB (references 6, priority 124194):
        interrupts:         11    10     5    12     7     6     4     3    15    14     1
        penalty:           240   240   290  5240  5240  5240  5240  5240 50240 50240100240
\_SB_.PCI0.LNKC (references 6, priority 124194):
        interrupts:         11    10     5    12     7     6     4     3    15    14     1
        penalty:           240   240   290  5240  5240  5240  5240  5240 50240 50240100240
\_SB_.PCI0.LNKD (references 6, priority 124194):
        interrupts:         11    10     5    12     7     6     4     3    15    14     1
        penalty:           240   240   290  5240  5240  5240  5240  5240 50240 50240100240
\_SB_.PCI0.LNKA (references 6, priority 124194):
        interrupts:         11    10     5    12     7     6     4     3    15    14     1
        penalty:           240   240   290  5240  5240  5240  5240  5240 50240 50240100240
pcib0: slot 7 INTD routed to irq 5 via \_SB_.PCI0.LNKD
found-> vendor=0x1106, dev=0x3038, revid=0x1a
        bus=0, slot=7, func=2
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=d, irq=5
        powerspec 2  supports D0 D3  current D0
        map[20]: type 4, range 32, base 0000c800, size  5, enabled
pcib0: matched entry for 0.7.INTD (src \_SB_.PCI0.LNKD)
pcib0: slot 7 INTD is already routed to irq 5
found-> vendor=0x1106, dev=0x3038, revid=0x1a
        bus=0, slot=7, func=3
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=d, irq=5
        powerspec 2  supports D0 D3  current D0
found-> vendor=0x1106, dev=0x3057, revid=0x40
        bus=0, slot=7, func=4
        class=06-80-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        powerspec 2  supports D0 D3  current D0
        map[10]: type 4, range 32, base 0000cc00, size  8, enabled
        map[14]: type 4, range 32, base 0000d000, size  2, enabled
        map[18]: type 4, range 32, base 0000d400, size  2, enabled
pcib0: matched entry for 0.7.INTC (src \_SB_.PCI0.LNKC)
pcib0: possible interrupts:  1  3  4  5  6  7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\_SB_.PCI0.LNKB (references 6, priority 125667):
        interrupts:         11    10     5    12     7     6     4     3    15    14     1
        penalty:           480   480   590  5480  5480  5480  5480  5480 50480 50480100480
\_SB_.PCI0.LNKC (references 6, priority 125667):
        interrupts:         11    10     5    12     7     6     4     3    15    14     1
        penalty:           480   480   590  5480  5480  5480  5480  5480 50480 50480100480
\_SB_.PCI0.LNKA (references 6, priority 125667):
        interrupts:         11    10     5    12     7     6     4     3    15    14     1
        penalty:           480   480   590  5480  5480  5480  5480  5480 50480 50480100480
pcib0: slot 7 INTC routed to irq 12 via \_SB_.PCI0.LNKC
found-> vendor=0x1106, dev=0x3058, revid=0x50
        bus=0, slot=7, func=5
        class=04-01-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=c, irq=12
        powerspec 2  supports D0 D3  current D0
        map[10]: type 4, range 32, base 0000dc00, size  8, enabled
        map[14]: type 1, range 32, base e7000000, size  8, enabled
pcib0: matched entry for 0.9.INTA (src \_SB_.PCI0.LNKB)
pcib0: possible interrupts:  1  3  4  5  6  7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\_SB_.PCI0.LNKB (references 6, priority 127140):
        interrupts:         11    10     5     7     6     4     3    12    15    14     1
        penalty:           720   720   830  5720  5720  5720  5720  5780 50720 50720100720
\_SB_.PCI0.LNKA (references 6, priority 127140):
        interrupts:         11    10     5     7     6     4     3    12    15    14     1
        penalty:           720   720   830  5720  5720  5720  5720  5780 50720 50720100720
pcib0: slot 9 INTA routed to irq 11 via \_SB_.PCI0.LNKB
found-> vendor=0x10ec, dev=0x8139, revid=0x10
        bus=0, slot=9, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type 4, range 32, base 0000e000, size  8, enabled
        map[14]: type 1, range 32, base e7001000, size  8, enabled
pcib0: matched entry for 0.13.INTA (src \_SB_.PCI0.LNKB)
pcib0: slot 13 INTA is already routed to irq 11
found-> vendor=0x10ec, dev=0x8139, revid=0x10
        bus=0, slot=13, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D1 D2 D3  current D0
agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe0000000
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xe4000000-0xe6ffffff
pcib1:   prefetched decode 0xfff00000-0xfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
        map[10]: type 1, range 32, base e5800000, size 23, enabled
pcib1: device (null) requested decoded memory range 0xe5800000-0xe5ffffff
        map[14]: type 1, range 32, base e6000000, size 17, enabled
pcib1: device (null) requested decoded memory range 0xe6000000-0xe601ffff
        map[18]: type 1, range 32, base e5000000, size 23, enabled
pcib1: device (null) requested decoded memory range 0xe5000000-0xe57fffff
pcib0: matched entry for 0.1.INTA (src \_SB_.PCI0.LNKA)
pcib0: possible interrupts:  1  3  4  5  6  7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\_SB_.PCI0.LNKA (references 6, priority 128612):
        interrupts:         10    11     5     7     6     4     3    12    15    14     1
        penalty:           960  1020  1070  5960  5960  5960  5960  6020 50960 50960100960
pcib0: slot 1 INTA routed to irq 10 via \_SB_.PCI0.LNKA
pcib1: slot 0 INTA is routed to irq 10
found-> vendor=0x1023, dev=0x8500, revid=0x6a
        bus=1, slot=0, func=0
        class=03-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 1  supports D0 D1 D2 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port 0xc000-0xc00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc000
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave:  stat=0x00 err=0x00 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 7.2 (no driver attached)
pci0: <serial bus, USB> at device 7.3 (no driver attached)
pci0: <bridge, PCI-unknown> at device 7.4 (no driver attached)
pci0: <multimedia, audio> at device 7.5 (no driver attached)
rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xdc00
rl0: <RealTek 8139 10/100BaseTX> port 0xdc00-0xdcff mem 0xe7000000-0xe70000ff irq 11 at device 9.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:02:44:2c:61:b7
rl0: [MPSAFE]
rl1: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe000
rl1: <RealTek 8139 10/100BaseTX> port 0xe000-0xe0ff mem 0xe7001000-0xe70010ff irq 11 at device 13.0 on pci0
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: bpf attached
rl1: Ethernet address: 00:20:ed:34:42:d9
rl1: [MPSAFE]
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
Contents of fdc_data at start of fdc_attach:
  portt=0x0   porth=0x3f0   stst=0x0   stsh=0x3f0
  ctlt=0x0    ctlh=0x3f7
  port_off=0x0    ctl_off=0x0    sts_off=0x0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1102505371 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
ipfw2 initialized, divert disabled, rule-based forwarding disabled, default to deny, logging unlimited
ata0-master: pio=0x0c wdma=0x22 udma=0x44 cable=40pin
ata0-master: setting PIO4 on VIA 82C686B chip
ata0-master: DMA limited to UDMA33, non-ATA66 cable or device
ata0-master: setting UDMA33 on VIA 82C686B chip
ad0: <QUANTUM FIREBALL CR8.4A/A5U.1200> ATA-4 disk at ata0-master
ad0: 8063MB (16514064 sectors), 16383 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ata1-master: pio=0x0b wdma=0x21 udma=0xffffffff cable=40pin
ATAPI_RESET time = 130us
ata1-master: setting PIO3 on VIA 82C686B chip
acd0: <WEARNES CDD-1020/B1.0> CDROM drive at ata1 as master
acd0:  PIO3
acd0: Reads:
acd0: Writes:
acd0: Mechanism: caddy
acd0: Medium: no/blank disc
New disk in probe
Got disk in probe
fd0: autoselection failed
GEOM: new disk ad0
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:16514001
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 8455168512 end 8455200767
GEOM: Configure ad0s1a, start 536870912 length 7918297600 end 8455168511
GEOM: Configure ad0s1b, start 0 length 536870912 end 536870911
GEOM: Configure ad0s1c, start 0 length 8455168512 end 8455168511
Mounting root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
Pre-seeding PRNG: kickstart.
Loading configuration files.
Entropy harvesting: interrupts ethernet point_to_point kickstart.
swapon: adding /dev/ad0s1b as swap device
Starting file system checks:
/dev/ad0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1a: clean, 2624567 free (28471 frags, 324512 blocks, 0.4% fragmentation)
kern.sugid_coredump: 0 -> 1
Setting hostname: freebsd3.cimlogic.com.au.
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=8<VLAN_MTU>
        inet 10.1.1.3 netmask 0xffffff00 broadcast 10.1.1.255
        ether 00:02:44:2c:61:b7
        media: Ethernet autoselect (none)
        status: no carrier
rl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=8<VLAN_MTU>
        inet 10.1.2.3 netmask 0xffffff00 broadcast 10.1.2.255
        ether 00:20:ed:34:42:d9
        media: Ethernet 10baseT/UTP <full-duplex>
        status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet 127.0.0.1 netmask 0xff000000 
Flushed all rules.
-------------------------------------------------------------------------------------------


-- 
John Birrell


More information about the freebsd-current mailing list