Bad interrupt routing causes my SATA controller to fail.

[Johan Pettersson]

1) HTT + ACPI - Hangs with error on ad4
2) no HTT + ACPI - Successful
3) ACPI and no apic (set hint.apic.0.disabled=1 from loader) - Successfull
4) no ACPI (set hint.acpi.0.disabled=1 from loader) - Kernel panic
5) no ACPI and no APIC (set both hints above from loader) - Kernel panic

3, 4, 5 was tested with HTT enabled in BIOS.

> 
> It is probably not bad interrupt routing.  Can you try the following scenarios 
> and tell us which ones work and which ones fail:
> 
> 1) HTT + ACPI
> 2) no HTT + ACPI
> 3) ACPI and no apic (set hint.apic.0.disabled=1 from loader)
> 4) no ACPI (set hint.acpi.0.disabled=1 from loader)
> 5) no ACPI and no APIC (set both hints above from loader)
> 
> -- 
> John Baldwin <jhb at FreeBSD.org>  <><  http://www.FreeBSD.org/~jhb/
> "Power Users Use the Power to Serve"  =  http://www.FreeBSD.org
> 
> _______________________________________________
> freebsd-current at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"
>