APIC causes vr0 watchdog timeouts and Interrupt storms
Justin Settle
quaggamail at quaggaspace.org
Sun Aug 29 07:44:02 PDT 2004
On Sat, 2004-08-28 at 21:17, Chris Laverdure wrote:
> On Sun, 2004-08-29 at 04:49, Justin Settle wrote:
> > Hello,
> >
> > I recently installed 5.3-BETA. After booting, I found was unable to use
> > my usb mouse or my ethernet (Via-rhine). I started tinkering with the
> > kernel and found that if I disabled APIC, this system worked without
> > ethernet issues or mouse isssues. After talking with some people they
> > suggested I post boot -v, dmesg's of the different kernels so here they
> > are:
> >
> > The first thing I tried was a GENERIC with SMP commented out. It had
> > the same issues as GENERIC:
> >
> ...
> > ACPI is on both of these kernels but I've tried both without and the
> > results are the same. Should any other information be needed/wanted
> > I'll be sure to reply. Thank you for your time.
> >
> > Jay Settle
> >
>
> I too cannot use my USB mouse with ACPI enabled (yet it works fine
> without it). I get a Interrupt Storm when usbd tries to come up, and
> then moused fails claiming an "Input/Output error on /dev/ums0".
>
> I would love to get to the bottom of this.
>
Just to clarify, my problem isn't with ACPI, its with APIC :). My machine actually works fine with ACPI on (its on at the moment). If I boot it with APIC, however, things go downhill.
Jay Settle
More information about the freebsd-current
mailing list