sata drive problem

[Evren Yurtesen]

what controller are you using for sata?

Axel Gonzalez wrote:

> Evren Yurtesen wrote:
> 
>>Hello, I have a system which had problems with the following errors 
>>after working perfectly for 2 days. Is there any suggestions about what 
>>can I do about this? else than checking the cables :) I think the drives 
>>work fine also. They were doing pretty fine with another mainboard.
> 
> 
> 
> When under heavy load, i get the error (just tested from a cvsup 09/02/2004 
> src):
> 
> ad4: TIMEOUT - WRITE_DMA retrying (2 retries left)  LBA=...
> ad4: TIMEOUT - WRITE_DMA retrying (2 retries left)  LBA=...
> 
> sometimes it crashes right away, sometimes it waits a little.
> 
> can't get the exact LBA sectors because the system crashes cold, and its not 
> logged (i've seen the error before a crash)
> 
> Using a previous kernel snapshot (around jan 20, 2004), i can work normally, 
> even with heavy loads.
> 
> 
> The relevant system data:
> 
> Feb  9 06:48:06  kernel: ACPI APIC Table: <INTEL  D875BZLK>
> Feb  9 06:48:06 moonlight kernel: CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz 
> (2394.01-MHz 686-class CPU)
> Feb  9 06:48:06 moonlight kernel: Origin = "GenuineIntel"  Id = 0xf29  
> Stepping = 9
> Feb  9 06:48:06 moonlight kernel: 
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,A
> PIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> Feb  9 06:48:06 moonlight kernel: Hyperthreading: 2 logical CPUs
> ...
> 
> Feb  9 06:48:06 moonlight kernel: ata0: at 0x1f0 irq 14 on atapci0
> Feb  9 06:48:06 moonlight kernel: ata0: [MPSAFE]
> Feb  9 06:48:06 moonlight kernel: ata1: at 0x170 irq 15 on atapci0
> Feb  9 06:48:06 moonlight kernel: ata1: [MPSAFE]
> Feb  9 06:48:06 moonlight kernel: atapci1: <Intel ICH5 SATA150 controller> 
> port 0xdc00-0xdc0f,0xe000-0xe003,0xe400-0xe407,0xe800-0xe803,0xec00-0xec07 
> irq 18 at device 31.2 on pci0
> Feb  9 06:48:06 moonlight kernel: atapci1: [MPSAFE]
> Feb  9 06:48:06 moonlight kernel: ata2: at 0xec00 on atapci1
> Feb  9 06:48:06 moonlight kernel: ata2: [MPSAFE]
> Feb  9 06:48:06 moonlight kernel: ata3: at 0xe400 on atapci1
> Feb  9 06:48:06 moonlight kernel: ata3: [MPSAFE]
> Feb  9 06:48:06 moonlight kernel: pci0: <serial bus, SMBus> at device 31.3 (no 
> driver attached)
> 
> ...
> 
> Feb  9 06:48:06 moonlight kernel: GEOM: create disk ad0 dp=0xc44aa160
> Feb  9 06:48:06 moonlight kernel: ad0: 57241MB <ST360020A> [116301/16/63] at 
> ata0-master UDMA100
> Feb  9 06:48:06 moonlight kernel: acd0: CDRW <LITE-ON LTR-52246S> at 
> ata1-master PIO4
> Feb  9 06:48:06 moonlight kernel: GEOM: create disk ad4 dp=0xc459a360
> Feb  9 06:48:06 moonlight kernel: ad4: 78167MB <Maxtor 6Y080M0> [158816/16/63] 
> at ata2-master UDMA100
> Feb  9 06:48:06 moonlight kernel: GEOM: create disk cd0 dp=0xc449d600
> _______________________________________________
> freebsd-current at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"