Problems updating KDE off ports

Thu Jul 8 06:09:22 PDT 2004

Hi there
Currently running FreeBSD 5.2-CURRENT #0: Mon Jun 28 19:04:23 EST 2004

I'm having problems when trying to update KDE via ports 

Attached is a dmesg output as well as a copy of the error messages

Any help or advice is greatly appreciated :-)

-------------- next part --------------
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #0: Mon Jun 28 19:04:23 EST 2004
    root at server.skynet.no-ip.org:/usr/obj/usr/src/sys/SKYNET
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0771000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07711f4.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 1500MHz (1500.06-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf07  Stepping = 7
  Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory  = 536805376 (511 MB)
avail memory = 519913472 (495 MB)
random: <entropy source, Software, Yarrow>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <VIAP4X AWRDACPI> on motherboard
acpi0: [GIANT-LOCKED]
pcibios: BIOS version 2.10
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x500-0x50f,0x400-0x47f,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 11 INTA is routed to irq 5
pcib0: slot 17 INTC is routed to irq 11
agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib0: slot 1 INTA is routed to irq 11
pcib1: slot 0 INTA is routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd000-0xd07f mem 0xef000000-0xef00007f irq 5 at device 11.0 on pci0
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:04:75:de:bb:94
xl0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8233 UDMA100 controller> port 0xd400-0xd40f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <multimedia, audio> at device 17.5 (no driver attached)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
orm0: <Option ROM> at iomem 0xcc000-0xcc7ff on isa0
pmtimer0 on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1500062584 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ad0: 114473MB <WDC WD1200JB-00EVA0> [232581/16/63] at ata0-master UDMA100
acd0: DVDROM <JLMS XJ-HD166S> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s1a
pid 34593 (kdeinit), uid 1001: exited on signal 11 (core dumped)
pid 34598 (kdeinit), uid 1001: exited on signal 11 (core dumped)
pid 34601 (kdeinit), uid 1001: exited on signal 11 (core dumped)
pid 34684 (kdeinit), uid 1001: exited on signal 11 (core dumped)
pid 35899 (kdeinit), uid 1001: exited on signal 11 (core dumped)
pid 45562 (artsshell), uid 1001: exited on signal 6 (core dumped)
pid 28008 (kdeinit), uid 1001: exited on signal 11 (core dumped)
pid 28013 (kdeinit), uid 1001: exited on signal 11 (core dumped)
pid 28016 (kdeinit), uid 1001: exited on signal 11 (core dumped)
pid 28037 (artsshell), uid 1001: exited on signal 6 (core dumped)
pid 28097 (kdeinit), uid 0: exited on signal 11 (core dumped)
pid 28102 (kdeinit), uid 0: exited on signal 11 (core dumped)
pid 28105 (kdeinit), uid 0: exited on signal 11 (core dumped)
pid 60509 (artsshell), uid 0: exited on signal 6 (core dumped)
pid 16563 (dcopidl), uid 0: exited on signal 6 (core dumped)
pid 72319 (dcopidl), uid 0: exited on signal 6 (core dumped)
pid 21182 (conftest), uid 0: exited on signal 12 (core dumped)
pid 69241 (dcopidl), uid 0: exited on signal 6 (core dumped)
pid 68794 (dcopidl), uid 0: exited on signal 6 (core dumped)
pid 11634 (kdeinit), uid 0: exited on signal 11 (core dumped)
pid 11639 (kdeinit), uid 0: exited on signal 11 (core dumped)
pid 11642 (kdeinit), uid 0: exited on signal 11 (core dumped)
pid 12377 (artsshell), uid 0: exited on signal 6 (core dumped)
-------------- next part --------------
Fatal error 'Spinlock called when not threaded.' at line 83 in file /usr/src/lib
/libpthread/thread/thr_spinlock.c (errno = 0)
Abort trap (core dumped)
gmake[3]: *** [ksycoca.kidl] Error 1
gmake[3]: Leaving directory `/usr/ports/x11/kdelibs3/work/kdelibs-3.2.3/kdecore'
gmake[2]: *** [all-recursive] Error 1
gmake[2]: Leaving directory `/usr/ports/x11/kdelibs3/work/kdelibs-3.2.3/kdecore'
gmake[1]: *** [all-recursive] Error 1
gmake[1]: Leaving directory `/usr/ports/x11/kdelibs3/work/kdelibs-3.2.3'
gmake: *** [all] Error 2
*** Error code 2

Stop in /usr/ports/x11/kdelibs3.
*** Error code 1

Stop in /usr/ports/x11/kde3.
** Command failed [exit code 1]: /usr/bin/script -qa /tmp/portupgrade13368.0 mak
e
** Fix the problem and try again.
** Listing the failed packages (*:skipped / !:failed)
        ! x11/kde3 (kde-3.1.4)  (new compiler error)
--->  Packages processed: 0 done, 0 ignored, 0 skipped and 1 failed