carbus problem

[M. Warner Losh]

In message: <1082226317.834.12.camel at zarcon.homeunix.net>
            Francisco Alves Cabrita <francisco at nortenet.pt> writes:
: hello
: i'm running (i386)5-CURRENT and in this "nightly" buildwold ,, my
: cardbus (ethernet pcmcia ovislink chipset rl) didnt get enabled""
: 
: 
: this was the message during boot:
: 
: cbb0: <ToPIC95B PCI-CardBus Bridge> irq 11 at device 11.0 on pci0
: cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0
: cardbus0: <CardBus bus> on cbb0
: pccard0: <16-bit PCCard bus> on cbb0
: cbb0: bad Vcc request. ctrl=0xf000ef08, status=0xf000e2c3
: cbb_power: 0V
: cbb1: <ToPIC95B PCI-CardBus Bridge> irq 11 at device 11.1 on pci0
: cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x1000
: cardbus1: <CardBus bus> on cbb1
: pccard1: <16-bit PCCard bus> on cbb1
: cbb1: bad Vcc request. ctrl=0x7720700, status=0x76f076c
: cbb_power: 0V
: 
: can some one give a tip !!! 

Please submit an older, working dmesg.  I think I know what's going
on, but w/o that, I can't be sure.

Since the cbb is on pci0, I think that you might have an non-ACPI
system.  Especially since the ToPIC95B is a relatively old chip.  My
guess is that this is a 100-166MHz Pentium system.

Warner