5.2R + ULE crash

John strgout at unixjunkie.com
Wed Jan 21 11:35:12 PST 2004


Well i'm kinda fly blind on the crash dump so if anyone else wants me to 
show something else just let me know. 
This happened on Day 4.5 of compiling Open Office 1.1.
I haven't touched much of anything else on the system after the
crash but i did have a power failure a day after the crash.
Oh btw /usr is also nfs exported on this box and i did have a client
using /usr at the time of the crash. (mounted via mount_nfs with no options)

kernel config, plus crash dump info, and dmesg follow.

#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files. 
# If you are in doubt as to the purpose or necessity of a line, check first 
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.394 2003/12/03 21:13:06 jhb Exp $

machine		i386
cpu		I486_CPU
cpu		I586_CPU
cpu		I686_CPU
ident		NFS

#To statically compile in device wiring instead of /boot/device.hints
#hints		"GENERIC.hints"		#Default places to look for devices.

makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols

options         SCHED_ULE
#options 	SCHED_4BSD		#4BSD scheduler
options 	INET			#InterNETworking
options 	INET6			#IPv6 communications protocols
options 	FFS			#Berkeley Fast Filesystem
options 	SOFTUPDATES		#Enable FFS soft updates support
options 	UFS_ACL			#Support for access control lists
options 	UFS_DIRHASH		#Improve performance on big directories
options 	MD_ROOT			#MD is a potential root device
options 	NFSCLIENT		#Network Filesystem Client
options 	NFSSERVER		#Network Filesystem Server
options 	NFS_ROOT		#NFS usable as /, requires NFSCLIENT
options 	MSDOSFS			#MSDOS Filesystem
options 	CD9660			#ISO 9660 Filesystem
options 	PROCFS			#Process filesystem (requires PSEUDOFS)
options 	PSEUDOFS		#Pseudo-filesystem framework
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
options 	COMPAT_FREEBSD4		#Compatible with FreeBSD4
options 	SCSI_DELAY=15000	#Delay (in ms) before probing SCSI
options 	KTRACE			#ktrace(1) support
options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores
options 	_KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
options 	AHC_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~128k to driver.
options 	AHD_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~215k to driver.

# Debugging for use in -current
options 	DDB			#Enable the kernel debugger
options 	INVARIANTS		#Enable calls of extra sanity checking
options 	INVARIANT_SUPPORT	#Extra sanity checks of internal structures, required by INVARIANTS
options 	WITNESS			#Enable checks to detect deadlocks and cycles
options 	WITNESS_SKIPSPIN	#Don't run witness on spinlocks for speed

# To make an SMP kernel, the next two are needed
options 	SMP			# Symmetric MultiProcessor Kernel
device		apic			# I/O APIC

device		isa
device		eisa
device		pci

# Floppy drives
device		fdc

# ATA and ATAPI devices
device		ata
device		atadisk			# ATA disk drives
device		ataraid			# ATA RAID drives
device		atapicd			# ATAPI CDROM drives
device		atapifd			# ATAPI floppy drives
device		atapist			# ATAPI tape drives
options 	ATA_STATIC_ID		#Static device numbering

# SCSI Controllers
device		ahb		# EISA AHA1742 family
device		ahc		# AHA2940 and onboard AIC7xxx devices
device		ahd		# AHA39320/29320 and onboard AIC79xx devices
device		amd		# AMD 53C974 (Tekram DC-390(T))
device		isp		# Qlogic family
device		mpt		# LSI-Logic MPT-Fusion
#device		ncr		# NCR/Symbios Logic
device		sym		# NCR/Symbios Logic (newer chipsets + those of `ncr')
device		trm		# Tekram DC395U/UW/F DC315U adapters

device		adv		# Advansys SCSI adapters
device		adw		# Advansys wide SCSI adapters
device		aha		# Adaptec 154x SCSI adapters
device		aic		# Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
device		bt		# Buslogic/Mylex MultiMaster SCSI adapters

device		ncv		# NCR 53C500
device		nsp		# Workbit Ninja SCSI-3
device		stg		# TMC 18C30/18C50

# SCSI peripherals
device		scbus		# SCSI bus (required for SCSI)
device		ch		# SCSI media changers
device		da		# Direct Access (disks)
device		sa		# Sequential Access (tape etc)
device		cd		# CD
device		pass		# Passthrough device (direct SCSI access)
device		ses		# SCSI Environmental Services (and SAF-TE)

# RAID controllers interfaced to the SCSI subsystem
device		amr		# AMI MegaRAID
device		asr		# DPT SmartRAID V, VI and Adaptec SCSI RAID
device		ciss		# Compaq Smart RAID 5*
device		dpt		# DPT Smartcache III, IV - See NOTES for options
device		iir		# Intel Integrated RAID
device		ips		# IBM (Adaptec) ServeRAID
device		mly		# Mylex AcceleRAID/eXtremeRAID

# RAID controllers
device		aac		# Adaptec FSA RAID
device		aacp		# SCSI passthrough for aac (requires CAM)
device		ida		# Compaq Smart RAID
device		mlx		# Mylex DAC960 family
device		pst		# Promise Supertrak SX6000
device		twe		# 3ware ATA RAID

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc		# AT keyboard controller
device		atkbd		# AT keyboard
device		psm		# PS/2 mouse

device		vga		# VGA video card driver

device		splash		# Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device		sc

# Enable this for the pcvt (VT220 compatible) console driver
#device		vt
#options 	XSERVER			# support for X server on a vt console
#options 	FAT_CURSOR		# start with block cursor

device		agp		# support several AGP chipsets

# Floating point support - do not disable.
device		npx

# Power management support (see NOTES for more options)
#device		apm
# Add suspend/resume support for the i8254.
device		pmtimer

# PCCARD (PCMCIA) support
# Pcmcia and cardbus bridge support
device		cbb			# cardbus (yenta) bridge
#device		pcic			# ExCA ISA and PCI bridges
device		pccard			# PC Card (16-bit) bus
device		cardbus			# CardBus (32-bit) bus

# Serial (COM) ports
device		sio		# 8250, 16[45]50 based serial ports

# Parallel port
device		ppc
device		ppbus		# Parallel port bus (required)
device		lpt		# Printer
device		plip		# TCP/IP over parallel
device		ppi		# Parallel port interface device
#device		vpo		# Requires scbus and da

# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to the sio and/or ppc drivers):
#device         puc

# PCI Ethernet NICs.
device		de		# DEC/Intel DC21x4x (``Tulip'')
device		em		# Intel PRO/1000 adapter Gigabit Ethernet Card
device		txp		# 3Com 3cR990 (``Typhoon'')
device		vx		# 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device		miibus		# MII bus support
device		bfe		# Broadcom BCM440x 10/100 ethernet
device		bge		# Broadcom BCM570xx Gigabit Ethernet
device		dc		# DEC/Intel 21143 and various workalikes
device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
device		pcn		# AMD Am79C97x PCI 10/100 (precedence over 'lnc')
device		re		# RealTek 8139C+/8169/8169S/8110S
device		rl		# RealTek 8129/8139
device		sf		# Adaptec AIC-6915 (``Starfire'')
device		sis		# Silicon Integrated Systems SiS 900/SiS 7016
device		sk		# SysKonnect SK-984x and SK-982x gigabit ethernet
device		ste		# Sundance ST201 (D-Link DFE-550TX)
device		ti		# Alteon Networks Tigon I/II gigabit ethernet
device		tl		# Texas Instruments ThunderLAN
device		tx		# SMC EtherPower II (83c170 ``EPIC'')
device		vr		# VIA Rhine, Rhine II
device		wb		# Winbond W89C840F
device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs.  pccard nics included.
device		cs		# Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
device		ed		# NE[12]000, SMC Ultra, 3c503, DS8390 cards
device		ex		# Intel EtherExpress Pro/10 and Pro/10+
device		ep		# Etherlink III based cards
device		fe		# Fujitsu MB8696x based cards
device		ie		# EtherExpress 8/16, 3C507, StarLAN 10 etc.
device		lnc		# NE2100, NE32-VL Lance Ethernet cards
device		sn		# SMC's 9000 series of ethernet chips
device		xe		# Xircom pccard ethernet

# ISA devices that use the old ISA shims
#device		le

# Wireless NIC cards
device		wlan		# 802.11 support
device		an		# Aironet 4500/4800 802.11 wireless NICs. 
device		awi		# BayStack 660 and others
device		wi		# WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device		wl		# Older non 802.11 Wavelan wireless NIC.

# Pseudo devices - the number indicates how many units to allocate.
device		random		# Entropy device
device		loop		# Network loopback
device		ether		# Ethernet support
device		sl		# Kernel SLIP
device		ppp		# Kernel PPP
device		tun		# Packet tunnel.
device		pty		# Pseudo-ttys (telnet etc)
device		md		# Memory "disks"
device		gif		# IPv6 and IPv4 tunneling
device		faith		# IPv6-to-IPv4 relaying (translation)

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device		bpf		# Berkeley packet filter

# USB support
device		uhci		# UHCI PCI->USB interface
device		ohci		# OHCI PCI->USB interface
device		usb		# USB Bus (required)
#device		udbp		# USB Double Bulk Pipe devices
device		ugen		# Generic
device		uhid		# "Human Interface Devices"
device		ukbd		# Keyboard
device		ulpt		# Printer
device		umass		# Disks/Mass storage - Requires scbus and da
device		ums		# Mouse
device		urio		# Diamond Rio 500 MP3 player
device		uscanner	# Scanners
# USB Ethernet, requires mii
device		aue		# ADMtek USB ethernet
device		axe		# ASIX Electronics USB ethernet
device		cue		# CATC USB ethernet
device		kue		# Kawasaki LSI USB ethernet

# FireWire support
device		firewire	# FireWire bus code
device		sbp		# SCSI over FireWire (Requires scbus and da)
device		fwe		# Ethernet over FireWire (non-standard!)
Script started on Wed Jan 21 00:57:35 2004
You have mail.
nfs# gdb -k kernel.debug /var/crash/vmcore.0
GNU gdb 5.2.1 (FreeBSD)
Copyright 2002 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for details.
This GDB was configured as "i386-unknown-freebsd"...
panic: from debugger
panic messages:
---
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address	= 0x300
fault code		= supervisor read, page not present
instruction pointer	= 0x8:0xc07611e0
stack pointer	        = 0x10:0xc9a2a818
frame pointer	        = 0x10:0xc9a2a824
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, def32 1, gran 1
processor eflags	= resume, IOPL = 0
current process		= 65729 (tcsh)
panic: from debugger
cpuid = 0; 


Fatal trap 3: breakpoint instruction fault while in kernel mode
cpuid = 0; apic id = 00
instruction pointer	= 0x8:0xc0759a26
stack pointer	        = 0x10:0xc9a2a628
frame pointer	        = 0x10:0xc9a2a62c
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, def32 1, gran 1
processor eflags	= IOPL = 0
current process		= 65729 (tcsh)
panic: from debugger
cpuid = 0; 
Uptime: 7d9h56m0s
Dumping 128 MB
 16 32 48 64 80 96 112
---
Reading symbols from /boot/kernel/linux.ko...done.
Loaded symbols for /boot/kernel/linux.ko
Reading symbols from /boot/kernel/smbfs.ko...done.
Loaded symbols for /boot/kernel/smbfs.ko
Reading symbols from /boot/kernel/libiconv.ko...done.
Loaded symbols for /boot/kernel/libiconv.ko
Reading symbols from /boot/kernel/libmchain.ko...done.
Loaded symbols for /boot/kernel/libmchain.ko
Reading symbols from /boot/kernel/linprocfs.ko...done.
Loaded symbols for /boot/kernel/linprocfs.ko
#0  doadump () at /usr/src/sys/kern/kern_shutdown.c:240
240		dumping++;
(kgdb) list *0xc07611e0
0xc07611e0 is in lapic_ipi_wait (/usr/src/sys/i386/i386/local_apic.c:655).
650			incr = 0;
651			delay = 1;
652		} else
653			incr = 1;
654		for (x = 0; x < delay; x += incr) {
655			if ((lapic->icr_lo & APIC_DELSTAT_MASK) == APIC_DELSTAT_IDLE)
656				return (1);
657			ia32_pause();
658		}
659		return (0);
(kgdb) list *0xc0759a26
0xc0759a26 is in Debugger (machine/atomic.h:263).
258	ATOMIC_ASM(add,	     long,  "addl %1,%0",  "ir",  v);
259	ATOMIC_ASM(subtract, long,  "subl %1,%0",  "ir",  v);
260	
261	ATOMIC_STORE_LOAD(char,	"cmpxchgb %b0,%1", "xchgb %b1,%0");
262	ATOMIC_STORE_LOAD(short,"cmpxchgw %w0,%1", "xchgw %w1,%0");
263	ATOMIC_STORE_LOAD(int,	"cmpxchgl %0,%1",  "xchgl %1,%0");
264	ATOMIC_STORE_LOAD(long,	"cmpxchgl %0,%1",  "xchgl %1,%0");
265	
266	#undef ATOMIC_ASM
267	#undef ATOMIC_STORE_LOAD
(kgdb) backtrace
#0  doadump () at /usr/src/sys/kern/kern_shutdown.c:240
#1  0xc05f2ad6 in boot (howto=260) at /usr/src/sys/kern/kern_shutdown.c:372
#2  0xc05f2e3d in panic () at /usr/src/sys/kern/kern_shutdown.c:550
#3  0xc045e95d in db_panic () at /usr/src/sys/ddb/db_command.c:450
#4  0xc045e8f0 in db_command (last_cmdp=0xc0871600, cmd_table=0xc07fdcc0, 
    aux_cmd_tablep=0xc07f4eb0, aux_cmd_tablep_end=0xc07f4ec8)
    at /usr/src/sys/ddb/db_command.c:346
#5  0xc045e9cb in db_command_loop () at /usr/src/sys/ddb/db_command.c:472
#6  0xc046121b in db_trap (type=12, code=0) at /usr/src/sys/ddb/db_trap.c:73
#7  0xc0759755 in kdb_trap (type=12, code=0, regs=0xc9a2a7d8)
    at /usr/src/sys/i386/i386/db_interface.c:171
#8  0xc076cc0b in trap_fatal (frame=0xc9a2a7d8, eva=768)
    at /usr/src/sys/i386/i386/trap.c:816
#9  0xc076c36d in trap (frame=
      {tf_fs = 24, tf_es = 16, tf_ds = 16, tf_edi = 1, tf_esi = 0, tf_ebp = -912087004, tf_isp = -912087036, tf_ebx = 0, tf_edx = 0, tf_ecx = 1000000, tf_eax = 243, tf_trapno = 12, tf_err = 0, tf_eip = -1066004000, tf_cs = 8, tf_eflags = 65671, tf_esp = 243, tf_ss = 0}) at /usr/src/sys/i386/i386/trap.c:250
#10 0xc075ada8 in calltrap () at {standard input}:94
#11 0xc076132a in lapic_ipi_vectored (vector=0, dest=0)
    at /usr/src/sys/i386/i386/local_apic.c:725
#12 0xc0765933 in ipi_selected (cpus=1, ipi=1)
    at /usr/src/sys/i386/i386/mp_machdep.c:1115
---Type <return> to continue, or q <return> to quit---
#13 0xc060371f in kseq_notify (ke=0xc139c420, cpu=0)
    at /usr/src/sys/kern/sched_ule.c:520
#14 0xc06049a8 in sched_add (td=0xc1f87280)
    at /usr/src/sys/kern/sched_ule.c:1366
#15 0xc05f7f20 in setrunqueue (td=0xc1f87280)
    at /usr/src/sys/kern/kern_switch.c:340
#16 0xc0604142 in sched_wakeup (td=0xc1f87280)
    at /usr/src/sys/kern/sched_ule.c:999
#17 0xc05f9546 in setrunnable (td=0xc1f87280)
    at /usr/src/sys/kern/kern_synch.c:570
#18 0xc05f91ba in wakeup (ident=0xc088a600)
    at /usr/src/sys/kern/kern_synch.c:411
#19 0xc05c6ae5 in g_io_request (bp=0xc27f8908, cp=0xc2031480)
    at /usr/src/sys/geom/geom_io.c:260
#20 0xc05c4d58 in g_dev_strategy (bp=0xc4655488)
    at /usr/src/sys/geom/geom_dev.c:395
#21 0xc0633ac8 in dev_strategy (bp=0xc4655488)
    at /usr/src/sys/kern/vfs_bio.c:3079
#22 0xc05c32e6 in spec_xstrategy (vp=0xc210671c, bp=0xc4655488)
    at /usr/src/sys/fs/specfs/spec_vnops.c:517
#23 0xc05c38a5 in spec_getpages (ap=0xc9a2a9f4)
    at /usr/src/sys/fs/specfs/spec_vnops.c:752
#24 0xc05c2623 in spec_vnoperate (ap=0x0)
---Type <return> to continue, or q <return> to quit---
    at /usr/src/sys/fs/specfs/spec_vnops.c:122
#25 0xc071668d in ffs_getpages (ap=0xc9a2aa2c) at vnode_if.h:1317
#26 0xc073a003 in vnode_pager_getpages (object=0xc22b1108, m=0x0, count=8192, 
    reqpage=0) at vnode_if.h:1317
#27 0xc05df0c4 in exec_map_first_page (imgp=0xc9a2ab94)
    at /usr/src/sys/vm/vm_pager.h:129
#28 0xc05de5f2 in kern_execve (td=0xc20efc80, fname=---Can't read userspace from dump, or kernel process---

)
    at /usr/src/sys/kern/kern_exec.c:287
#29 0xc05deef8 in execve (td=0xc20efc80, uap=0x0)
    at /usr/src/sys/kern/kern_exec.c:693
#30 0xc076ceff in syscall (frame=
      {tf_fs = 47, tf_es = 47, tf_ds = 47, tf_edi = 134999920, tf_esi = 135030784, tf_ebp = -1077969256, tf_isp = -912085644, tf_ebx = 672958240, tf_edx = 135030798, tf_ecx = 672958240, tf_eax = 59, tf_trapno = 12, tf_err = 2, tf_eip = 672483487, tf_cs = 31, tf_eflags = 530, tf_esp = -1077969284, tf_ss = 47})
    at /usr/src/sys/i386/i386/trap.c:1010
#31 0xc075adfd in Xint0x80_syscall () at {standard input}:136
---Can't read userspace from dump, or kernel process---

(kgdb) nfs# 
nfs# 

# dmesg
Script done on Wed Jan 21 01:03:55 2004
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2-RELEASE #0: Sat Jan 17 17:13:33 CST 2004
    root at nfs.unixjunkie.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0961000.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium/P55C (232.67-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x543  Stepping = 3
  Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory  = 134217728 (128 MB)
avail memory = 120758272 (115 MB)
Intel Pentium detected, installing workaround for F00F bug
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <display, VGA> at device 8.0 (no driver attached)
bt0: <Buslogic Multi-Master SCSI Host Adapter> port 0xfff4-0xfff7 mem 0xfff7f000-0xfff7ffff irq 10 at device 17.0 on pci0
bt0: BT-958 FW Rev. 5.07B Ultra Wide SCSI Host Adapter, SCSI ID 7, 192 CCBs
de0: <Digital 21140A Fast Ethernet> port 0xf880-0xf8ff mem 0xfff7ec00-0xfff7ec7f irq 9 at device 19.0 on pci0
de0: SMC 9332BDT 21140A [10-100Mb/s] pass 2.2
de0: address 00:e0:29:00:b1:c2
orm0: <Option ROMs> at iomem 0xea000-0xebfff,0xe9000-0xe9fff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
psmcpnp0: irq resource info is missing; assuming irq 12
unknown: <PNP0700> can't assign resources (port)
ppc1: parallel port not found.
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
Timecounter "TSC" frequency 232671453 Hz quality 800
Timecounters tick every 10.000 msec
Waiting 15 seconds for SCSI devices to settle
de0: enabling Full Duplex 100baseTX port
GEOM: create disk da0 dp=0xc208ec50
da0 at bt0 bus 0 target 4 lun 0
da0: <SEAGATE ST39175LW 0001> Fixed Direct Access SCSI-2 device 
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da0: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)
Mounting root from ufs:/dev/da0s1a
WARNING: / was not properly dismounted
WARNING: /usr was not properly dismounted
/usr: superblock summary recomputed
WARNING: /var was not properly dismounted
de0: enabling 100baseTX port
de0: enabling Full Duplex 100baseTX port



More information about the freebsd-current mailing list