Panic on boot
Donn Miller
dmmiller at cvzoom.net
Wed May 5 23:25:12 PDT 2004
Doug White wrote:
> On Wed, 28 Apr 2004, Donn Miller wrote:
>
>
>>I've been getting similar panics for the past 2 weeks or so on my HP
>>Pavilion laptop (N5440, 850 MHz Pentium III). Sometimes when I attempt
>>to boot, like 1 out of 20 times, it doesn't panic for some reason. But
>>I do get the same results with every panic, so I know it's not a
>>hardware problem. These occur after "vga0" is probed. It's an S3
>>Savage chipset.
>
>
> [...]
>
>
>>stopped at module_lookupbyname+0x24: movl 0x1c(%ebx), %eax
>>module_lookupbyname(c06d27e1,0,0,c2bbf300,c06efb78) at
>>module_lookupbyname+0x24
>>module_register_init(c0726a8,c1ec00,c1e000,c1ec00,c1e000) at
>>module_register_init+0x32
>>mi_startup() at mi_startup+0xb5
>>begin() at begin+0x2c
>
>
> Looks like you might have a bogus or corrupted module. Can you try
> booting single-user and disabling any _load directives in boot.conf? If
> you can get the system up otherwise, try rebuilding and reinstalling your
> kernel.
I did try renaming boot.conf to boot.conf.bak so that no modules would
load. Did get the same results, i.e., fatal trap, with the
module_lookupbyname being the culprit. Oddly enough, after I restored
my boot.conf to its proper name, and on the next boot, I escaped to the
boot prompt, and did a
unload
boot
all the modules would load, and my system would boot, but I'd keep getting
kernel: cbb1: CardBus card activation failed
So, I suspect the module_lookupbyname has something to do with the
cardbus code clashing with the latest pci commits. BTW, each time I got
the "CardBus card activation failed" messages, the system would halt for
half a second or so and then resume normally. Strangely enough, the
cardbus seems to be initializing properly. There are no PCMCIA cards at
all inserted.
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on
motherboard
pci0: <PCI bus> on pcib0
$PIR: 0:7 INTD routed to irq 5
$PIR: 0:8 INTA routed to irq 5
$PIR: 0:8 INTA routed to irq 5
$PIR: 0:16 INTA routed to irq 11
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem
0xec000000-0xefffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xec000000
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
$PIR: 1:1 INTA routed to irq 11
pci1: <display, VGA> at device 1.0 (no driver attached)
cbb0: <TI1420 PCI-CardBus Bridge> mem 0x10000000-0x10000fff at device
4.0 on pci0
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x10000000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
$PIR: 0:4 INTA routed to irq 11
cbb1: <TI1420 PCI-CardBus Bridge> mem 0x10001000-0x10001fff at device
4.1 on pci0
cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x10001000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
$PIR: 0:4 INTA routed to irq 11
More information about the freebsd-current
mailing list