ATA hangs after reboot on Toshiba Satellite
Markus Oestreicher
m.oe at x-trader.de
Fri Feb 6 09:41:20 PST 2004
Good Day,
I am running a 5.2-CURRENT with a fresh kernel and world
(cvsupped ~2 hours ago) on a Toshiba Satellite 5200-903.
To install and run FreeBSD on that machine I use the known
workaround hw.pci.enable_io_modes=0 in /boot/device.hints.
Otherwise it hangs when probing agp0.
After a cold boot the notebook works fine. But on a warm
boot (e.g. shutdown -r now) the kernel hangs after ata0:
[...]
atapci0: <Intel ICH3 UDMA100 controller> ...
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
The error is reproducable. I assume that the ata controller
is behaving wrong when initialized a second time?
How can we work out this error?
I have attached dmesg from a cold "boot -v".
Markus
-------------- next part --------------
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #0: Fri Feb 6 16:54:37 CET 2004
root at oemobil.gn.qhintra.net:/usr/obj/usr/src/sys/MOBIL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc09a8000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc09a8318.
Calibrating clock(s) ... i8254 clock: 1193243 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2194508844 Hz
CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 2.20GHz (2194.51-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 536657920 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x000000001f69cfff, 514289664 bytes (125559 pages)
avail memory = 515428352 (491 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f0250
bios32: Entry = 0xfb893 (c00fb893) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xcf0c
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=1a308086)
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00f01a0
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 31 A 0x62 3 4 6 7 11
embedded 0 31 B 0x61 3 4 6 7 11
embedded 0 29 A 0x60 3 4 6 7 11
embedded 2 11 A 0x60 3 4 6 7 11
embedded 2 8 A 0x68 3 4 6 7 11
embedded 1 0 A 0x6a 5
embedded 2 10 A 0x6b 3 4 6 7 11
embedded 2 10 B 0x69 3 4 6 7 11
embedded 2 7 A 0x69 3 4 6 7 11
embedded 2 13 A 0x60 3 4 6 7 11
embedded 2 6 A 0x63 3 4 6 7 11
embedded 2 6 B 0x68 3 4 6 7 11
embedded 2 6 C 0x62 3 4 6 7 11
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base e0000000, size 28, enabled
found-> vendor=0x8086, dev=0x1a30, revid=0x04
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1a31, revid=0x04
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2448, revid=0x42
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x248c, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 0000bff8, size 3, enabled
map[14]: type 4, range 32, base 0000bff4, size 2, enabled
map[18]: type 4, range 32, base 0000bfe8, size 3, enabled
map[1c]: type 4, range 32, base 0000bfe4, size 2, enabled
map[20]: type 4, range 32, base 0000bfa0, size 4, enabled
pci_cfgintr_valid: BIOS irq 11 is valid
pci_cfgintr: 0:31 INTA BIOS irq 11
found-> vendor=0x8086, dev=0x248a, revid=0x02
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type 4, range 32, base 00000000, size 8, port disabled
map[14]: type 4, range 32, base 00000000, size 6, port disabled
found-> vendor=0x8086, dev=0x2485, revid=0x02
bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
map[10]: type 4, range 32, base 00000000, size 8, port disabled
map[14]: type 4, range 32, base 00000000, size 7, port disabled
found-> vendor=0x8086, dev=0x2486, revid=0x02
bus=0, slot=31, func=6
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
agp0: <Intel 82845 host to AGP bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 256M
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xfd000000-0xfdffffff
pcib1: prefetched decode 0xd0000000-0xdfffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base fd000000, size 24, enabled
map[14]: type 3, range 32, base d0000000, size 28, enabled
pci_cfgintr_valid: BIOS irq 5 is valid
pci_cfgintr: 1:0 INTA BIOS irq 5
found-> vendor=0x10de, dev=0x031a, revid=0xa1
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 4
pcib2: I/O decode 0xc000-0xcfff
pcib2: memory decode 0xfce00000-0xfcefffff
pcib2: prefetched decode 0xfff00000-0xfffff
pcib2: Subtractively decoded bridge.
pci2: <PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 1, range 32, base fceff000, size 12, enabled
pci_cfgintr_valid: BIOS irq 6 is valid
pci_cfgintr: 2:6 INTA BIOS irq 6
found-> vendor=0x1033, dev=0x0035, revid=0x41
bus=2, slot=6, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
intpin=a, irq=6
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fcefe000, size 12, enabled
pci_cfgintr_valid: BIOS irq 4 is valid
pci_cfgintr: 2:6 INTB BIOS irq 4
found-> vendor=0x1033, dev=0x0035, revid=0x41
bus=2, slot=6, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
intpin=b, irq=4
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x1033, dev=0x00e0, revid=0x02
bus=2, slot=6, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x22 (8500 ns)
intpin=c, irq=255
powerspec 2 supports D0 D1 D2 D3 current D3
found-> vendor=0x104c, dev=0x8023, revid=0x00
bus=2, slot=7, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D3
map[10]: type 1, range 32, base fcefd000, size 12, enabled
map[14]: type 4, range 32, base 0000cf40, size 6, enabled
pci_cfgintr_valid: BIOS irq 4 is valid
pci_cfgintr: 2:8 INTA BIOS irq 4
found-> vendor=0x8086, dev=0x1031, revid=0x42
bus=2, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=4
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x1179, dev=0x0617, revid=0x33
bus=2, slot=11, func=0
class=06-07-00, hdrtype=0x02, mfdev=0
cmdreg=0x0000, statreg=0x0490, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 1 supports D0 D1 D2 D3 current D3
found-> vendor=0x1179, dev=0x0805, revid=0x05
bus=2, slot=13, func=0
class=08-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D3
ohci0: <NEC uPD 9210 USB controller> mem 0xfceff000-0xfcefffff irq 6 at device 6.0 on pci2
pcib2: device ohci0 requested decoded memory range 0xfceff000-0xfcefffff
usb0: OHCI version 1.0
usb0: SMM does not respond, resetting
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ums0: Synaptics Inc. Synaptics cPad, rev 1.10/0.16, addr 2, iclass 3/1
ums0: 3 buttons
ohci1: <NEC uPD 9210 USB controller> mem 0xfcefe000-0xfcefefff irq 4 at device 6.1 on pci2
pcib2: device ohci1 requested decoded memory range 0xfcefe000-0xfcefefff
usb1: OHCI version 1.0
usb1: SMM does not respond, resetting
usb1: <NEC uPD 9210 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci2: <serial bus, USB> at device 6.2 (no driver attached)
fwohci0: <Texas Instruments TSB43AB22/A> at device 7.0 on pci2
fwohci0: latency timer 64 -> 64.
fwohci0: cache size 8 -> 8.
fwohci0: Could not map memory
device_probe_and_attach: fwohci0 attach returned 6
fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0xcf40-0xcf7f mem 0xfcefd000-0xfcefdfff irq 4 at device 8.0 on pci2
pcib2: device fxp0 requested decoded memory range 0xfcefd000-0xfcefdfff
fxp0: using memory space register mapping
fxp0: Ethernet address 00:00:39:db:d5:3d
fxp0: PCI IDs: 8086 1031 1179 0001 0042
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
cbb0: <ToPIC100 PCI-CardBus Bridge> at device 11.0 on pci2
cbb0: chip is in D3 power mode -- setting to D0
pcib2: device cbb0 requested decoded memory range 0x88000000-0xffffffff
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci_cfgintr_virgin: using routable interrupt 4
pci_cfgintr: 2:11 INTA routed to irq 4
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x06171179 0x04900007 0x06070033 0x00024000
0x10: 0x88000000 0x04800080 0x00040402 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc
0x30: 0x00000000 0x0000fffc 0x00000000 0x04000104
0x40: 0x00011179 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0xfe110001 0x00800000 0x00000000 0x01000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x860011f0 0x0c000000 0x00000000 0x0000d100
0xb0: 0x3f3f3fcf 0x0a081020 0x14010100 0x00423f00
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00040000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000008
pci2: <base peripheral> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 0xbfa0-0xbfaf,0xbfe4-0xbfe7,0xbfe8-0xbfef,0xbff4-0xbff7,0xbff8-0xbfff irq 11 at device 31.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1-master: stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata1-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x0
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pci0: <simple comms> at device 31.6 (no driver attached)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xc0000-0xcffff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: cannot reserve interrupt line
fdc0 failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x1 0x1 0x1 0x1
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 2194508844 Hz quality 800
Timecounters tick every 10.000 msec
Linux ELF exec handler installed
IP Filter: v3.4.31 initialized. Default = pass all, Logging = enabled
lo0: bpf attached
pcib2: device pccard0 requested decoded memory range 0x88000000-0xffffffff
pccard0: CIS version PCCARD 2.0 or 2.1
pccard0: CIS info: AVM, ISDN A, !\^B\^F, \^Z\^E\^A\^B
pccard0: Manufacturer code 0xffffffff, product 0xffffffff
pccard0: function 0: network adapter, ccr addr 400 mask 1
pccard0: function 0, config table entry 1: I/O card; irq mask 9cf8; iomask 10, iospace 140-147; io8 irqlevel
pccard0: function 0, config table entry 2: I/O card; irq mask 9cf8; iomask 10, iospace 300-307; io8 irqlevel
pcib2: device pccard0 requested decoded I/O range 0x140-0x147
pcib2: device pccard0 requested decoded memory range 0x88000000-0xffffffff
pccard0: <unknown card> (manufacturer=0xffffffff, product=0xffffffff) at function 0
pccard0: CIS info: AVM, ISDN A, !\^B\^F
ata0-slave: pio=0x0c wdma=0x22 udma=0x42 cable=80pin
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on Intel ICH3 chip
ata0-master: setting UDMA100 on Intel ICH3 chip
ata0-slave: setting PIO4 on Intel ICH3 chip
ad0: <TOSHIBA MK6021GAS/GA024A> ATA-5 disk at ata0-master
ad0: 57231MB (117210240 sectors), 116280 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ar: FreeBSD check1 failed
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:92164842
[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:92164905 l:25045335
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 47188399104 end 47188431359
GEOM: Configure ad0s2, start 47188431360 length 12823211520 end 60011642879
GEOM: Configure ad0s2a, start 0 length 524288000 end 524287999
GEOM: Configure ad0s2b, start 524288000 length 1101004800 end 1625292799
GEOM: Configure ad0s2c, start 0 length 12823211520 end 12823211519
GEOM: Configure ad0s2d, start 1625292800 length 1048576000 end 2673868799
GEOM: Configure ad0s2e, start 2673868800 length 5242880000 end 7916748799
GEOM: Configure ad0s2f, start 7916748800 length 4906462720 end 12823211519
acd0: <TOSHIBA DVD-ROM SD-R6012/1334> DVDR drive at ata0 as slave
acd0: read 4134KB/s (4134KB/s) write 2755KB/s (2755KB/s), 2048KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
More information about the freebsd-current
mailing list