HEADS UP: PCI Chnages

Masahide -mac- NODA mac at clave.gr.jp
Thu Apr 15 06:23:15 PDT 2004


Hi, Warner-san.

From: "M. Warner Losh" <imp at bsdimp.com>
Subject: HEADS UP: PCI Chnages
Date: Fri, 09 Apr 2004 09:56:35 -0600 (MDT)
Message-ID: <20040409.095635.32718566.imp at bsdimp.com>

imp> I just committed some rather extensive changes to the pci bus layer.
imp> These changes should help people that need better suspend/resume
imp> support, better resource allocation and resource collision avoidance.

After your cmmits, my note pc's cbb does not work. 

I attach 2 dmesgs, one is working fine case(cvsuped at 2004/04/08), and
the other is not working case(cvsuped at 2004/04/15).

at working fine case, cbb0 use memory resource start 0x88000000, but not
working case, using memory start 0xd0200000.

I notice that not working case(dmesg.boot.040415) is similar to 'set
allow_unsupported_io_range=0' case before it option is exsist. My note
PC's cbb device need to set 'allow_unsupported_io_range=1'.

-- 
mac at clave.gr.jp/mac at jp.freebsd.org

-------------- next part --------------
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #0: Thu Apr  8 11:29:59 JST 2004
    mac at stlas:/usr/obj/usr/src/sys/STLAS
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0836000.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc08362bc.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0836368.
Preloaded elf module "/boot/kernel/if_ath.ko" at 0xc0836414.
Preloaded elf module "/boot/kernel/wlan.ko" at 0xc08364c0.
Preloaded elf module "/boot/kernel/rc4.ko" at 0xc083656c.
Preloaded elf module "/boot/kernel/ath_hal.ko" at 0xc0836614.
Preloaded elf module "/boot/kernel/firewire.ko" at 0xc08366c0.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0836770.
Calibrating clock(s) ... i8254 clock: 1193192 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 999972441 Hz
CPU: Intel(R) Pentium(R) M processor 1000MHz (999.97-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x695  Stepping = 5
  Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory  = 527368192 (502 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c29000 - 0x000000001ede7fff, 505147392 bytes (123327 pages)
avail memory = 506310656 (482 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f58d0
bios32: Entry = 0xfd750 (c00fd750)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xfd750+0x262
pnpbios: Found PnP BIOS data at 0xc00f5950
pnpbios: Entry = f0000:a5bc  Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
null: <null device, zero device>
random: <entropy source>
ath_hal: <Atheros Hardware Access Layer>version 0.9.6.3
ACPI: Overriding _OS definition with "Windows 2001"
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <FUJ FJNB16E> on motherboard
acpi0: [GIANT-LOCKED]
pci_open(1):	mode 1 addr port (0x0cf8) is 0x8000f904
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=80] is there (id=35808086)
pcibios: BIOS version 2.10
Found $PIR table, 9 entries at 0xc00fdf30
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
embedded    0    2    A   0x60  3 4 5 7 9 10 11
embedded    0   29    A   0x60  3 4 5 7 9 10 11
embedded    0   29    B   0x63  3 4 5 7 9 10 11
embedded    0   29    C   0x62  3 4 5 7 9 10 11
embedded    0   29    D   0x6b  3 4 5 7 9 10 11
embedded    0   30    A   0x60  3 4 5 7 9 10 11
embedded    0   30    B   0x61  3 4 5 7 9 10 11
embedded    0   30    C   0x62  3 4 5 7 9 10 11
embedded    0   30    D   0x63  3 4 5 7 9 10 11
embedded    0   31    A   0x62  3 4 5 7 9 10 11
embedded    0   31    B   0x61  3 4 5 7 9 10 11
embedded    1   12    A   0x68  3 4 5 7 9 10 11
embedded    1   13    A   0x62  3 4 5 7 9 10 11
embedded    1   13    B   0x63  3 4 5 7 9 10 11
embedded    1   14    A   0x69  3 4 5 7 9 10 11
embedded    1   10    A   0x60  3 4 5 7 9 10 11
embedded    1   10    B   0x61  3 4 5 7 9 10 11
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
AcpiOsDerivePciId: bus 0 dev 0 func 0
AcpiOsDerivePciId: bus 0 dev 0 func 1
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfc08-0xfc0b on acpi0
acpi_cpu0: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.PCI0.LPC0.LNKA irq  11: [  3  4  5  7  9 10 11] low,level,sharable 0.2.0
\\_SB_.PCI0.LPC0.LNKA irq  11: [  3  4  5  7  9 10 11] low,level,sharable 0.29.0
\\_SB_.PCI0.LPC0.LNKD irq  11: [  3  4  5  7  9 10 11] low,level,sharable 0.29.1
\\_SB_.PCI0.LPC0.LNKC irq  11: [  3  4  5  7  9 10 11] low,level,sharable 0.29.2
\\_SB_.PCI0.LPC0.LNKH irq  11: [  3  4  5  7  9 10 11] low,level,sharable 0.29.3
\\_SB_.PCI0.LPC0.LNKC irq  11: [  3  4  5  7  9 10 11] low,level,sharable 0.31.0
\\_SB_.PCI0.LPC0.LNKB irq  11: [  3  4  5  7  9 10 11] low,level,sharable 0.31.1
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.LPC0.LNKA irq  11: [  3  4  5  7  9 10 11] low,level,sharable 0.2.0
\\_SB_.PCI0.LPC0.LNKA irq  11: [  3  4  5  7  9 10 11] low,level,sharable 0.29.0
\\_SB_.PCI0.LPC0.LNKD irq  11: [  3  4  5  7  9 10 11] low,level,sharable 0.29.1
\\_SB_.PCI0.LPC0.LNKC irq  11: [  3  4  5  7  9 10 11] low,level,sharable 0.29.2
\\_SB_.PCI0.LPC0.LNKH irq  11: [  3  4  5  7  9 10 11] low,level,sharable 0.29.3
\\_SB_.PCI0.LPC0.LNKC irq  11: [  3  4  5  7  9 10 11] low,level,sharable 0.31.0
\\_SB_.PCI0.LPC0.LNKB irq  11: [  3  4  5  7  9 10 11] low,level,sharable 0.31.1
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base 00000000, size  0, enabled
found->	vendor=0x8086, dev=0x3580, revid=0x02
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3584, revid=0x02
	bus=0, slot=0, func=1
	class=08-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3585, revid=0x02
	bus=0, slot=0, func=3
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 3, range 32, base d8000000, size 27, enabled
	map[14]: type 1, range 32, base d0000000, size 19, enabled
	map[18]: type 4, range 32, base 00001800, size  3, enabled
pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.LPC0.LNKA)
pcib0: slot 2 INTA is routed to irq 11
found->	vendor=0x8086, dev=0x3582, revid=0x02
	bus=0, slot=2, func=0
	class=03-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 1  supports D0 D1 D3  current D0
	map[10]: type 3, range 32, base e0000000, size 27, enabled
	map[14]: type 1, range 32, base d0080000, size 19, enabled
found->	vendor=0x8086, dev=0x3582, revid=0x02
	bus=0, slot=2, func=1
	class=03-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 1  supports D0 D1 D3  current D0
	map[20]: type 4, range 32, base 00001820, size  5, enabled
pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LPC0.LNKA)
pcib0: slot 29 INTA is routed to irq 11
found->	vendor=0x8086, dev=0x24c2, revid=0x03
	bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[20]: type 4, range 32, base 00001840, size  5, enabled
pcib0: matched entry for 0.29.INTB (src \\_SB_.PCI0.LPC0.LNKD)
pcib0: slot 29 INTB is routed to irq 11
found->	vendor=0x8086, dev=0x24c4, revid=0x03
	bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[10]: type 1, range 32, base d0100000, size 10, enabled
pcib0: matched entry for 0.29.INTD (src \\_SB_.PCI0.LPC0.LNKH)
pcib0: slot 29 INTD is routed to irq 11
found->	vendor=0x8086, dev=0x24cd, revid=0x03
	bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x8086, dev=0x2448, revid=0x83
	bus=0, slot=30, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x24cc, revid=0x03
	bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 4, range 32, base 00000000, size  3, enabled
	map[14]: type 4, range 32, base 00000000, size  2, enabled
	map[18]: type 4, range 32, base 00000000, size  3, enabled
	map[1c]: type 4, range 32, base 00000000, size  2, enabled
	map[20]: type 4, range 32, base 00001810, size  4, enabled
found->	vendor=0x8086, dev=0x24ca, revid=0x03
	bus=0, slot=31, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	map[20]: type 4, range 32, base 00001860, size  5, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LPC0.LNKB)
pcib0: slot 31 INTB is routed to irq 11
found->	vendor=0x8086, dev=0x24c3, revid=0x03
	bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[10]: type 4, range 32, base 00001c00, size  8, enabled
	map[14]: type 4, range 32, base 00001880, size  6, enabled
	map[18]: type 1, range 32, base d0100c00, size  9, enabled
	map[1c]: type 1, range 32, base d0100800, size  8, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LPC0.LNKB)
pcib0: slot 31 INTB is routed to irq 11
found->	vendor=0x8086, dev=0x24c5, revid=0x03
	bus=0, slot=31, func=5
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 00002400, size  8, enabled
	map[14]: type 4, range 32, base 00002000, size  7, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LPC0.LNKB)
pcib0: slot 31 INTB is routed to irq 11
found->	vendor=0x8086, dev=0x24c6, revid=0x03
	bus=0, slot=31, func=6
	class=07-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
pci0: <base peripheral> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 0.3 (no driver attached)
agp0: <Intel 8285xM (85xGM GMCH) SVGA controller> port 0x1800-0x1807 mem 0xd0000000-0xd007ffff,0xd8000000-0xdfffffff irq 11 at device 2.0 on pci0
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
pci0: <display> at device 2.1 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1820-0x183f irq 11 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1840-0x185f irq 11 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd0100000-0xd01003ff irq 11 at device 29.7 on pci0
ehci0: (New EHCI DeviceId=0x24cd8086)
ehci0: [GIANT-LOCKED]
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: (0x8086) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   3
pcib1:   I/O decode        0x3000-0x3fff
pcib1:   memory decode     0xd0200000-0xd02fffff
pcib1:   prefetched decode 0xfff00000-0xfffff
pcib1:   Subtractively decoded bridge.
---- initial configuration ------------------------
\\_SB_.PCI0.LPC0.LNKA irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.9.0
\\_SB_.PCI0.LPC0.LNKB irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.9.1
\\_SB_.PCI0.LPC0.LNKC irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.9.2
\\_SB_.PCI0.LPC0.LNKD irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.9.3
\\_SB_.PCI0.LPC0.LNKA irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.10.0
\\_SB_.PCI0.LPC0.LNKB irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.10.1
\\_SB_.PCI0.LPC0.LNKE irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.12.0
\\_SB_.PCI0.LPC0.LNKC irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.13.0
\\_SB_.PCI0.LPC0.LNKD irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.13.1
\\_SB_.PCI0.LPC0.LNKF irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.14.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.LPC0.LNKA irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.9.0
\\_SB_.PCI0.LPC0.LNKB irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.9.1
\\_SB_.PCI0.LPC0.LNKC irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.9.2
\\_SB_.PCI0.LPC0.LNKD irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.9.3
\\_SB_.PCI0.LPC0.LNKA irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.10.0
\\_SB_.PCI0.LPC0.LNKB irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.10.1
\\_SB_.PCI0.LPC0.LNKE irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.12.0
\\_SB_.PCI0.LPC0.LNKC irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.13.0
\\_SB_.PCI0.LPC0.LNKD irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.13.1
\\_SB_.PCI0.LPC0.LNKF irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.14.0
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
pcib1: matched entry for 1.10.INTA (src \\_SB_.PCI0.LPC0.LNKA)
pcib1: slot 10 INTA is routed to irq 11
found->	vendor=0x1217, dev=0x7223, revid=0x00
	bus=1, slot=10, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0007, statreg=0x0410, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
pcib1: matched entry for 1.10.INTA (src \\_SB_.PCI0.LPC0.LNKA)
pcib1: slot 10 INTA is routed to irq 11
found->	vendor=0x1217, dev=0x7223, revid=0x00
	bus=1, slot=10, func=1
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0007, statreg=0x0410, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base d0214000, size 12, enabled
pcib1: matched entry for 1.10.INTA (src \\_SB_.PCI0.LPC0.LNKA)
pcib1: slot 10 INTA is routed to irq 11
found->	vendor=0x1217, dev=0x7110, revid=0x00
	bus=1, slot=10, func=2
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0103, statreg=0x0410, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
found->	vendor=0x1217, dev=0x7223, revid=0x00
	bus=1, slot=10, func=3
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0080, statreg=0x0410, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 00003000, size  8, enabled
	map[14]: type 1, range 32, base d0215000, size  8, enabled
pcib1: matched entry for 1.12.INTA (src \\_SB_.PCI0.LPC0.LNKE)
pcib1: slot 12 INTA is routed to irq 11
found->	vendor=0x10ec, dev=0x8139, revid=0x10
	bus=1, slot=12, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base d0200000, size 16, enabled
pcib1: matched entry for 1.13.INTA (src \\_SB_.PCI0.LPC0.LNKC)
pcib1: slot 13 INTA is routed to irq 11
found->	vendor=0x168c, dev=0x0013, revid=0x01
	bus=1, slot=13, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0116, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type 1, range 32, base d0215800, size 11, enabled
	map[14]: type 1, range 32, base d0210000, size 14, enabled
pcib1: matched entry for 1.14.INTA (src \\_SB_.PCI0.LPC0.LNKF)
pcib1: slot 14 INTA is routed to irq 11
found->	vendor=0x104c, dev=0x8026, revid=0x00
	bus=1, slot=14, func=0
	class=0c-00-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0116, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
cbb0: <PCI-CardBus Bridge> irq 11 at device 10.0 on pci1
pcib1: device cbb0 requested decoded memory range 0x88000000-0xffffffff
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
  0x00: 0x72231217 0x04100007 0x06070000 0x00824000 
  0x10: 0x88000000 0x020000a0 0x20020201 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd 
  0x30: 0x00000001 0x0000fffd 0x00000001 0x0400010b 
  0x40: 0x11c410cf 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x90: 0x0c0023bf 0x84420bea 0x044c0008 0x10151005 
  0xa0: 0xfe020001 0x00c04000 0x00000000 0x00000000 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00050000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
cbb1: <PCI-CardBus Bridge> irq 11 at device 10.1 on pci1
pcib1: device cbb1 requested decoded memory range 0x88000000-0xffffffff
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
  0x00: 0x72231217 0x04100007 0x06070000 0x00824000 
  0x10: 0x88001000 0x020000a0 0x20030301 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd 
  0x30: 0x00000001 0x0000fffd 0x00000001 0x0400010b 
  0x40: 0x11c410cf 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x90: 0x0c0023bf 0x84420bea 0x044c0008 0x10151005 
  0xa0: 0xfe020001 0x00c04000 0x00000000 0x00000000 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
pci1: <base peripheral> at device 10.2 (no driver attached)
cbb2: <PCI-CardBus Bridge> at device 10.3 on pci1
pcib1: device cbb2 requested decoded memory range 0x88000000-0xffffffff
cardbus2: <CardBus bus> on cbb2
pccard2: <16-bit PCCard bus> on cbb2
pcib1: matched entry for 1.10.INTA (src \\_SB_.PCI0.LPC0.LNKA)
pcib1: slot 10 INTA is routed to irq 11
cbb2: [MPSAFE]
cbb2: PCI Configuration space:
  0x00: 0x72231217 0x04100087 0x06070000 0x00822000 
  0x10: 0x88002000 0x020000a0 0x20000000 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd 
  0x30: 0x00000001 0x0000fffd 0x00000001 0x0400010b 
  0x40: 0x11c410cf 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x90: 0x0c0023bf 0x84420bea 0x004c0008 0x10151005 
  0xa0: 0xfe020001 0x00c04000 0x00000000 0x00000000 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
pcib1: device rl0 requested decoded I/O range 0x3000-0x30ff
rl0: <RealTek 8139 10/100BaseTX> port 0x3000-0x30ff mem 0xd0215000-0xd02150ff irq 11 at device 12.0 on pci1
pcib1: device rl0 requested decoded I/O range 0x3000-0x30ff
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:0b:5d:25:b3:ea
rl0: [GIANT-LOCKED]
ath0: <Atheros 5212> mem 0xd0200000-0xd020ffff irq 11 at device 13.0 on pci1
pcib1: device ath0 requested decoded memory range 0xd0200000-0xd020ffff
ath0: [GIANT-LOCKED]
ath0: mac 5.6 phy 4.1 5ghz radio 4.6
ath0: unable to collect channel list from hal
device_probe_and_attach: ath0 attach returned 22
fwohci0: vendor=104c, dev=8026
fwohci0: <1394 Open Host Controller Interface> mem 0xd0210000-0xd0213fff,0xd0215800-0xd0215fff irq 11 at device 14.0 on pci1
fwohci0: latency timer 64 -> 64.
fwohci0: cache size 8 -> 8.
pcib1: device fwohci0 requested decoded memory range 0xd0215800-0xd0215fff
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:00:0e:10:01:72:53:33
fwohci0: resetting OHCI...done (loop=0)
fwohci0: fwphy_rddata: 0x2 loop=0, retry=0
fwohci0: fwphy_rddata: 0x3 loop=0, retry=0
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: fwphy_rddata: 0x5 loop=0, retry=0
fwohci0: Enable 1394a Enhancements
fwohci0: fwphy_rddata: 0x5 loop=0, retry=0
fwohci0: fwphy_rddata: 0x2 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: BUS_OPT 0xa002 -> 0xf800a002
fwohci0: fwohci_set_intr: 1
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: 0x1 loop=0, retry=0
fwohci0: fwphy_rddata: 0x1 loop=0, retry=0
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fwohci0: fw_set_bus_manager: 0->0 (loop=0)
firewire0: bus manager 0 (me)
send phy_config root_node=-1 gap_count=5
fwohci0: maxdesc: 2
fwohci0: start AT DMA status=0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1810-0x181f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
ichsmb0: <Intel 82801DC (ICH4) SMBus controller> port 0x1860-0x187f irq 11 at device 31.3 on pci0
ichsmb0: [GIANT-LOCKED]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
pcm0: <Intel ICH4 (82801DB)> port 0x1880-0x18bf,0x1c00-0x1cff mem 0xd0100800-0xd01008ff,0xd0100c00-0xd0100dff irq 11 at device 31.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC202 AC97 Codec (id = 0x414c4740)>
pcm0: Codec features headphone, 20 bit DAC, 18 bit ADC, 6 bit master volume, Realtek 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, double rate PCM, reserved 1, AMAP, reserved 4
pcm0: sndbuf_setmap 31c000, 4000; 0xe01d2000 -> 31c000
pcm0: sndbuf_setmap 320000, 4000; 0xe01d6000 -> 320000
pci0: <simple comms> at device 31.6 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
psmcpnp0 irq 12 on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
cpu0 on motherboard
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xdc000-0xdffff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 999972441 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
Current DB 0
ch = 0
 Current OP   KEY INT BR   len     Addr   Depend Stat: Cnt
1eb7b000 OUTL ST2 ALL ALL    12 00000000 1eb7b080 8411:000f RUN,ACTIVE, ack complete(11)
0x000000e0 0x00450000 0xffbaffff 0x00000000
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acpi_cmbat0: battery initialization start
acpi_cmbat0: battery initialization done, tried 1 times
acpi_cmbat1: battery initialization start
acpi_cmbat1: battery initialization done, tried 1 times
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on Intel ICH4 chip
ata0-master: setting UDMA100 on Intel ICH4 chip
ad0: <FUJITSU MHT2060AT/0022> ATA-6 disk at ata0-master
ad0: 57231MB (117210240 sectors), 116280 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
pcm0: measured ac97 link rate at 48015 Hz, will use 48000 Hz
GEOM: new disk ad0
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:96229287
[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:96229350 l:20980890
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 49269394944 end 49269427199
GEOM: Configure ad0s2, start 49269427200 length 10742215680 end 60011642879
bus_explore done
GEOM: Configure ad0s2a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s2b, start 268435456 length 1028431872 end 1296867327
GEOM: Configure ad0s2c, start 0 length 10742215680 end 10742215679
GEOM: Configure ad0s2d, start 1296867328 length 268435456 end 1565302783
GEOM: Configure ad0s2e, start 1565302784 length 268435456 end 1833738239
GEOM: Configure ad0s2f, start 1833738240 length 8908477440 end 10742215679
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
-------------- next part --------------
Preloaded elf module "/boot/kernel/if_ath.ko" at 0xc0838414.
Preloaded elf module "/boot/kernel/wlan.ko" at 0xc08384c0.
Preloaded elf module "/boot/kernel/rc4.ko" at 0xc083856c.
Preloaded elf module "/boot/kernel/ath_hal.ko" at 0xc0838614.
Preloaded elf module "/boot/kernel/firewire.ko" at 0xc08386c0.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0838770.
Calibrating clock(s) ... i8254 clock: 1193191 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 999970205 Hz
CPU: Intel(R) Pentium(R) M processor 1000MHz (999.97-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x695  Stepping = 5
  Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory  = 527368192 (502 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c29000 - 0x000000001ede7fff, 505147392 bytes (123327 pages)
avail memory = 506318848 (482 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f58d0
bios32: Entry = 0xfd750 (c00fd750)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xfd750+0x262
pnpbios: Found PnP BIOS data at 0xc00f5950
pnpbios: Entry = f0000:a5bc  Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
ath_hal: <Atheros Hardware Access Layer>version 0.9.6.3
ACPI: Overriding _OS definition with "Windows 2001"
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <FUJ FJNB16E> on motherboard
acpi0: [GIANT-LOCKED]
pci_open(1):	mode 1 addr port (0x0cf8) is 0x8000f904
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=80] is there (id=35808086)
pcibios: BIOS version 2.10
Found $PIR table, 9 entries at 0xc00fdf30
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
embedded    0    2    A   0x60  3 4 5 7 9 10 11
embedded    0   29    A   0x60  3 4 5 7 9 10 11
embedded    0   29    B   0x63  3 4 5 7 9 10 11
embedded    0   29    C   0x62  3 4 5 7 9 10 11
embedded    0   29    D   0x6b  3 4 5 7 9 10 11
embedded    0   30    A   0x60  3 4 5 7 9 10 11
embedded    0   30    B   0x61  3 4 5 7 9 10 11
embedded    0   30    C   0x62  3 4 5 7 9 10 11
embedded    0   30    D   0x63  3 4 5 7 9 10 11
embedded    0   31    A   0x62  3 4 5 7 9 10 11
embedded    0   31    B   0x61  3 4 5 7 9 10 11
embedded    1   12    A   0x68  3 4 5 7 9 10 11
embedded    1   13    A   0x62  3 4 5 7 9 10 11
embedded    1   13    B   0x63  3 4 5 7 9 10 11
embedded    1   14    A   0x69  3 4 5 7 9 10 11
embedded    1   10    A   0x60  3 4 5 7 9 10 11
embedded    1   10    B   0x61  3 4 5 7 9 10 11
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
AcpiOsDerivePciId: bus 0 dev 0 func 0
AcpiOsDerivePciId: bus 0 dev 0 func 1
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfc08-0xfc0b on acpi0
acpi_cpu0: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
\\_SB_.PCI0.LPC0.LNKA irq  11: [  3  4  5  7  9 10 11] low,level,sharable 0.2.0
\\_SB_.PCI0.LPC0.LNKA irq  11: [  3  4  5  7  9 10 11] low,level,sharable 0.29.0
\\_SB_.PCI0.LPC0.LNKD irq  11: [  3  4  5  7  9 10 11] low,level,sharable 0.29.1
\\_SB_.PCI0.LPC0.LNKC irq  11: [  3  4  5  7  9 10 11] low,level,sharable 0.29.2
\\_SB_.PCI0.LPC0.LNKH irq  11: [  3  4  5  7  9 10 11] low,level,sharable 0.29.3
\\_SB_.PCI0.LPC0.LNKC irq  11: [  3  4  5  7  9 10 11] low,level,sharable 0.31.0
\\_SB_.PCI0.LPC0.LNKB irq  11: [  3  4  5  7  9 10 11] low,level,sharable 0.31.1
ACPI PCI link before setting link priority:
ACPI PCI link before fixup for boot-disabled links:
ACPI PCI link after fixup for boot-disabled links:
ACPI PCI link arbitrated configuration:
\\_SB_.PCI0.LPC0.LNKA irq  11: [  3  4  5  7  9 10 11] low,level,sharable 0.2.0
\\_SB_.PCI0.LPC0.LNKA irq  11: [  3  4  5  7  9 10 11] low,level,sharable 0.29.0
\\_SB_.PCI0.LPC0.LNKD irq  11: [  3  4  5  7  9 10 11] low,level,sharable 0.29.1
\\_SB_.PCI0.LPC0.LNKC irq  11: [  3  4  5  7  9 10 11] low,level,sharable 0.29.2
\\_SB_.PCI0.LPC0.LNKH irq  11: [  3  4  5  7  9 10 11] low,level,sharable 0.29.3
\\_SB_.PCI0.LPC0.LNKC irq  11: [  3  4  5  7  9 10 11] low,level,sharable 0.31.0
\\_SB_.PCI0.LPC0.LNKB irq  11: [  3  4  5  7  9 10 11] low,level,sharable 0.31.1
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found->	vendor=0x8086, dev=0x3580, revid=0x02
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3584, revid=0x02
	bus=0, slot=0, func=1
	class=08-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3585, revid=0x02
	bus=0, slot=0, func=3
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 3, range 32, base d8000000, size 27, enabled
	map[14]: type 1, range 32, base d0000000, size 19, enabled
	map[18]: type 4, range 32, base 00001800, size  3, enabled
pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.LPC0.LNKA)
pcib0: slot 2 INTA is routed to irq 11
found->	vendor=0x8086, dev=0x3582, revid=0x02
	bus=0, slot=2, func=0
	class=03-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 1  supports D0 D1 D3  current D0
	map[10]: type 3, range 32, base e0000000, size 27, enabled
	map[14]: type 1, range 32, base d0080000, size 19, enabled
found->	vendor=0x8086, dev=0x3582, revid=0x02
	bus=0, slot=2, func=1
	class=03-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 1  supports D0 D1 D3  current D0
	map[20]: type 4, range 32, base 00001820, size  5, enabled
pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LPC0.LNKA)
pcib0: slot 29 INTA is routed to irq 11
found->	vendor=0x8086, dev=0x24c2, revid=0x03
	bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[20]: type 4, range 32, base 00001840, size  5, enabled
pcib0: matched entry for 0.29.INTB (src \\_SB_.PCI0.LPC0.LNKD)
pcib0: slot 29 INTB is routed to irq 11
found->	vendor=0x8086, dev=0x24c4, revid=0x03
	bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[10]: type 1, range 32, base d0100000, size 10, enabled
pcib0: matched entry for 0.29.INTD (src \\_SB_.PCI0.LPC0.LNKH)
pcib0: slot 29 INTD is routed to irq 11
found->	vendor=0x8086, dev=0x24cd, revid=0x03
	bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x8086, dev=0x2448, revid=0x83
	bus=0, slot=30, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x24cc, revid=0x03
	bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 4, range 32, base 00000000, size  3, enabled
	map[14]: type 4, range 32, base 00000000, size  2, enabled
	map[18]: type 4, range 32, base 00000000, size  3, enabled
	map[1c]: type 4, range 32, base 00000000, size  2, enabled
	map[20]: type 4, range 32, base 00001810, size  4, enabled
	map[24]: type 1, range 32, base 00000000, size 10, memory disabled
found->	vendor=0x8086, dev=0x24ca, revid=0x03
	bus=0, slot=31, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	map[20]: type 4, range 32, base 00001860, size  5, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LPC0.LNKB)
pcib0: slot 31 INTB is routed to irq 11
found->	vendor=0x8086, dev=0x24c3, revid=0x03
	bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[10]: type 4, range 32, base 00001c00, size  8, enabled
	map[14]: type 4, range 32, base 00001880, size  6, enabled
	map[18]: type 1, range 32, base d0100c00, size  9, enabled
	map[1c]: type 1, range 32, base d0100800, size  8, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LPC0.LNKB)
pcib0: slot 31 INTB is routed to irq 11
found->	vendor=0x8086, dev=0x24c5, revid=0x03
	bus=0, slot=31, func=5
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 00002400, size  8, enabled
	map[14]: type 4, range 32, base 00002000, size  7, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LPC0.LNKB)
pcib0: slot 31 INTB is routed to irq 11
found->	vendor=0x8086, dev=0x24c6, revid=0x03
	bus=0, slot=31, func=6
	class=07-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
pci0: <base peripheral> at device 0.1 (no driver attached)
pci0:0:1: Transition from D0 to D3
pci0: <base peripheral> at device 0.3 (no driver attached)
pci0:0:3: Transition from D0 to D3
agp0: <Intel 8285xM (85xGM GMCH) SVGA controller> port 0x1800-0x1807 mem 0xd0000000-0xd007ffff,0xd8000000-0xdfffffff irq 11 at device 2.0 on pci0
agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xd8000000
agp0: Reserved 0x80000 bytes for rid 0x14 type 3 at 0xd0000000
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
pci0: <display> at device 2.1 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1820-0x183f irq 11 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: FOCUS FH-600 HUB, class 9/0, rev 1.10/4.00, addr 2
uhub1: 6 ports with 6 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1840-0x185f irq 11 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd0100000-0xd01003ff irq 11 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd0100000
ehci0: (New EHCI DeviceId=0x24cd8086)
ehci0: [GIANT-LOCKED]
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub3: (0x8086) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 4 ports with 4 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   3
pcib1:   I/O decode        0x3000-0x3fff
pcib1:   memory decode     0xd0200000-0xd02fffff
pcib1:   prefetched decode 0xfff00000-0xfffff
pcib1:   Subtractively decoded bridge.
ACPI PCI link initial configuration:
\\_SB_.PCI0.LPC0.LNKA irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.9.0
\\_SB_.PCI0.LPC0.LNKB irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.9.1
\\_SB_.PCI0.LPC0.LNKC irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.9.2
\\_SB_.PCI0.LPC0.LNKD irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.9.3
\\_SB_.PCI0.LPC0.LNKA irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.10.0
\\_SB_.PCI0.LPC0.LNKB irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.10.1
\\_SB_.PCI0.LPC0.LNKE irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.12.0
\\_SB_.PCI0.LPC0.LNKC irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.13.0
\\_SB_.PCI0.LPC0.LNKD irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.13.1
\\_SB_.PCI0.LPC0.LNKF irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.14.0
ACPI PCI link before setting link priority:
ACPI PCI link before fixup for boot-disabled links:
ACPI PCI link after fixup for boot-disabled links:
ACPI PCI link arbitrated configuration:
\\_SB_.PCI0.LPC0.LNKA irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.9.0
\\_SB_.PCI0.LPC0.LNKB irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.9.1
\\_SB_.PCI0.LPC0.LNKC irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.9.2
\\_SB_.PCI0.LPC0.LNKD irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.9.3
\\_SB_.PCI0.LPC0.LNKA irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.10.0
\\_SB_.PCI0.LPC0.LNKB irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.10.1
\\_SB_.PCI0.LPC0.LNKE irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.12.0
\\_SB_.PCI0.LPC0.LNKC irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.13.0
\\_SB_.PCI0.LPC0.LNKD irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.13.1
\\_SB_.PCI0.LPC0.LNKF irq  11: [  3  4  5  7  9 10 11] low,level,sharable 1.14.0
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 1, range 32, base 00000000, size 12, enabled
pcib1: matched entry for 1.10.INTA (src \\_SB_.PCI0.LPC0.LNKA)
pcib1: slot 10 INTA is routed to irq 11
found->	vendor=0x1217, dev=0x7223, revid=0x00
	bus=1, slot=10, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0007, statreg=0x0410, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base 00000000, size 12, enabled
pcib1: matched entry for 1.10.INTA (src \\_SB_.PCI0.LPC0.LNKA)
pcib1: slot 10 INTA is routed to irq 11
found->	vendor=0x1217, dev=0x7223, revid=0x00
	bus=1, slot=10, func=1
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0007, statreg=0x0410, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base d0214000, size 12, enabled
pcib1: device (null) requested decoded memory range 0xd0214000-0xd0214fff
pcib1: matched entry for 1.10.INTA (src \\_SB_.PCI0.LPC0.LNKA)
pcib1: slot 10 INTA is routed to irq 11
found->	vendor=0x1217, dev=0x7110, revid=0x00
	bus=1, slot=10, func=2
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0103, statreg=0x0410, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base 00000000, size 12, memory disabled
found->	vendor=0x1217, dev=0x7223, revid=0x00
	bus=1, slot=10, func=3
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0080, statreg=0x0410, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 00003000, size  8, enabled
pcib1: device (null) requested decoded I/O range 0x3000-0x30ff
	map[14]: type 1, range 32, base d0215000, size  8, enabled
pcib1: device (null) requested decoded memory range 0xd0215000-0xd02150ff
pcib1: matched entry for 1.12.INTA (src \\_SB_.PCI0.LPC0.LNKE)
pcib1: slot 12 INTA is routed to irq 11
found->	vendor=0x10ec, dev=0x8139, revid=0x10
	bus=1, slot=12, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base d0200000, size 16, enabled
pcib1: device (null) requested decoded memory range 0xd0200000-0xd020ffff
pcib1: matched entry for 1.13.INTA (src \\_SB_.PCI0.LPC0.LNKC)
pcib1: slot 13 INTA is routed to irq 11
found->	vendor=0x168c, dev=0x0013, revid=0x01
	bus=1, slot=13, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0116, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type 1, range 32, base d0215800, size 11, enabled
pcib1: device (null) requested decoded memory range 0xd0215800-0xd0215fff
	map[14]: type 1, range 32, base d0210000, size 14, enabled
pcib1: device (null) requested decoded memory range 0xd0210000-0xd0213fff
pcib1: matched entry for 1.14.INTA (src \\_SB_.PCI0.LPC0.LNKF)
pcib1: slot 14 INTA is routed to irq 11
found->	vendor=0x104c, dev=0x8026, revid=0x00
	bus=1, slot=14, func=0
	class=0c-00-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0116, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
cbb0: <PCI-CardBus Bridge> irq 11 at device 10.0 on pci1
pcib1: device cbb0 requested decoded memory range 0xd0200000-0xd02fffff
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xd0216000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
  0x00: 0x72231217 0x04100007 0x06070000 0x00824000 
  0x10: 0xd0216000 0x020000a0 0x20020201 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd 
  0x30: 0x00000001 0x0000fffd 0x00000001 0x0400010b 
  0x40: 0x11c410cf 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x90: 0x0c0023bf 0x84420bea 0x044c0008 0x10151005 
  0xa0: 0xfe020001 0x00c04000 0x00000000 0x00000000 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00050000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
cbb1: <PCI-CardBus Bridge> irq 11 at device 10.1 on pci1
pcib1: device cbb1 requested decoded memory range 0xd0200000-0xd02fffff
cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xd0217000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
  0x00: 0x72231217 0x04100007 0x06070000 0x00824000 
  0x10: 0xd0217000 0x020000a0 0x20030301 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd 
  0x30: 0x00000001 0x0000fffd 0x00000001 0x0400010b 
  0x40: 0x11c410cf 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x90: 0x0c0023bf 0x84420bea 0x044c0008 0x10151005 
  0xa0: 0xfe020001 0x00c04000 0x00000000 0x00000000 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
pci1: <base peripheral> at device 10.2 (no driver attached)
pci1:10:2: Transition from D0 to D3
cbb2: <PCI-CardBus Bridge> at device 10.3 on pci1
pcib1: device cbb2 requested decoded memory range 0xd0200000-0xd02fffff
cbb2: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xd0218000
cardbus2: <CardBus bus> on cbb2
pccard2: <16-bit PCCard bus> on cbb2
pcib1: matched entry for 1.10.INTA (src \\_SB_.PCI0.LPC0.LNKA)
pcib1: slot 10 INTA is routed to irq 11
cbb2: [MPSAFE]
cbb2: PCI Configuration space:
  0x00: 0x72231217 0x04100087 0x06070000 0x008220a0 
  0x10: 0xd0218000 0x020000a0 0x20000000 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd 
  0x30: 0x00000001 0x0000fffd 0x00000001 0x0400010b 
  0x40: 0x11c410cf 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x90: 0x0c0023bf 0x84420bea 0x004c0008 0x10151005 
  0xa0: 0xfe020001 0x00c04000 0x00000000 0x00000000 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x3000
rl0: <RealTek 8139 10/100BaseTX> port 0x3000-0x30ff mem 0xd0215000-0xd02150ff irq 11 at device 12.0 on pci1
pcib1: device rl0 requested decoded I/O range 0x3000-0x30ff
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:0b:5d:25:b3:ea
rl0: [GIANT-LOCKED]
ath0: <Atheros 5212> mem 0xd0200000-0xd020ffff irq 11 at device 13.0 on pci1
ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xd0200000
ath0: [GIANT-LOCKED]
ath0: mac 5.6 phy 4.1 5ghz radio 4.6
ath0: unable to collect channel list from hal
device_probe_and_attach: ath0 attach returned 22
fwohci0: vendor=104c, dev=8026
fwohci0: <1394 Open Host Controller Interface> mem 0xd0210000-0xd0213fff,0xd0215800-0xd0215fff irq 11 at device 14.0 on pci1
fwohci0: latency timer 64 -> 64.
fwohci0: cache size 8 -> 8.
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xd0215800
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:00:0e:10:01:72:53:33
fwohci0: resetting OHCI...done (loop=0)
fwohci0: fwphy_rddata: 0x2 loop=0, retry=0
fwohci0: fwphy_rddata: 0x3 loop=0, retry=0
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: fwphy_rddata: 0x5 loop=0, retry=0
fwohci0: Enable 1394a Enhancements
fwohci0: fwphy_rddata: 0x5 loop=0, retry=0
fwohci0: fwphy_rddata: 0x2 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: fwphy_rddata: 0x4 loop=0, retry=0
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: BUS_OPT 0xa002 -> 0xf800a002
fwohci0: fwohci_set_intr: 1
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: 0x1 loop=0, retry=0
fwohci0: fwphy_rddata: 0x1 loop=0, retry=0
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fwohci0: fw_set_bus_manager: 0->0 (loop=0)
firewire0: bus manager 0 (me)
send phy_config root_node=-1 gap_count=5
fwohci0: maxdesc: 2
fwohci0: start AT DMA status=0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1810-0x181f at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1810
atapci0: Lazy allocation of 0x8 bytes rid 0x10 type 4 at 0x1f0
atapci0: Lazy allocation of 0x4 bytes rid 0x14 type 4 at 0x3f4
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
atapci0: Lazy allocation of 0x8 bytes rid 0x18 type 4 at 0x170
atapci0: Lazy allocation of 0x4 bytes rid 0x1c type 4 at 0x374
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
ichsmb0: <Intel 82801DC (ICH4) SMBus controller> port 0x1860-0x187f irq 11 at device 31.3 on pci0
ichsmb0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860
ichsmb0: [GIANT-LOCKED]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
pcm0: <Intel ICH4 (82801DB)> port 0x1880-0x18bf,0x1c00-0x1cff mem 0xd0100800-0xd01008ff,0xd0100c00-0xd0100dff irq 11 at device 31.5 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1c00
pcm0: Reserved 0x40 bytes for rid 0x14 type 4 at 0x1880
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC202 AC97 Codec (id = 0x414c4740)>
pcm0: Codec features headphone, 20 bit DAC, 18 bit ADC, 6 bit master volume, Realtek 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, double rate PCM, reserved 1, AMAP, reserved 4
pcm0: sndbuf_setmap 301000, 4000; 0xdf9d2000 -> 301000
pcm0: sndbuf_setmap 321000, 4000; 0xdf9d6000 -> 321000
pci0: <simple comms> at device 31.6 (no driver attached)
pci0:31:6: Transition from D0 to D3
pci0: Failed to set ACPI power state D3 on (null): AE_BAD_PARAMETER
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
psmcpnp0 irq 12 on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
cpu0 on motherboard
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xdc000-0xdffff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 999970205 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
Current DB 0
ch = 0
 Current OP   KEY INT BR   len     Addr   Depend Stat: Cnt
1eb79000 OUTL ST2 ALL ALL    12 00000000 1eb79080 8411:000f RUN,ACTIVE, ack complete(11)
0x000000e0 0x00450000 0xffbaffff 0x00000000
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acpi_cmbat0: battery initialization start
acpi_cmbat0: battery initialization done, tried 1 times
acpi_cmbat1: battery initialization start
acpi_cmbat1: battery initialization done, tried 1 times
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on Intel ICH4 chip
ata0-master: setting UDMA100 on Intel ICH4 chip
ad0: <FUJITSU MHT2060AT/0022> ATA-6 disk at ata0-master
ad0: 57231MB (117210240 sectors), 116280 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
pcm0: measured ac97 link rate at 48017 Hz, will use 48000 Hz
GEOM: new disk ad0
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:96229287
[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:96229350 l:20980890
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 49269394944 end 49269427199
GEOM: Configure ad0s2, start 49269427200 length 10742215680 end 60011642879
bus_explore done
GEOM: Configure ad0s2a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s2b, start 268435456 length 1028431872 end 1296867327
GEOM: Configure ad0s2c, start 0 length 10742215680 end 10742215679
GEOM: Configure ad0s2d, start 1296867328 length 268435456 end 1565302783
GEOM: Configure ad0s2e, start 1565302784 length 268435456 end 1833738239
GEOM: Configure ad0s2f, start 1833738240 length 8908477440 end 10742215679
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
uhub1: at uhub0 port 2 (addr 2) disconnected
uhub1: detached
uhub1: FOCUS FH-600 HUB, class 9/0, rev 1.10/4.00, addr 2
uhub1: 6 ports with 6 removable, self powered


More information about the freebsd-current mailing list