Lastest ATA checkings make my driver fail

Sean McNeil sean at
Tue Apr 13 09:44:17 PDT 2004

I have two disks that I use in a software raid (because my hardware raid
controller isn't recognized).  All was working great until the latest
checkin.  Now,

atapci0: <SiI 3112 SATA150 controller> port
mem 0xdf005000-0xdf0051ff irq 11 at device 13.0 on pci1
atapci0: Bus reserved 0x10 bytes for rid 0x20 type 4 at 0xcc00
atapci0: Bus reserved 0x200 bytes for rid 0x24 type 3 at 0xdf005000
ata2: at 0xdf005000 on atapci0
ata3: at 0xdf005000 on atapci0
fwohci0: <Texas Instruments TSB43AB23> mem
0xdf000000-0xdf003fff,0xdf006000-0xdf0067ff irq 12 at device 14.0 on
fwohci0: Bus reserved 0x800 bytes for rid 0x10 type 3 at 0xdf006000
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:0d:61:00:00:24:3c:f5
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:0d:61:24:3c:f5
fwe0: Ethernet address: 02:0d:61:24:3c:f5
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
atapci1: <nVidia nForce2 UDMA133 controller> port 0xf000-0xf00f at
device 9.0 on pci0
atapci1: Bus reserved 0x10 bytes for rid 0x20 type 4 at 0xf000
atapci1: rid 0x10 says memory, driver wants 4 failed.
atapci1: rid 0x18 says memory, driver wants 4 failed.
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib2: slot 0 INTA is routed to irq 9
pci2: <display, VGA> at device 0.0 (no driver attached)
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <Option ROM> at iomem 0xd0000-0xd47ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
Timecounter "TSC" frequency 1921035422 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled,
default to deny, logging disabled
IPsec: Initialized Security Association Processing.
ad4: 76319MB <ST380013AS> [155061/16/63] at ata2-master SATA150


More information about the freebsd-current mailing list