FreeBSD/Current: As of 2004/05/08 at 11:00am EST - FSCK lockup
Alain Hebert
ahebert at pubnix.net
Sat May 8 09:40:23 PDT 2004
Hi,
Situation:
The computer will lock up real tight (no keyboard light working, no
kernel debugger, no network, no disk) running fsck.
(Dual P4 Xeon 2.4Ghz, 2GB RAM, using a Promise PDC20378 SATA150
controller in mirror mode on two identical Seagate ST3160023AS drives)
This just happen after a lockup with XFree, thus I dont have a
theorie nor any infos on a way to figure out which fix/patch introduce
this problem.
Work done:
Platform test: CPU's, Memory, Disk, Temperature, power supply. All Ok.
Was using a 2 weeks old current, updated to latest current this
morning, no luck.
Change the kernel from SMP to UP, no luck.
Try different method/parms with fsck, no luck
Been googling for reference or similar situation without luck.
Things to do:
Have yet to try with RELENG_5_2.
use strace to see where this happen.
Add debugging code to fsck to find where this happen.
Status:
The file system seems ok, all files are there, find works, no
obvious inconsistency, dd if=/dev/ar0s1 dump the entire disk without any
errors.
Request:
Any hint? This combinaison of hardware is deployed (10+ servers)
for months now and this is the first problem I encounter. But this is
also the only one running current.
Config:
----- # disklabel -r /dev/ar0s1
# /dev/ar0s1:
8 partitions:
# size offset fstype [fsize bsize bps/cpg]
a: 304107709 8388608 4.2BSD 2048 16384 28552
b: 8388608 0 swap
c: 312496317 0 unused 0 0 # "raw" part,
don't edit
----- # tunefs -p /dev/ar0s1a
tunefs: ACLs: (-a) disabled
tunefs: MAC multilabel: (-l) disabled
tunefs: soft updates: (-n) enabled
tunefs: maximum blocks per file in a cylinder group: (-e) 2048
tunefs: average file size: (-f) 16384
tunefs: average number of files in a directory: (-s) 64
tunefs: minimum percentage of free space: (-m) 8%
tunefs: optimization preference: (-o) time
tunefs: volume label: (-L)
--
Alain Hebert ahebert at pubnix.net
PubNIX Inc.
P.O. Box 175 Beaconsfield, Quebec H9W 5T7
tel 514-990-5911 http://www.pubnix.net fax 514-990-9443
-------------- next part --------------
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #1: Sat May 8 10:56:30 EDT 2004
root at aal2.pubnix.net:/usr/src/sys/i386/compile/AAL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0945000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc09451f4.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2405.46-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 2147418112 (2047 MB)
avail memory = 2095943680 (1998 MB)
ACPI APIC Table: <IntelR AWRDACPI>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
ioapic0: Changing APIC ID to 4
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
random: <entropy source, Software, Yarrow>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IntelR AWRDACPI> on motherboard
acpi0: [GIANT-LOCKED]
pcibios: BIOS version 2.10
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> port 0x530-0x537 on acpi0
cpu1: <ACPI CPU> port 0x530-0x537 on acpi0
cpu2: <ACPI CPU> port 0x530-0x537 on acpi0
cpu3: <ACPI CPU> port 0x530-0x537 on acpi0
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82875P host to AGP bridge> mem 0xf0000000-0xf7ffffff at device 0.0 on pci0
agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xf0000000
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 16
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.CSAB - AE_NOT_FOUND
pci2: <ACPI PCI bus> on pcib2
pci2: <network, ethernet> at device 1.0 (no driver attached)
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xbc00-0xbc1f irq 16 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbc00
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xb000-0xb01f irq 19 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb000
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xb400-0xb41f irq 18 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb400
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xb800-0xb81f irq 16 at device 29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb800
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfc100000-0xfc1003ff irq 23 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfc100000
ehci0: [GIANT-LOCKED]
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
ehci_pci_attach: companion usb3
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: (0x8086) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xfb120000-0xfb123fff,0xfb126000-0xfb1267ff irq 20 at device 3.0 on pci3
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfb126000
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:e0:18:00:00:43:2b:be
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:18:43:2b:be
fwe0: Ethernet address: 02:e0:18:43:2b:be
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
atapci0: <Promise PDC20378 SATA150 controller> port 0x8400-0x847f,0x8000-0x800f,0x8c00-0x8c3f mem 0xfb100000-0xfb11ffff,0xfb125000-0xfb125fff irq 23 at device 4.0 on pci3
atapci0: failed: rid 0x20 is memory, requested 4
atapci0: Reserved 0x20000 bytes for rid 0x20 type 3 at 0xfb100000
atapci0: Reserved 0x1000 bytes for rid 0x1c type 3 at 0xfb125000
ata2: at 0xfb125000 on atapci0
ata3: at 0xfb125000 on atapci0
ata4: at 0xfb125000 on atapci0
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x8800-0x88ff mem 0xfb124000-0xfb124fff irq 22 at device 10.0 on pci3
ahc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x8800
ahc0: [GIANT-LOCKED]
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
pcib4: <PCI-PCI bridge> at device 11.0 on pci3
pci4: <PCI bus> on pcib4
pcib4: slot 4 INTA is routed to irq 23
pcib4: slot 5 INTA is routed to irq 20
fxp0: <Intel 82550 Pro/100 Ethernet> port 0x7000-0x703f mem 0xfb000000-0xfb01ffff,0xfb041000-0xfb041fff irq 23 at device 4.0 on pci4
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfb041000
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:02:b3:ce:19:3f
fxp0: [GIANT-LOCKED]
fxp1: <Intel 82550 Pro/100 Ethernet> port 0x7400-0x743f mem 0xfb020000-0xfb03ffff,0xfb040000-0xfb040fff irq 20 at device 5.0 on pci4
fxp1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfb040000
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:02:b3:ce:19:40
fxp1: [GIANT-LOCKED]
ohci0: <OPTi 82C861 (FireLink) USB controller> mem 0xfb127000-0xfb127fff irq 20 at device 12.0 on pci3
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfb127000
ohci0: [GIANT-LOCKED]
usb5: OHCI version 1.0, legacy support
usb5: <OPTi 82C861 (FireLink) USB controller> on ohci0
usb5: USB revision 1.0
uhub5: OPTi OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 UDMA100 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: at 0x1f0 irq 14 on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: at 0x170 irq 15 on atapci1
atapci2: <Intel ICH5 SATA150 controller> port 0xd000-0xd00f,0xcc00-0xcc03,0xc800-0xc807,0xc400-0xc403,0xc000-0xc007 irq 18 at device 31.2 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd000
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0xc000
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xc400
ata5: at 0xc000 on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0xc800
atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xcc00
ata6: at 0xc800 on atapci2
ichsmb0: <Intel 82801EB (ICH5) SMBus controller> port 0x500-0x51f irq 17 at device 31.3 on pci0
ichsmb0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x500
ichsmb0: [GIANT-LOCKED]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
pcm0: <Intel ICH5 (82801EB)> port 0xdc00-0xdc3f,0xd800-0xd8ff mem 0xfc102000-0xfc1020ff,0xfc101000-0xfc1011ff irq 17 at device 31.5 on pci0
pcm0: Reserved 0x200 bytes for rid 0x18 type 3 at 0xfc101000
pcm0: Reserved 0x100 bytes for rid 0x1c type 3 at 0xfc102000
pcm0: [GIANT-LOCKED]
pcm0: <Analog Devices AD1985 AC97 Codec>
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found
Probing for PnP devices on ppbus0:
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
orm0: <Option ROMs> at iomem 0xd5000-0xd57ff,0xcc000-0xccfff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acd0: DVDR <PIONEER DVD-RW DVR-106D> at ata0-master PIO4
ad4: 152627MB <ST3160023AS> [310101/16/63] at ata2-master SATA150
ad6: 152627MB <ST3160023AS> [310101/16/63] at ata3-master SATA150
ar0: 152587MB <ATA RAID1 array> [19452/255/63] status: READY subdisks:
disk0 READY on ad4 at ata2-master
disk1 READY on ad6 at ata3-master
Waiting 15 seconds for SCSI devices to settle
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
cd1 at ata0 bus 0 target 0 lun 0
cd1: <PIONEER DVD-RW DVR-106D 1.07> Removable CD-ROM SCSI-0 device
cd1: 16.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
cd0 at ahc0 bus 0 target 0 lun 0
cd0: <YAMAHA CRW2100S 1.0G> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 7)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Mounting root from ufs:/dev/ar0s1a
WARNING: / was not properly dismounted
WARNING: / was not properly dismounted
IP Filter: v3.4.31 initialized. Default = pass all, Logging = enabled
More information about the freebsd-current
mailing list