Cisco driver stopped working with -current
Scott Mitchell
scott+freebsd at fishballoon.org
Sun Apr 11 10:10:52 PDT 2004
On Sun, Apr 11, 2004 at 01:52:31AM +0100, Pete Carss wrote:
> Scott Mitchell wrote:
> >
> >If you try inserting the Aironet with hw.xe.debug=2 again, you should get
> >a lot of repetitions of "xe0: pccard_product_match", then nothing else
> >from the xe driver. The right driver should then come along and claim the
> >card.
> >
> >Cheers,
> >
> > Scott
>
> ....and as if by magic:
>
> xe0: pccard_match
> xe0: pccard_product_match
[...]
> xe0: pccard_product_match
> an0: <Cisco Systems 340 Series Wireless LAN Adapter> at port 0x100-0x13f
> irq 10 function 0 config 5 on pccard1
> an0: got RSSI <-> dBM map
> an0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> an0: Ethernet address: 00:40:96:44:b5:ed
> an0: [GIANT-LOCKED]
>
>
> ....sweet as! Thanks very much - I also finally learnt how to apply a
> patch properly - I always found this elusive under FreeBSD...
>
> Pete
Cool. I've committed this patch now so your next cvsup should be fine.
Cheers,
Scott
--
===========================================================================
Scott Mitchell | PGP Key ID | "Eagles may soar, but weasels
Cambridge, England | 0x54B171B9 | don't get sucked into jet engines"
scott at fishballoon.org | 0xAA775B8B | -- Anon
More information about the freebsd-current
mailing list