5.2 Install CD doesn't detect all scsi drives

[Sven Willenberger]

On Mon, 2004-02-09 at 14:51, Doug White wrote:
> Try this. At the sysinstall menu, hit scroll lock, then arrow up and check
> out the asr probe messages.  It'd be extra neat if you could capture them
> with a serial console.
> 
Having issues outputting to console (minicom on another FreeBSD box)
from the install CD so here is the output I copied instead:

asr0: <ADAPTEC Caching SCSI RAID> mem
0xfc000000-0xfdffffff,0xfb000000-0xfbffffff,0xf8300000-0xf82fffff irq24
at device 1.0 on pci3
asr0: major=154
pcib3: device asr0 requested decoded memory range 0xf8300000-0xf83fffff
pcib1: device asr0 requested decoded memory range 0xf8300000-0xf83fffff
pcib3: device asr0 requested decoded memory range 0xfb000000-0xfb400000
pcib1: device asr0 requested decoded memory range 0xfb000000-0xfb400000
.
.
--other devices listed here
.
.
(probe0:asr0:0:0:0): Data Overrun
(probe0:asr0:0:0:0): Retrying Command
(probe0:asr0:0:0:0): Data Overrun
(probe0:asr0:0:0:0): Retrying Command
(probe0:asr0:0:0:0): Data Overrun
(probe0:asr0:0:0:0): Retrying Command
(probe0:asr0:0:0:0): Data Overrun
(probe0:asr0:0:0:0): Retrying Command
(probe0:asr0:0:0:0): Data Overrun
(probe0:asr0:0:0:0): error 5
(probe0:asr0:0:0:0): Retries Exhausted
pass0 at asr0 bus 1 target 1 lun 0
pass0: <ADAPTEC RAID-5 3B05> Fixed DirectAccess SCSI-2 Device
pass0: Serial Number +
pass0: Tagged Queueing Enabled
GEOM: create disk da0 dp=0xc6fd0850
GEOM: new disk da0
da0 at asr0 bus 1 target 1 lun 0
da0: <ADAPTEC RAID-5 3B05> Fixed DirectAccess SCSI-2 Device
da0: Serial Number +


> Next, hit scroll lock to get the screen back, then go to Fixit, then
> Shell. Run '/stand/camcontrol devlist -v' and paste us the output.  That
> should show the two disk devices.
> 


/stand/camcontrol devlist -v
scbus0 on asr0 bus 0:
<  >			at scbus0 target -1 lun -1 ()
scbus1 on asr0 bus 1:
<ADAPTEC RAID-5 3B05>	at scbus1 target 1 lun 0 (da0,pass0)
<  >			at scbus1 target -1 lun -1 ()
scbus-1 on xpt0
<  >			at scbus-1 target -1 lun -1 (xpt0)


in the above: the lone SCSI drive is the one at asr0 bus 0 and is where
I want the majority of the install to take place. The RAID located on
bus1 is for a data spool.

> Why it can't open the device is curious, and better yet is the bug where
> sysinstall doesn't print errno. :-)
>