Sound blaster live and onboard sound
Kaarthik Sivakumar
kaarthik at comcast.net
Fri Jan 2 23:58:25 PST 2004
Hi
I have a DELL 2400 that has an Intel i845GL based board. I am currently
running 5.2-RC2 on it, mainly to get support for the onboard Broadcom 440X.
This machine has onboard sound that has been turned off in the BIOS and there
is a SoundBlaster Live! card in it. I kldload-ed the emu10k1 module (and
later on just kldload-ed snd_drivers) but this sound card is not identified
and no pcm device shows up in dmesg. I have attached dmesg output for this
and the output of 'pciconf -lv', which shows the sound blaster card but with
no drivers attached to it.
When I turn on the onboard sound in the BIOS, I see the 'pcm' line in dmesg.
What exactly should I be doing here to get the sound blaster card working? I
am still running the GENERIC kernel. I searched the archives of -current but
I havent found anything of use there.
Thanks.
kaarthik
-------------- next part --------------
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-RC2 #0: Mon Dec 22 07:23:48 GMT 2003
root at wv1u.freebsd.org:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a59000.
Preloaded elf module "/boot/kernel/snd_emu10k1.ko" at 0xc0a59244.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0a592f4.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a593a0.
ACPI APIC Table: <DELL 2400 >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.53GHz (2524.94-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 266813440 (254 MB)
avail memory = 249524224 (237 MB)
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL 2400 > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00feae0
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82845G (845G GMCH) SVGA controller> mem 0xfeb80000-0xfebfffff,0xe8000000-0xefffffff irq 16 at device 2.0 on pci0
agp0: detected 892k stolen memory
agp0: aperture size is 128M
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xff80-0xff9f irq 16 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xff60-0xff7f irq 19 at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xff40-0xff5f irq 18 at device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <simple comms> at device 5.0 (no driver attached)
pci1: <multimedia, audio> at device 6.0 (no driver attached)
pci1: <input device> at device 6.1 (no driver attached)
bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xfe9fe000-0xfe9fffff irq 17 at device 9.0 on pci1
bfe0: Ethernet address: 00:0d:56:53:fe:f4
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0xffa0-0xffaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xfeb7fc00-0xfeb7ffff irq 18 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acpi_cpu1: <CPU> on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
orm0: <Option ROMs> at iomem 0xcd000-0xcffff,0xcb800-0xccfff,0xc0000-0xcb7ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2524937408 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc2e1dc60
ad0: 39205MB <Maxtor 6E040L0> [79656/16/63] at ata0-master UDMA100
acd0: CDRW <HL-DT-ST CD-RW/DVD-ROM GCC-4480B> at ata1-master PIO4
acd0: FAILURE - READ_BIG status=51<READY,DSC,ERROR> sensekey=ILLEGAL REQUEST error=4<ABORTED>
acd0: FAILURE - READ_BIG status=51<READY,DSC,ERROR> sensekey=ILLEGAL REQUEST error=4<ABORTED>
acd0: FAILURE - READ_BIG status=51<READY,DSC,ERROR> sensekey=ILLEGAL REQUEST error=4<ABORTED>
acd0: FAILURE - READ_BIG status=51<READY,DSC,ERROR> sensekey=ILLEGAL REQUEST error=4<ABORTED>
acd0: FAILURE - READ_BIG status=51<READY,DSC,ERROR> sensekey=ILLEGAL REQUEST error=4<ABORTED>
acd0: FAILURE - READ_BIG status=51<READY,DSC,ERROR> sensekey=ILLEGAL REQUEST error=4<ABORTED>
Mounting root from ufs:/dev/ad0s3a
-------------- next part --------------
hostb0 at pci0:0:0: class=0x060000 card=0x01601028 chip=0x25608086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82845G/GL/GV/GE/PE DRAM Controller / Host-Hub I/F Bridge'
class = bridge
subclass = HOST-PCI
agp0 at pci0:2:0: class=0x030000 card=0x01601028 chip=0x25628086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82845G/GL/GV/GE/PE Integrated Graphics Device'
class = display
subclass = VGA
uhci0 at pci0:29:0: class=0x0c0300 card=0x01601028 chip=0x24c28086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB/DBM (ICH4/M) USB UHCI Controller #1'
class = serial bus
subclass = USB
uhci1 at pci0:29:1: class=0x0c0300 card=0x01601028 chip=0x24c48086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB/DBM (ICH4/M) USB UHCI Controller #2'
class = serial bus
subclass = USB
uhci2 at pci0:29:2: class=0x0c0300 card=0x01601028 chip=0x24c78086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB/DBM (ICH4/M) USB UHCI Controller #3'
class = serial bus
subclass = USB
none0 at pci0:29:7: class=0x0c0320 card=0x01601028 chip=0x24cd8086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB/DBM (ICH4/M) USB EHCI Controller'
class = serial bus
subclass = USB
pcib1 at pci0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086 rev=0x81 hdr=0x01
vendor = 'Intel Corporation'
device = '82801BA/CA/DB/EB/ER (ICH2/3/4/5/5R) Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0 at pci0:31:0: class=0x060100 card=0x00000000 chip=0x24c08086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB (ICH4) LPC Interface Bridge'
class = bridge
subclass = PCI-ISA
atapci0 at pci0:31:1: class=0x01018a card=0x01601028 chip=0x24cb8086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB (ICH4) UltraATA/100 EIDE Controller'
class = mass storage
subclass = ATA
none1 at pci0:31:3: class=0x0c0500 card=0x01601028 chip=0x24c38086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB/DBM (ICH4/M) SMBus Controller'
class = serial bus
subclass = SMBus
none2 at pci1:5:0: class=0x070300 card=0x00021028 chip=0x421214e4 rev=0x02 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'BCM V.90 56k Modem'
class = simple comms
none3 at pci1:6:0: class=0x040100 card=0x10031102 chip=0x00061102 rev=0x00 hdr=0x00
vendor = 'Creative Labs'
device = 'emu10k1x Soundblaster Live! 5.1'
class = multimedia
subclass = audio
none4 at pci1:6:1: class=0x098000 card=0x10031102 chip=0x70041102 rev=0x00 hdr=0x00
vendor = 'Creative Labs'
device = 'SBLive! Value Gameport'
class = input device
bfe0 at pci1:9:0: class=0x020000 card=0x81271028 chip=0x440114e4 rev=0x01 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'BCM440x 10/100 Integrated Ethernet Controller'
class = network
subclass = ethernet
More information about the freebsd-current
mailing list