Sony V505BX ATA panic

[Søren Schmidt]

Simon L. Nielsen wrote:

>
> Memory modified after free 0xc4667200(508) val=1000100 @ 0xc4667200
> 
> 
> Fatal trap 12: page fault while in kernel mode
> fault virtual address   = 0x1000120
> fault code              = supervisor read, page not present
> instruction pointer     = 0x8:0xc06627c2
> stack pointer           = 0x10:0xc0c21ba4
> frame pointer           = 0x10:0xc0c21bc0
> code segment            = base 0x0, limit 0xfffff, type 0x1b
>                         = DPL 0, pres 1, def32 1, gran 1
> processor eflags        = interrupt enabled, resume, IOPL = 0
> current process         = 0 (swapper)
> kernel: type 12 trap, code=0
> Stopped at      mtrash_ctor+0x3a:       movl    0x20(%eax),%eax
> db> trace
> mtrash_ctor(c4667200,200,0) at mtrash_ctor+0x3a
> uma_zalloc_arg(c1051cc0,0,1) at uma_zalloc_arg+0x169
> malloc(1a0,c072a4a0,1,c443dd80,c457b3c0) at malloc+0xb7
> xpt_alloc_device(c443dd80,c457b3c0,0) at xpt_alloc_device+0x3e
> xpt_compile_path(c4482bd0,c1985d80,0,2,0) at xpt_compile_path+0x84
> xpt_create_path(c0c21ca4,c1985d80,0,2,0) at xpt_create_path+0x49
> xpt_scan_bus(c1985d80,c4661400,c0c21cf0,c043a51d,c443ddc0) at xpt_scan_bus+0xea
> xpt_action(c4661400,c4661400,c443dd80,c043a030,c0c21d14) at xpt_action+0x7e2
> xpt_finishconfig(c1985d80,c4661400) at xpt_finishconfig+0x30
> xptconfigfunc(c443dd80,0,c0c21d40,c0439e97,c443dd80) at xptconfigfunc+0x10b
> xptdefbusfunc(c443dd80,c0c21d54) at xptdefbusfunc+0x15
> xptbustraverse(0,c043a030,c0c21d54,0,c043d590) at xptbustraverse+0x2b
> xpt_for_all_busses(c043d590,0) at xpt_for_all_busses+0x29
> xpt_config(0) at xpt_config+0x74
> run_interrupt_driven_config_hooks(0,c1ec00,c1e000,0,c0435ad5) at run_interrupt_driven_config_hooks+0x18
> mi_startup() at mi_startup+0x96
> begin() at begin+0x2c
> db> 

Loose atapicam, does it work then ? If so please address the atapicam 
maintainer with the problems ...

-- 
-Søren