ad2: FAILURE - READ_DMA status=51<READY,DSC,ERROR>
error=84<ICRC,ABORTED> LBA=0
Søren Schmidt
sos at DeepCore.dk
Mon May 17 11:04:01 PDT 2004
Edwin Culp wrote:
> I'm running current as of yesterday. I connected an older
> current disk [probably 6 months] that has some important
> information. I thought that it would be trivial to mount it and
> copy the info to my current disk. I tried and am getting:
>
> ad2: 29311MB <Maxtor 53073U6> [59554/16/63] at ata1-master UDMA66
> ad2: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
> ad2: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
> ad2: FAILURE - READ_DMA status=51<READY,DSC,ERROR>
> error=84<ICRC,ABORTED> LBA=0
> ad2: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
> ad2: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
> ad2: FAILURE - READ_DMA status=51<READY,DSC,ERROR>
> error=84<ICRC,ABORTED> LBA=0
>
> Could this be caused by changes in current, a configuration issue
> that I'm missing or is it a probable hardware failure?
Check you cabling, this could be the result of bad cable/connector, or
that you havn't used a proper 80 conductor version.
If that also fails use atacontrol to backpedal to ATA33 see if that
helps any...
--
-Søren
More information about the freebsd-current
mailing list