vinum root issue on 5.3-Beta2
Chad Ziccardi
ziccardi at digitalfreaks.org
Tue Aug 31 18:19:14 PDT 2004
just an additional note to this, if I boot it the 1st way, and add a new set
of drives (mirror -n m-usr -v /dev/ad0s1d /dev/ad2s1d) it does that one
correctly, again.. until I reboot using that setup, which the vinumdriveX
associated with /dev/ad2 all show referenced.
begin quote from Chad Ziccardi <ziccardi at digitalfreaks.org> written
2004-08-31:
>
> I'm working on setting up a mirrored root filesystem as explained in:
> http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/vinum-root.html
>
> I've gotten it to boot then noticed something broken about it on my setup.
>
> More info on my setup is at the bottom of this message.
>
> If it boots to the vinum partition it does not properly load vinum.
> How to explain that better..
> booting normal as described in the handbook (loader.conf settings)
> it appears to only read ad0s1h for data, thus never fully comes up.
>
> I get among the various warnings (a slice is missing!)
>
> vinum: incompatible sector sizes. m-root.p1 has 0, m-root has 512. Ignored.
> Mounting root from ufs:/dev/vinum/m-root
> vinum -> ld
> D vinumdrive0 State: up /dev/ad0s1h A: 0/1023 MB (0%)
> D vinumdrive1 State: referenced unknown A: 0/0 MB
> since it can't see vinumdrive1 the plex and subdisks are faulty.
>
>
>
>
> However booting to the a slice without using vinum (removed from loader.conf)
> booted up on ad0s1a(or ad0s1h)(half of the mirror)
>
> then doing vinum start after logging in I get:
>
> vinum: reading configuration from /dev/ad2s1h
> vinum: updating configuration from /dev/ad0s1h
> Aug 31 05:55:06 kernel: vinum: reading configuration from /dev/ad2s1h
> Aug 31 05:55:06 kernel: vinum: updating configuration from /dev/ad0s1h
>
> vinum -> ld
> D vinumdrive1 State: up /dev/ad2s1h A: 0/1023 MB (0%)
> D vinumdrive0 State: up /dev/ad0s1h A: 0/1023 MB (0%)
>
>
>
> Is this a known issue? Is there something wrong with how I've set it up?
>
>
>
>
> info from dmesg:
> ----------------
> FreeBSD 5.3-BETA2 #0: Tue Aug 31 01:21:06 UTC 2004
> root@:/usr/obj/usr/src/sys/ARBITOR
> ...
> ad0: 157066MB <HDS722516VLAT80/V34OA63A> [319120/16/63] at ata0-master UDMA66
> ATAPI_RESET time = 34920us
> ata1-master: DMA limited to UDMA33, non-ATA66 cable or device
> ad2: 157066MB <HDS722516VLAT80/V34OA63A> [319120/16/63] at ata1-master UDMA33
> acd0: CDROM <CD-ROM CDU701/1.0f> at ata1-slave PIO4
>
>
>
> disklabels:
> -----------
> # /dev/ad0s1:
> 8 partitions:
> # size offset fstype [fsize bsize bps/cpg]
> a: 2096871 281 4.2BSD 2048 16384 11761
> b: 4999480 316669952 swap
> c: 321669432 0 unused 0 0 # "raw" part, don't
> edit
> d: 16777216 2097152 4.2BSD 2048 16384 28552
> e: 4194304 18874368 4.2BSD 0 0 0
> f: 188743680 23068672 4.2BSD 0 0 0
> g: 104857600 211812352 4.2BSD 0 0 0
> h: 2097136 16 vinum
>
> # /dev/ad2s1:
> 8 partitions:
> # size offset fstype [fsize bsize bps/cpg]
> a: 2096871 281 4.2BSD 2048 16384 11761
> b: 4999480 316669952 swap
> c: 321669432 0 unused 0 0 # "raw" part, don't
> edit
> d: 16777216 2097152 4.2BSD 2048 16384 28552
> e: 4194304 18874368 4.2BSD 0 0 0
> f: 188743680 23068672 4.2BSD 0 0 0
> g: 104857600 211812352 4.2BSD 0 0 0
> h: 2097136 16 vinum
>
>
>
>
--
Chad Ziccardi, Professional Slacker cz at digitalfreaks.org
"Some cause happiness wherever they go; others whenever they go."
More information about the freebsd-current
mailing list