ssh & select() problem on 5.3

[Claudiu Dragalia-Paraipan]

Peter Jeremy wrote:
> On Sun, 2004-Nov-28 18:43:47 +0200, Claudiu Dragalia-Paraipan wrote:
> 
>>Since the problem occurs only when I connect to the firewall or to a 
>>server behind it, I started to suspect a hardware failure. Could a 
>>network card cause such problems ?
> 
> 
> A couple of people have mentioned path-MTU problems.  I've also bumped
> into this problem when playing with VLANs where one end of the VLAN
> trunk doesn't support long frames - an oversize packet will get ignored
> by the receiver without any error being returned.
> 

It seems that packets of size more then 1478 are dropped somewhere, but 
not on the FreeBSD Firewall. The problem seems to be that it never 
receives a ICMP "fragmentation needed but DF set".
Unfortunately I have control only over the firewall and what's behind it.
Next after the firewall (towards internet) there are a switch and a 
Cisco router. I asked about the settings of this two, and it seems that 
the switch is used for VLANs, and the Cisco for making a tunnel over 
fiber channel with the next hop.
I have too few information about this at the moment, but I am almost 
certain that the problems are occuring because of the Cisco router.
I did a traceroute from the firewall to outside, and big packets always 
stop on Cisco router.
A traceroute from outside to the firewall always stops at the hop 
exactly before the cisco router I am talking about, which I suppose is 
the other end of this tunnel.




-- 
Claudiu Dragalina-Paraipan
dr.clau at gmail.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 254 bytes
Desc: OpenPGP digital signature
Url : http://lists.freebsd.org/pipermail/freebsd-current/attachments/20041129/46cec31e/signature.bin