panic: softdep_setup_inomapdep: found inode (current of 09-20)
Andreas Klemm
andreas at freebsd.org
Mon Sep 22 14:37:03 PDT 2003
Same machines like in my other mail ...
NFS server
FreeBSD titan.klemm.apsfilter.org 5.1-CURRENT FreeBSD 5.1-CURRENT #0: Sun Sep 21 13:16:17 CEST 2003 root at titan.klemm.apsfilter.org:/usr/src/sys/i386/compile/TITAN i386
NFS client, Laptop
FreeBSD aklemm.klemm.apsfilter.org 5.1-CURRENT FreeBSD 5.1-CURRENT #0: Mon Sep 22 21:29:32 CEST 2003 root at aklemm.klemm.apsfilter.org:/usr/src/sys/i386/compile/AKLEMM i386
The kernel on the Laptop is 1 day younger than userland
just for the case that this is important.
I wanted to build the world, but didn't succeed, because running
out of mbuf clusters, since I tried to place the obj dir onto the
NFS server ...
Therefore I checked out new src's and increased mbuf cluster size...
options NMBCLUSTERS=4096 # Number of mbuf clusters
root at aklemm[ttyp0]{118} /sys/i386/compile/AKLEMM gdb -k kernel.debug /var/crash/vmcore.1
GNU gdb 5.2.1 (FreeBSD)
Copyright 2002 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "i386-undermydesk-freebsd"...
panic: softdep_setup_inomapdep: found inode
panic messages:
---
panic: lockmgr: locking against myself
panic: from debugger
Uptime: 10m26s
Dumping 191 MB
16 32 48 64 80 96 112 128 144 160 176
Dump complete
Shutting down ACPI
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot,
--> or switch off the system now.
Rebooting...
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #0: Mon Sep 22 21:29:32 CEST 2003
root at aklemm.klemm.apsfilter.org:/usr/src/sys/i386/compile/AKLEMM
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0439000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04392a0.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (696.58-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 201195520 (191 MB)
avail memory = 190812160 (181 MB)
Pentium Pro MTRR support enabled
VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc03822c2 (1000022)
VESA: S3 Incorporated. M7 BIOS
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <TOSHIB 750 > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00f0190
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfe08-0xfe0b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 5 INTD is routed to irq 11
pcib0: slot 7 INTA is routed to irq 3
pcib0: slot 9 INTA is routed to irq 11
pcib0: slot 12 INTA is routed to irq 11
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 5.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xfff0-0xffff at device 5.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 5.2 (no driver attached)
pci0: <bridge, PCI-unknown> at device 5.3 (no driver attached)
pci0: <simple comms> at device 7.0 (no driver attached)
pci0: <unknown> at device 9.0 (no driver attached)
cbb0: <ToPIC100 PCI-CardBus Bridge> at device 11.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: slot 11 INTA is routed to irq 11
cbb0: [MPSAFE]
cbb1: <ToPIC100 PCI-CardBus Bridge> at device 11.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib0: slot 11 INTB is routed to irq 11
cbb1: [MPSAFE]
pci0: <multimedia, audio> at device 12.0 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <8 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 696581970 Hz quality 800
Timecounters tick every 10.000 msec
cardbus0: Resource not specified in CIS: id=14, size=80
cardbus0: Resource not specified in CIS: id=18, size=80
xl0: <3Com 3c575B Fast Etherlink XL> port 0x1000-0x107f mem 0x88002000-0x8800207f,0x88002080-0x880020ff irq 11 at device 0.0 on cardbus0
xl0: Ethernet address: 00:50:04:94:a2:2f
miibus0: <MII bus> on xl0
tdkphy0: <TDK 78Q2120 media interface> on miibus0
tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cardbus1: Resource not specified in CIS: id=14, size=80
cardbus1: Resource not specified in CIS: id=18, size=80
xl1: <3Com 3c575B Fast Etherlink XL> port 0x1080-0x10ff mem 0x88003000-0x8800307f,0x88003080-0x880030ff irq 11 at device 0.0 on cardbus1
xl1: Ethernet address: 00:50:04:e0:11:b7
miibus1: <MII bus> on xl1
tdkphy1: <TDK 78Q2120 media interface> on miibus1
tdkphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
GEOM: create disk ad0 dp=0xc1812670
ad0: 11513MB <TOSHIBA MK1214GAP> [23392/16/63] at ata0-master UDMA33
acd0: DVDROM <TOSHIBA DVD-ROM SD-C2402> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
WARNING: / was not properly dismounted
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck
WARNING: /usr was not properly dismounted
/usr: mount pending error: blocks 44 files 69
/usr: superblock summary recomputed
WARNING: /var was not properly dismounted
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks, buffers remaining...
done
Uptime: 2m17s
Shutting down ACPI
Rebooting...
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #0: Mon Sep 22 21:29:32 CEST 2003
root at aklemm.klemm.apsfilter.org:/usr/src/sys/i386/compile/AKLEMM
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0439000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0439294.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (696.58-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 201195520 (191 MB)
avail memory = 190812160 (181 MB)
Pentium Pro MTRR support enabled
VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc03822c2 (1000022)
VESA: S3 Incorporated. M7 BIOS
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <TOSHIB 750 > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00f0190
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfe08-0xfe0b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 5 INTD is routed to irq 11
pcib0: slot 7 INTA is routed to irq 3
pcib0: slot 9 INTA is routed to irq 11
pcib0: slot 12 INTA is routed to irq 11
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 5.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xfff0-0xffff at device 5.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 5.2 (no driver attached)
pci0: <bridge, PCI-unknown> at device 5.3 (no driver attached)
pci0: <simple comms> at device 7.0 (no driver attached)
pci0: <unknown> at device 9.0 (no driver attached)
cbb0: <ToPIC100 PCI-CardBus Bridge> at device 11.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: slot 11 INTA is routed to irq 11
cbb0: [MPSAFE]
cbb1: <ToPIC100 PCI-CardBus Bridge> at device 11.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib0: slot 11 INTB is routed to irq 11
cbb1: [MPSAFE]
pci0: <multimedia, audio> at device 12.0 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <8 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 696583244 Hz quality 800
Timecounters tick every 10.000 msec
cardbus0: Resource not specified in CIS: id=14, size=80
cardbus0: Resource not specified in CIS: id=18, size=80
xl0: <3Com 3c575B Fast Etherlink XL> port 0x1000-0x107f mem 0x88002000-0x8800207f,0x88002080-0x880020ff irq 11 at device 0.0 on cardbus0
xl0: Ethernet address: 00:50:04:94:a2:2f
miibus0: <MII bus> on xl0
tdkphy0: <TDK 78Q2120 media interface> on miibus0
tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cardbus1: Resource not specified in CIS: id=14, size=80
cardbus1: Resource not specified in CIS: id=18, size=80
xl1: <3Com 3c575B Fast Etherlink XL> port 0x1080-0x10ff mem 0x88003000-0x8800307f,0x88003080-0x880030ff irq 11 at device 0.0 on cardbus1
xl1: Ethernet address: 00:50:04:e0:11:b7
miibus1: <MII bus> on xl1
tdkphy1: <TDK 78Q2120 media interface> on miibus1
tdkphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
GEOM: create disk ad0 dp=0xc1812670
ad0: 11513MB <TOSHIBA MK1214GAP> [23392/16/63] at ata0-master UDMA33
acd0: DVDROM <TOSHIBA DVD-ROM SD-C2402> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xff80-0xff9f irq 11 at device 5.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
panic: softdep_setup_inomapdep: found inode
panic: from debugger
Uptime: 18m41s
Dumping 191 MB
16 32 48 64 80 96 112 128 144 160 176
---
Reading symbols from /usr/src/sys/i386/compile/AKLEMM/modules/usr/src/sys/modules/acpi/acpi.ko.debug...done.
Loaded symbols for /usr/src/sys/i386/compile/AKLEMM/modules/usr/src/sys/modules/acpi/acpi.ko.debug
Reading symbols from /usr/src/sys/i386/compile/AKLEMM/modules/usr/src/sys/modules/msdosfs/msdosfs.ko.debug...done.
Loaded symbols for /usr/src/sys/i386/compile/AKLEMM/modules/usr/src/sys/modules/msdosfs/msdosfs.ko.debug
Reading symbols from /usr/src/sys/i386/compile/AKLEMM/modules/usr/src/sys/modules/ipfw/ipfw.ko.debug...done.
Loaded symbols for /usr/src/sys/i386/compile/AKLEMM/modules/usr/src/sys/modules/ipfw/ipfw.ko.debug
Reading symbols from /usr/src/sys/i386/compile/AKLEMM/modules/usr/src/sys/modules/nfsclient/nfsclient.ko.debug...done.
Loaded symbols for /usr/src/sys/i386/compile/AKLEMM/modules/usr/src/sys/modules/nfsclient/nfsclient.ko.debug
Reading symbols from /usr/src/sys/i386/compile/AKLEMM/modules/usr/src/sys/modules/nfsserver/nfsserver.ko.debug...done.
Loaded symbols for /usr/src/sys/i386/compile/AKLEMM/modules/usr/src/sys/modules/nfsserver/nfsserver.ko.debug
Reading symbols from /usr/src/sys/i386/compile/AKLEMM/modules/usr/src/sys/modules/usb/usb.ko.debug...done.
Loaded symbols for /usr/src/sys/i386/compile/AKLEMM/modules/usr/src/sys/modules/usb/usb.ko.debug
Reading symbols from /boot/kernel/logo_saver.ko...done.
Loaded symbols for /boot/kernel/logo_saver.ko
Reading symbols from /usr/src/sys/i386/compile/AKLEMM/modules/usr/src/sys/modules/linux/linux.ko.debug...done.
Loaded symbols for /usr/src/sys/i386/compile/AKLEMM/modules/usr/src/sys/modules/linux/linux.ko.debug
#0 doadump () at ../../../kern/kern_shutdown.c:240
240 dumping++;
(kgdb)
(kgdb) where
#0 doadump () at ../../../kern/kern_shutdown.c:240
#1 0xc01babc7 in boot (howto=260) at ../../../kern/kern_shutdown.c:372
#2 0xc01bafa8 in panic () at ../../../kern/kern_shutdown.c:550
#3 0xc01231e2 in db_panic () at ../../../ddb/db_command.c:450
#4 0xc0123142 in db_command (last_cmdp=0xc03438c0, cmd_table=0x0,
aux_cmd_tablep=0xc031c550, aux_cmd_tablep_end=0xc031c554)
at ../../../ddb/db_command.c:346
#5 0xc0123285 in db_command_loop () at ../../../ddb/db_command.c:472
#6 0xc01262a5 in db_trap (type=3, code=0) at ../../../ddb/db_trap.c:73
#7 0xc02c82cc in kdb_trap (type=3, code=0, regs=0xd323d6fc)
at ../../../i386/i386/db_interface.c:171
#8 0xc02d9c7a in trap (frame=
{tf_fs = 24, tf_es = -752680944, tf_ds = -1071644656, tf_edi = 1, tf_esi = -1070522127, tf_ebp = -752625848, tf_isp = -752625880, tf_ebx = 0, tf_edx = 0, tf_ecx = 32, tf_eax = 18, tf_trapno = 3, tf_err = 0, tf_eip = -1070824060, tf_cs = 8, tf_eflags = 646, tf_esp = -1070500194, tf_ss = -1070555829})
at ../../../i386/i386/trap.c:578
#9 0xc02c9cb8 in calltrap () at {standard input}:102
#10 0xc01baee5 in panic (fmt=0xc03120f1 "softdep_setup_inomapdep: found inode")
at ../../../kern/kern_shutdown.c:534
#11 0xc026ab06 in softdep_setup_inomapdep (bp=0xc553eb00, ip=0x0, newinum=0)
at ../../../ufs/ffs/ffs_softdep.c:1278
#12 0xc025c2f2 in ffs_nodealloccg (ip=0xc1c677a8, cg=0, ipref=14406,
mode=33188) at ../../../ufs/ffs/ffs_alloc.c:1611
#13 0xc025b097 in ffs_hashalloc (ip=0xc1c677a8, cg=0, pref=0, size=33188,
allocator=0xc025c000 <ffs_nodealloccg>)
at ../../../ufs/ffs/ffs_alloc.c:1155
#14 0xc025a7ae in ffs_valloc (pvp=0xc1cac124, mode=33188, cred=0xc1920580,
vpp=0xd323d8b8) at ../../../ufs/ffs/ffs_alloc.c:857
#15 0xc0285429 in ufs_makeinode (mode=33188, dvp=0xc1cac124, vpp=0xd323dbe0,
cnp=0xd323dbf4) at ../../../ufs/ufs/ufs_vnops.c:2357
#16 0xc0281949 in ufs_create (ap=0xd323da40)
at ../../../ufs/ufs/ufs_vnops.c:199
#17 0xc0285bf8 in ufs_vnoperate (ap=0x0) at ../../../ufs/ufs/ufs_vnops.c:2792
#18 0xc0225abe in vn_open_cred (ndp=0xd323dbcc, flagp=0xd323dccc, cmode=420,
cred=0xc1920580, fdidx=0) at vnode_if.h:118
#19 0xc0225910 in vn_open (ndp=0x0, flagp=0x0, cmode=0, fdidx=0)
at ../../../kern/vfs_vnops.c:93
#20 0xc021ead3 in kern_open (td=0xc180ce40, path=0x0, pathseg=UIO_USERSPACE,
flags=522, mode=438) at ../../../kern/vfs_syscalls.c:688
#21 0xc021e960 in open (td=0x0, uap=0x0) at ../../../kern/vfs_syscalls.c:654
#22 0xc02da630 in syscall (frame=
{tf_fs = 134938671, tf_es = 135004207, tf_ds = -1078001617, tf_edi = 8, tf_esi = 674821400, tf_ebp = -1077939896, tf_isp = -752624268, tf_ebx = 674746852, tf_edx = 521, tf_ecx = 134995387, tf_eax = 5, tf_trapno = 12, tf_err = 2, tf_eip = 674241311, tf_cs = 31, tf_eflags = 518, tf_esp = -1077939940, tf_ss = 47})
at ../../../i386/i386/trap.c:1006
#23 0xc02c9d0d in Xint0x80_syscall () at {standard input}:144
---Can't read userspace from dump, or kernel process---
Andreas ///
--
Andreas Klemm - Powered by FreeBSD 5.1-CURRENT
Need a magic printfilter today ? -> http://www.apsfilter.org/
-------------- next part --------------
machine i386
cpu I686_CPU
ident AKLEMM
options INCLUDE_CONFIG_FILE # Include this file in kernel
makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
options SCHED_4BSD #4BSD scheduler
#options SCHED_ULE
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options SOFTUPDATES #Enable FFS soft updates support
options UFS_ACL #Support for access control lists
options UFS_DIRHASH #Improve performance on big directories
options MD_ROOT #MD is a potential root device
options PROCFS #Process filesystem (requires PSEUDOFS)
options PSEUDOFS #Pseudo-filesystem framework
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 #Compatible with FreeBSD4
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options NMBCLUSTERS=4096 # Number of mbuf clusters
options ZERO_COPY_SOCKETS
options RANDOM_IP_ID
#options DUMMYNET
options SHOW_BUSYBUFS # List buffers that prevent root unmount
# Debugging for use in -current
options DDB #Enable the kernel debugger
device isa
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
options ATA_STATIC_ID #Static device numbering
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
options MAXCONS=8
options SC_HISTORY_SIZE=512 # number of history buffer lines
options VESA # support VGA VESA video modes
device agp # support several AGP chipsets
# Floating point support - do not disable.
device npx
# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer
# PCCARD (PCMCIA) support
# Pcmcia and cardbus bridge support
device cbb # cardbus (yenta) bridge
#device pcic # ExCA ISA and PCI bridges
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# Pseudo devices - the number indicates how many units to allocate.
device random # Entropy device
device loop # Network loopback
device ether # Ethernet support
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf # Berkeley packet filter
device snp #Snoop device - to look at pty/vty/etc..
More information about the freebsd-current
mailing list