FAILURE - READ_DMA status=51<READY,DSC,ERROR>error=84<ICRC,ABORTED> LBA=0

[jesse marquez]

You might want to reseat the cabling on the hard drive, make sure pins are
okay as well. Looks like the drive is dying though.

over and out,
.jesse
----- Original Message ----- 
From: "Edwin Culp" <eculp at encontacto.net>
To: <current at freebsd.org>
Sent: Monday, May 17, 2004 12:38 PM
Subject: ad2: FAILURE - READ_DMA
status=51<READY,DSC,ERROR>error=84<ICRC,ABORTED> LBA=0


> I'm running current as of yesterday.  I connected an older
> current disk [probably 6 months] that has some important
> information.  I thought that it would be trivial to mount it and
> copy the info to my current disk.  I tried and am getting:
>
> ad2: 29311MB <Maxtor 53073U6> [59554/16/63] at ata1-master UDMA66
> ad2: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
> ad2: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
> ad2: FAILURE - READ_DMA status=51<READY,DSC,ERROR>
> error=84<ICRC,ABORTED> LBA=0
> ad2: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
> ad2: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
> ad2: FAILURE - READ_DMA status=51<READY,DSC,ERROR>
> error=84<ICRC,ABORTED> LBA=0
>
> Could this be caused by changes in current, a configuration issue
> that I'm missing or is it a probable hardware failure?
>
> Thanks for any suggestions,
>
> ed
> _______________________________________________
> freebsd-current at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"