X10 Wireless Technology Inc USB Receiver

[Bernd Walter]

On Sun, Sep 21, 2003 at 10:35:33AM -0700, Lars Eggert wrote:
> Hi,
> 
> I'm trying to get the USB RF remote control that comes with some ATI 
> Wonder cards to do something meaningful under -current.
> 
> It shows up as an "X10 Wireless Technology Inc USB Receiver" with three 
> devices: /dev/ugen0, and the corresponding input (/dev/ugen0.1) and 
> output endpoints (/dev/ugen/0.2). Also see the attached usbctl output.
> 
> Simply reading from the input endpoint /dev/ugen0.1 doesn't work.
> 
> This page (http://remotew.free.fr/linux_en.htm) points at the Gatos
> project, which has a Linux driver (ati_remote) that seems to make the
> remote show up as a USB keyboard:
> http://sourceforge.net/project/showfiles.php?group_id=12629
> 
> That driver sends a couple of magic bytes to the device during 
> initialization. I'm trying to do the same from userland:
> 
> static char init1[]= { 0x80, 0x01, 0x00, 0x20, 0x14 };
> static char init2[]= { 0x80, 0x01, 0x00, 0x20, 0x14, 0x20, 0x20, 0x20 };
> 
> int main(int argc, char *argv[]) {
>   int out = open("/dev/ugen0.2", O_WRONLY);
>   if (out == -1) {
>     perror("ugen0.2");
>     goto done;
>   }
> 
>   if (write(out, init1, sizeof init1) == -1) {
>     perror("write init1");
>     goto done;
>   }
> 
>   if (write(out, init2, sizeof init2) == -1) {
>     perror("write init1");
>     goto done;
>   }
> 
>  done:
>   close(out);
> }
> 
> Really simply. Here's what happens when I run it:
> 
> 	write init1: Input/output error

Are you shure that the above is correct data for the device?
The IO error could also be returned from the device.
What does USB_DEBUG with hw.usb.debug=2 and hw.usb.ugen.debug=2 say?
Bevor I download the complete source you mentioned, can you give us the
lines that lead to the above command?

> it feels like I'm missing something extremely obvious, but I'm new to 
> the USB internals. The two endpoints are "interrupt" endpoints. I'm not 
> sure what that signifies, but I heard writing to them on -stable is 
> broken, but on -current it should work.

I don't know, but it could also depend on the controller you use.
E.g. ehci currently doesn't support interrupt endpoints at all.

-- 
B.Walter                   BWCT                http://www.bwct.de
ticso at bwct.de                                  info at bwct.de