ATA_FLUSHCACHE failing
Mark Santcroos
marks at ripe.net
Wed May 5 12:54:30 PDT 2004
Hi,
I finally took the time to find out why I can't get a coredump on panic:
ata_controlcmd(&ch->device[MASTER], ATA_FLUSHCACHE, 0, 0, 0);
never returns in ata_shutdown() on my system (dmesg attached).
Commenting it out gives me back my coredumps! ;)
Have you seen this before?
If not, should we maybe create some blacklist of chips that report that
they can flush but in reality can't ...
Mark
-------------- next part --------------
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #8: Wed May 5 15:50:51 CEST 2004
marks at laptop.6bone.nl:/home/marks/proj/perforce/projects/custom/i386/compile/DELL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0800000.
Preloaded elf module "/boot/kernel/if_wi.ko" at 0xc08001cc.
Preloaded elf module "/boot/kernel/wlan.ko" at 0xc0800278.
Preloaded elf module "/boot/kernel/rc4.ko" at 0xc0800324.
Preloaded elf module "/boot/kernel/pccard.ko" at 0xc08003cc.
Preloaded elf module "/boot/kernel/if_xl.ko" at 0xc0800478.
Preloaded elf module "/boot/kernel/miibus.ko" at 0xc0800524.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc08005d0.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc080067c.
Preloaded elf module "/boot/kernel/usb.ko" at 0xc0800728.
Preloaded elf module "/boot/kernel/random.ko" at 0xc08007d0.
Preloaded acpi_dsdt "/boot/c640_custom.aml" at 0xc080087c.
Preloaded elf module "/boot/kernel/acpi_video.ko" at 0xc08008c8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0800978.
Preloaded elf module "/boot/kernel/cbb.ko" at 0xc0800a24.
Preloaded elf module "/boot/kernel/exca.ko" at 0xc0800acc.
Preloaded elf module "/boot/kernel/nmdm.ko" at 0xc0800b78.
ACPI debug layer 0x0 debug level 0x0
Calibrating clock(s) ... i8254 clock: 1193105 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1794712332 Hz
CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.80GHz (1794.71-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 670965760 (639 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x0000000027383fff, 645259264 bytes (157534 pages)
avail memory = 645894144 (615 MB)
bios32: Found BIOS32 Service Directory header at 0xc00ffe80
bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xbfee
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4 Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
ACPI: DSDT was overridden.
tbget-0374: *** Info: Table [DSDT] replaced by host OS
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
acpi0: <DELL CPi R > on motherboard
acpi0: [GIANT-LOCKED]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=1a308086)
pcibios: BIOS version 2.10
Found $PIR table, 11 entries at 0xc00fbb90
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 B 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 2 0 A 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 2 1 A 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 2 3 A 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 2 3 B 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 2 8 A 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 2 12 A 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 2 12 B 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 2 12 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 2 12 D 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 8 0 A 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 8 1 A 0x61 3 4 5 6 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
atpic: Programming IRQ9 as level/low
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
\\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.31.0
\\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 0.31.1
\\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 0.31.2
\\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 0.31.3
\\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.29.0
\\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 0.29.1
\\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 0.29.2
\\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.2.0
\\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.1.0
\\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 0.1.1
ACPI PCI link before setting link priority:
ACPI PCI link before fixup for boot-disabled links:
ACPI PCI link after fixup for boot-disabled links:
ACPI PCI link arbitrated configuration:
\\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.31.0
\\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 0.31.1
\\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 0.31.2
\\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 0.31.3
\\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.29.0
\\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 0.29.1
\\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 0.29.2
\\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.2.0
\\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.1.0
\\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 0.1.1
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base e8000000, size 26, enabled
found-> vendor=0x8086, dev=0x1a30, revid=0x04
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1a31, revid=0x04
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0e (3500 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000bf80, size 5, enabled
pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LNKA)
pcib0: slot 29 INTA is routed to irq 11
found-> vendor=0x8086, dev=0x2482, revid=0x02
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
found-> vendor=0x8086, dev=0x2448, revid=0x42
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x248c, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000bfa0, size 4, enabled
found-> vendor=0x8086, dev=0x248a, revid=0x02
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[10]: type 4, range 32, base 0000d800, size 8, enabled
map[14]: type 4, range 32, base 0000dc80, size 6, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB)
pcib0: slot 31 INTB is routed to irq 11
found-> vendor=0x8086, dev=0x2485, revid=0x02
bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[10]: type 4, range 32, base 0000d400, size 8, enabled
map[14]: type 4, range 32, base 0000dc00, size 7, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB)
pcib0: slot 31 INTB is routed to irq 11
found-> vendor=0x8086, dev=0x2486, revid=0x02
bus=0, slot=31, func=6
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xc000-0xcfff
pcib1: memory decode 0xfc000000-0xfdffffff
pcib1: prefetched decode 0xe0000000-0xe7ffffff
ACPI PCI link initial configuration:
\\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 1.0.0
ACPI PCI link before setting link priority:
ACPI PCI link before fixup for boot-disabled links:
ACPI PCI link after fixup for boot-disabled links:
ACPI PCI link arbitrated configuration:
\\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 1.0.0
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 3, range 32, base e0000000, size 27, enabled
pcib1: device (null) requested decoded memory range 0xe0000000-0xe7ffffff
map[14]: type 4, range 32, base 0000c000, size 8, enabled
pcib1: device (null) requested decoded I/O range 0xc000-0xc0ff
map[18]: type 1, range 32, base fcff0000, size 16, enabled
pcib1: device (null) requested decoded memory range 0xfcff0000-0xfcffffff
pcib1: matched entry for 1.0.INTA (src \\_SB_.PCI0.LNKA)
pcib1: slot 0 INTA is routed to irq 11
found-> vendor=0x1002, dev=0x4c57, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x01a7, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf80
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 16
pcib2: I/O decode 0xe000-0xffff
pcib2: memory decode 0xf4000000-0xfbffffff
pcib2: prefetched decode 0xfff00000-0xfffff
pcib2: Subtractively decoded bridge.
ACPI PCI link initial configuration:
\\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.1.0
\\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.1.1
\\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.1.2
\\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 2.3.0
\\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.3.1
\\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 2.0.0
\\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 2.8.0
ACPI PCI link before setting link priority:
ACPI PCI link before fixup for boot-disabled links:
ACPI PCI link after fixup for boot-disabled links:
ACPI PCI link arbitrated configuration:
\\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.1.0
\\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.1.1
\\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.1.2
\\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 2.3.0
\\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.3.1
\\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 2.0.0
\\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 2.8.0
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 4, range 32, base 0000ec80, size 7, enabled
pcib2: device (null) requested decoded I/O range 0xec80-0xecff
map[14]: type 1, range 32, base f8fffc00, size 7, enabled
pcib2: device (null) requested decoded memory range 0xf8fffc00-0xf8fffc7f
pcib2: matched entry for 2.0.INTA (src \\_SB_.PCI0.LNKC)
pcib2: slot 0 INTA is routed to irq 11
found-> vendor=0x10b7, dev=0x9200, revid=0x78
bus=2, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 00000000, size 12, memory disabled
found-> vendor=0x104c, dev=0xac51, revid=0x00
bus=2, slot=1, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns)
intpin=a, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 00000000, size 12, memory disabled
found-> vendor=0x104c, dev=0xac51, revid=0x00
bus=2, slot=1, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns)
intpin=a, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 00000000, size 12, enabled
pcib2: matched entry for 2.3.INTA (src \\_SB_.PCI0.LNKB)
pcib2: slot 3 INTA is routed to irq 11
found-> vendor=0x104c, dev=0xac50, revid=0x01
bus=2, slot=3, func=0
class=06-07-00, hdrtype=0x02, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec80-0xecff mem 0xf8fffc00-0xf8fffc7f irq 11 at device 0.0 on pci2
xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xf8fffc00
xl0: using memory mapped I/O
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x00105a, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
xl0: Ethernet address: 00:08:74:48:0e:6f
xl0: [GIANT-LOCKED]
cbb0: <TI1420 PCI-CardBus Bridge> at device 1.0 on pci2
pcib2: device cbb0 requested decoded memory range 0xf4000000-0xfbffffff
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf4000000
pccard0: <16-bit PCCard bus> on cbb0
pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD)
pcib2: slot 1 INTA is routed to irq 11
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0xac51104c 0x02100007 0x06070000 0x00822008
0x10: 0xf4000000 0x020000a0 0x20040400 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b
0x40: 0x012a1028 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x2024d025 0x00000000 0x00000000 0x01261222
0x90: 0x6064a6c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe110001 0x00c00000 0x00000000 0x00000017
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb1: <TI1420 PCI-CardBus Bridge> at device 1.1 on pci2
pcib2: device cbb1 requested decoded memory range 0xf4000000-0xfbffffff
cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf4001000
pccard1: <16-bit PCCard bus> on cbb1
pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD)
pcib2: slot 1 INTA is routed to irq 11
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
0x00: 0xac51104c 0x02100007 0x06070000 0x00822008
0x10: 0xf4001000 0x020000a0 0x20050500 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b
0x40: 0x012a1028 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x2024d025 0x00000000 0x00000000 0x01261222
0x90: 0x6064a6c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe110001 0x00c00000 0x00000000 0x00000017
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb2: <TI1410 PCI-CardBus Bridge> irq 11 at device 3.0 on pci2
pcib2: device cbb2 requested decoded memory range 0xf4000000-0xfbffffff
cbb2: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf4002000
pccard2: <16-bit PCCard bus> on cbb2
cbb2: [MPSAFE]
cbb2: PCI Configuration space:
0x00: 0xac50104c 0x02100007 0x06070001 0x00022008
0x10: 0xf4002000 0x020000a0 0x20040302 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b
0x40: 0xab0112a3 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x0044b060 0x00000000 0x00000000 0x01000002
0x90: 0x616000c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe110001 0x00c00000 0x0000000f 0x0000001b
0xb0: 0x08000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=7f ostat1=7f
ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: reset tp2 mask=00 stat0=ff stat1=ff devices=0x0
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pcm0: <Intel ICH3 (82801CA)> port 0xdc80-0xdcbf,0xd800-0xd8ff irq 11 at device 31.5 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd800
pcm0: Reserved 0x40 bytes for rid 0x14 type 4 at 0xdc80
pcm0: [GIANT-LOCKED]
pcm0: <Cirrus Logic CS4205 AC97 Codec (id = 0x4352595b)>
pcm0: Codec features mic channel, tone, simulated stereo, bass boost, 20 bit DAC, 18 bit ADC, 5 bit master volume, SRS 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, variable rate mic, AMAP
pcm0: sndbuf_setmap 284000, 4000; 0xdc577000 -> 284000
pcm0: sndbuf_setmap 288000, 4000; 0xdc57b000 -> 288000
pcm0: sndbuf_setmap 2a4000, 4000; 0xdc57f000 -> 2a4000
pci0: <simple comms> at device 31.6 (no driver attached)
pci0:31:6: Transition from D0 to D3
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 port 0x280-0x287,0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 29 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 29 func 2
acpi_video0: <ACPI video extension> on acpi0
found CRT monitor(100), detectable by BIOS, head #0
found LCD panel(110), detectable by BIOS, head #0
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sc: sc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
vga: vga0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <Option ROMs> at iomem 0xcf800-0xcffff,0xcf000-0xcf7ff,0xc0000-0xcefff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83
b4 1f 00 4f 0d 0e 00 00 07 80 91 87 8f 28 1f 8f
b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83
b4 1f 00 4f 0d 0e 00 00 07 80 91 87 8f 28 1f 8f
b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1794712332 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging disabled
lo0: bpf attached
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acpi_cmbat0: battery initialization start
acpi_cmbat0: battery initialization done, tried 1 times
acpi_cmbat1: battery initialization start
acpi_cmbat1: battery initialization done, tried 1 times
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on Intel ICH3 chip
ata0-master: setting UDMA100 on Intel ICH3 chip
ad0: <HTS726060M9AT00/MH4OA60A> ATA-6 disk at ata0-master
ad0: 57231MB (117210240 sectors), 116280 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
pcm0: measured ac97 link rate at 48013 Hz, will use 48000 Hz
GEOM: new disk ad0
[0] f:00 typ:132 s(CHS):0/1/1 e(CHS):86/254/63 s:63 l:1397592
[1] f:80 typ:165 s(CHS):87/0/1 e(CHS):1023/254/63 s:1397655 l:62653500
[2] f:00 typ:165 s(CHS):54/13/1 e(CHS):404/15/63 s:64051155 l:42672861
[3] f:00 typ:131 s(CHS):405/0/1 e(CHS):567/15/63 s:106724016 l:10486224
GEOM: Configure ad0s1, start 32256 length 715567104 end 715599359
GEOM: Configure ad0s2, start 715599360 length 32078592000 end 32794191359
GEOM: Configure ad0s3, start 32794191360 length 21848504832 end 54642696191
GEOM: Configure ad0s4, start 54642696192 length 5368946688 end 60011642879
GEOM: Configure ad0s2a, start 8192 length 31407495168 end 31407503359
GEOM: Configure ad0s2b, start 31407503360 length 671088640 end 32078591999
GEOM: Configure ad0s2c, start 0 length 32078592000 end 32078591999
GEOM: Configure ad0s3a, start 8192 length 21848496640 end 21848504831
GEOM: Configure ad0s3c, start 0 length 21848504832 end 21848504831
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
pcib2: device pccard2 requested decoded memory range 0xf4000000-0xfbffffff
pccard2: CIS version PC Card Standard 5.0
pccard2: CIS info: Dell, TrueMobile 1150 Series PC Card, Version 01.01,
pccard2: Manufacturer code 0x156, product 0x2
pccard2: function 0: network adapter, ccr addr 3e0 mask 1
pccard2: function 0, config table entry 1: I/O card; irq mask ffff; iomask 6, iospace 0-3f; io16 irqpulse irqlevel
pcib2: device pccard2 requested decoded I/O range 0xe000-0xffff
pcib2: device pccard2 requested decoded memory range 0xf4000000-0xfbffffff
wi0: <Dell TrueMobile 1150 Series PC Card> at port 0xe000-0xe03f irq 11 function 0 config 1 on pccard2
pcib2: device wi0 requested decoded I/O range 0xe000-0xe03f
pcib2: device pccard2 requested decoded I/O range 0xe000-0xe03f
pcib2: device wi0 requested decoded I/O range 0xe000-0xe03f
wi0: [GIANT-LOCKED]
wi0: using Lucent Embedded WaveLAN/IEEE
wi0: Lucent Firmware: Station (8.10.1)
wi0: bpf attached
wi0: Ethernet address: 00:02:2d:6b:f3:ae
wi0: bpf attached
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wi0: bpf attached
Linux ELF exec handler installed
linprocfs registered
link_elf: symbol callout_stop undefined
More information about the freebsd-current
mailing list