ATAng still problematic
Andrew Lankford
arlankfo at 141.com
Thu Sep 18 09:01:56 PDT 2003
Soren,
I've noticed the same thing with the last two builds.
After detaching and then re-attaching the second channel,
both my slave dvdrom and my truant master cdrw show up and appear
to work ok. I just tried your patch (didn't apply cleanly
so I edited the file myself). No apparent change.
Attached is my dmesg -a output for this bootup (includes
results of "atacontrol detach 1 ; atacontrol attach 1")
Andrew Lankford
-------------- next part --------------
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #7: Thu Sep 18 11:34:01 EDT 2003
root at bogushost2:/usr/obj/usr/src/sys/ARL5KERNEL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04de000.
Preloaded elf module "/boot/kernel/vesa.ko" at 0xc04de21c.
Preloaded elf module "/boot/kernel/if_sis.ko" at 0xc04de2c8.
Preloaded elf module "/boot/kernel/miibus.ko" at 0xc04de374.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc04de420.
Preloaded elf module "/boot/kernel/snd_es137x.ko" at 0xc04de4cc.
Preloaded elf module "/boot/kernel/usb.ko" at 0xc04de57c.
Preloaded elf module "/boot/kernel/ums.ko" at 0xc04de624.
Preloaded elf module "/boot/kernel/agp.ko" at 0xc04de6cc.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04de774.
Calibrating clock(s) ... i8254 clock: 1193296 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 737021995 Hz
CPU: Intel Pentium III (737.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 535736320 (510 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000505000 - 0x000000001f5c9fff, 520900608 bytes (127173 pages)
avail memory = 515051520 (491 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f1430
bios32: Entry = 0xf0bf0 (c00f0bf0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xdf0
pnpbios: Found PnP BIOS data at 0xc00fc070
pnpbios: Entry = f0000:c0a0 Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
VESA: information block
56 45 53 41 00 03 00 01 00 01 01 00 00 00 22 00
00 01 10 00 53 25 2e 01 00 01 40 01 00 01 63 01
00 01 1c 01 09 01 0a 01 0b 01 0c 01 1d 01 0e 01
00 01 27 01 28 01 01 01 10 01 11 01 12 01 02 01
VESA: 20 mode(s) found
VESA: v3.0, 1024k memory, flags:0x1, mode table:0xc0403c62 (1000022)
VESA: Intel(R) 810, Intel(R) 815 Chipset Video BIOS
VESA: Intel Corporation Intel(R) 810, Intel(R) 815 Chipset Hardware Version 0.0
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS CUSL2 > on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=11308086)
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00f1360
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
slot 7 254 0 A 0x60 3 4 5 7 9 10 11 12
slot 7 254 0 B 0x61 3 4 5 7 9 10 11 12
embedded 0 2 A 0x60 3 4 5 7 9 10 11 12
embedded 0 31 A 0x60 3 4 5 7 9 10 11 12
embedded 0 31 B 0x61 3 4 5 7 9 10 11 12
embedded 0 31 C 0x6b 3 4 5 7 9 10 11 12
embedded 0 31 D 0x63 3 4 5 7 9 10 11 12
slot 1 1 9 A 0x69 3 4 5 7 9 10 11 12
slot 1 1 9 B 0x6a 3 4 5 7 9 10 11 12
slot 1 1 9 C 0x6b 3 4 5 7 9 10 11 12
slot 1 1 9 D 0x68 3 4 5 7 9 10 11 12
slot 2 1 10 A 0x6a 3 4 5 7 9 10 11 12
slot 2 1 10 B 0x6b 3 4 5 7 9 10 11 12
slot 2 1 10 C 0x68 3 4 5 7 9 10 11 12
slot 2 1 10 D 0x69 3 4 5 7 9 10 11 12
slot 3 1 11 A 0x6b 3 4 5 7 9 10 11 12
slot 3 1 11 B 0x68 3 4 5 7 9 10 11 12
slot 3 1 11 C 0x69 3 4 5 7 9 10 11 12
slot 3 1 11 D 0x6a 3 4 5 7 9 10 11 12
slot 4 1 12 A 0x68 3 4 5 7 9 10 11 12
slot 4 1 12 B 0x69 3 4 5 7 9 10 11 12
slot 4 1 12 C 0x6a 3 4 5 7 9 10 11 12
slot 4 1 12 D 0x6b 3 4 5 7 9 10 11 12
slot 5 1 13 A 0x69 3 4 5 7 9 10 11 12
slot 5 1 13 B 0x6a 3 4 5 7 9 10 11 12
slot 5 1 13 C 0x6b 3 4 5 7 9 10 11 12
slot 5 1 13 D 0x68 3 4 5 7 9 10 11 12
slot 6 1 14 A 0x62 3 4 5 7 9 10 11 12
slot 6 1 14 B 0x63 3 4 5 7 9 10 11 12
slot 6 1 14 C 0x60 3 4 5 7 9 10 11 12
slot 6 1 14 D 0x61 3 4 5 7 9 10 11 12
embedded 1 8 A 0x68 3 4 5 7 9 10 11 12
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks BAD min = 3, max = 792, width = 789
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks BAD min = 3, max = 773, width = 770
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 5, width = 2
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.0
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.0
\\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.1
\\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.2
\\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.3
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.0
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.0
\\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.1
\\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.2
\\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x1130, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base f8000000, size 26, enabled
map[14]: type 1, range 32, base f7000000, size 19, enabled
pcib0: matched entry for 0.2.INTA (source \\_SB_.LNKA)
pcib0: slot 2 INTA is routed to irq 11
found-> vendor=0x8086, dev=0x1132, revid=0x02
bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
found-> vendor=0x8086, dev=0x244e, revid=0x01
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2440, revid=0x01
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000b800, size 4, enabled
found-> vendor=0x8086, dev=0x244b, revid=0x01
bus=0, slot=31, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000b400, size 5, enabled
pcib0: matched entry for 0.31.INTD (source \\_SB_.LNKD)
pcib0: slot 31 INTD is routed to irq 9
found-> vendor=0x8086, dev=0x2442, revid=0x01
bus=0, slot=31, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=9
map[20]: type 4, range 32, base 0000e800, size 4, enabled
pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB)
pcib0: slot 31 INTB is routed to irq 10
found-> vendor=0x8086, dev=0x2443, revid=0x01
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type 4, range 32, base 0000b000, size 5, enabled
pcib0: matched entry for 0.31.INTC (source \\_SB_.LNKH)
pcib0: slot 31 INTC is routed to irq 9
found-> vendor=0x8086, dev=0x2444, revid=0x01
bus=0, slot=31, func=4
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=9
agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem 0xf7000000-0xf707ffff,0xf8000000-0xfbffffff irq 11 at device 2.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xc000-0xdfff
pcib1: memory decode 0xf6000000-0xf6ffffff
pcib1: prefetched decode 0xf7f00000-0xf7ffffff
---- initial configuration ------------------------
\\_SB_.LNKF irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.0
\\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.1
\\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.2
\\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.3
\\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.0
\\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.1
\\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.2
\\_SB_.LNKF irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.3
\\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.0
\\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.1
\\_SB_.LNKF irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.2
\\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.3
\\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.0
\\_SB_.LNKF irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.1
\\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.2
\\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.3
\\_SB_.LNKF irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.0
\\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.1
\\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.2
\\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.3
\\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.0
\\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.2
\\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.3
\\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.8.0
---- before setting priority for links ------------
\\_SB_.LNKF:
interrupts: 3 4 5 6 7 9 10 11 12 14 15
penalty: 2210 2210 1210 2210 2210 2610 1410 1510 2210 11210 11210
references: 5
priority: 0
\\_SB_.LNKG:
interrupts: 3 4 5 6 7 9 10 11 12 14 15
penalty: 2210 2210 1210 2210 2210 2610 1410 1510 2210 11210 11210
references: 5
priority: 0
\\_SB_.LNKC:
interrupts: 3 4 5 6 7 9 10 11 12 14 15
penalty: 2210 2210 1210 2210 2210 2610 1410 1510 2210 11210 11210
references: 1
priority: 0
---- before fixup boot-disabled links -------------
\\_SB_.LNKF:
interrupts: 3 4 5 6 7 9 10 11 12 14 15
penalty: 2210 2210 1210 2210 2210 2610 1410 1510 2210 11210 11210
references: 5
priority: 18277
\\_SB_.LNKG:
interrupts: 3 4 5 6 7 9 10 11 12 14 15
penalty: 2210 2210 1210 2210 2210 2610 1410 1510 2210 11210 11210
references: 5
priority: 18277
\\_SB_.LNKC:
interrupts: 3 4 5 6 7 9 10 11 12 14 15
penalty: 2210 2210 1210 2210 2210 2610 1410 1510 2210 11210 11210
references: 1
priority: 3655
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKF irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.0
\\_SB_.LNKG irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.1
\\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.2
\\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.3
\\_SB_.LNKG irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.0
\\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.1
\\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.2
\\_SB_.LNKF irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.3
\\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.0
\\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.1
\\_SB_.LNKF irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.2
\\_SB_.LNKG irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.3
\\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.0
\\_SB_.LNKF irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.1
\\_SB_.LNKG irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.2
\\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.3
\\_SB_.LNKF irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.0
\\_SB_.LNKG irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.1
\\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.2
\\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.3
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.0
\\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.2
\\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.3
\\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.8.0
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 4, range 32, base 0000d800, size 8, port disabled
map[14]: type 1, range 32, base f6800000, size 12, memory disabled
found-> vendor=0x100b, dev=0x0020, revid=0x00
bus=1, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0004, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x0b (2750 ns), maxlat=0x34 (13000 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000d400, size 7, enabled
map[14]: type 1, range 32, base f6000000, size 7, enabled
pcib1: matched entry for 1.12.INTA (source \\_SB_.LNKE)
pcib1: slot 12 INTA is routed to irq 9
found-> vendor=0x10b7, dev=0x9200, revid=0x74
bus=1, slot=12, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000d000, size 6, port disabled
found-> vendor=0x1274, dev=0x5880, revid=0x02
bus=1, slot=14, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0004, statreg=0x0410, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns)
intpin=a, irq=255
powerspec 1 supports D0 D2 D3 current D3
sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xd800-0xd8ff mem 0xf6800000-0xf6800fff at device 9.0 on pci1
pcib1: device sis0 requested decoded I/O range 0xd800-0xd8ff
pcib1: matched entry for 1.9.INTA (source \\_SB_.LNKF)
pcib1: slot 9 INTA is routed to irq 5
sis0: Silicon Revision: DP83815D
sis0: Ethernet address: 00:02:e3:1c:cf:9e
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x080017, model 0x0002, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: bpf attached
pci1: <network, ethernet> at device 12.0 (no driver attached)
pcm0: <Creative CT5880-C> port 0xd000-0xd03f at device 14.0 on pci1
pcib1: device pcm0 requested decoded I/O range 0xd000-0xd03f
pcm0: <SigmaTel STAC9721/23 AC97 Codec (id = 0x83847609)>
pcm0: Codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement
pcm0: Primary codec extended features AMAP
pcib1: matched entry for 1.14.INTA (source \\_SB_.LNKC)
pcib1: slot 14 INTA is routed to irq 11
pcm0: sndbuf_setmap 696000, 1000; 0xc4042000 -> 696000
pcm0: sndbuf_setmap 6b4000, 1000; 0xc4040000 -> 6b4000
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0xb800-0xb80f at device 31.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-slave: stat=0x00 err=0x8e lsb=0x00 msb=0x00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xb400-0xb41f irq 9 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
ichsmb0: <Intel 82801BA (ICH2) SMBus controller> port 0xe800-0xe80f irq 10 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb000-0xb01f irq 9 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2
uhub2: 4 ports with 4 removable, self powered
unknown: not probed (disabled)
speaker0 port 0x61 on acpi0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sc: sc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
vga: vga0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <Option ROMs> at iomem 0xd0000-0xd07ff,0xcc000-0xcffff,0xc0000-0xcbfff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Timecounter "TSC" frequency 737021995 Hz quality 800
Timecounters tick every 10.000 msec
IPv6 packet filtering initialized, default to accept, logging limited to 1 packets/entry
lo0: bpf attached
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled
ata1: spurious interrupt - status=0x00 error=0x01
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ad0: setting UDMA100 on Intel ICH2 chip
GEOM: create disk ad0 dp=0xc40bec70
ad0: <IBM-DTLA-307030/TX4OA5AA> ATA-5 disk at ata0-master
ad0: 29314MB (60036480 sectors), 59560 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: pio=0x08 wdma=0xffffffff udma=0xffffffff cable=80pin
acd0: setting PIO4 on Intel ICH2 chip
acd0: <HITACHI DVD-ROM GD-7500/0005> DVDROM drive at ata1 as slave
acd0: read 2412KB/s (6890KB/s), 512KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM 120mm audio disc
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):565/8/63 s:63 l:15020712
[1] f:00 typ:12 s(CHS):565/9/1 e(CHS):605/5/63 s:15020775 l:2104515
[2] f:00 typ:7 s(CHS):605/6/1 e(CHS):106/15/63 s:17125290 l:12916134
[3] f:80 typ:165 s(CHS):107/2/1 e(CHS):167/15/63 s:30041550 l:29994930
GEOM: Configure ad0s1, start 32256 length 7690604544 end 7690636799
GEOM: Configure ad0s2, start 7690636800 length 1077511680 end 8768148479
GEOM: Configure ad0s3, start 8768148480 length 6613060608 end 15381209087
GEOM: Configure ad0s4, start 15381273600 length 15357404160 end 30738677759
GEOM: Configure ad0s4a, start 0 length 209715200 end 209715199
GEOM: Configure ad0s4b, start 209715200 length 1073741824 end 1283457023
GEOM: Configure ad0s4c, start 0 length 15357404160 end 15357404159
GEOM: Configure ad0s4f, start 1283457024 length 209715200 end 1493172223
GEOM: Configure ad0s4g, start 1493172224 length 13864231936 end 15357404159
Mounting root from ufs:/dev/ad0s4a
start_init: trying /sbin/init
Loading configuration files.
Entropy harvesting:
interrupts
ethernet
point_to_point
.
kernel dumps on /dev/ad0s4b
swapon: adding /dev/ad0s4b as swap device
Starting file system checks:
/dev/ad0s4a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s4a: clean, 49784 free (344 frags, 6180 blocks, 0.3% fragmentation)
/dev/ad0s4f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s4f: clean, 171422 free (134 frags, 21411 blocks, 0.1% fragmentation)
/dev/ad0s4g: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s4g: clean, 4031416 free (32624 frags, 499849 blocks, 0.5% fragmentation)
Setting hostname: bogushost2.
net.inet.tcp.blackhole:
0
->
2
net.inet.udp.blackhole:
0
->
1
net.inet.tcp.log_in_vain:
0
->
1
net.inet.tcp.inflight_enable:
0
->
1
kern.module_path:
/boot/kernel;/boot/kernel;/boot/modules
->
/boot/kernel
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd400-0xd47f mem 0xf6000000-0xf600007f irq 9 at device 12.0 on pci1
pcib1: device xl0 requested decoded memory range 0xf6000000-0xf600007f
xl0: using memory mapped I/O
xl0: Ethernet address: 00:01:02:73:ee:49
xl0: media options word: a
xl0: found MII/AUTO
xl0: bpf attached
miibus1: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus1
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet 127.0.0.1 netmask 0xff000000
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=b<RXCSUM,TXCSUM,VLAN_MTU>
inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
inet6 fe80::201:2ff:fe73:ee49%xl0 prefixlen 64 tentative scopeid 0x3
ether 00:01:02:73:ee:49
media: Ethernet autoselect (none)
status: no carrier
Starting ppp as "arlankfo"
tun0: bpf attached
ppp: Pausing until /bin/rm finishes
route:
writing to routing socket
:
No such process
Firewall rules loaded, starting divert daemons:
.
Firewall logging enabled
net.inet.ip.fw.enable:
1
->
1
Additional routing options:
IP gateway=YES
.
hw.bus.devctl_disable:
0
->
1
Mounting NFS file systems:
.
Starting syslogd.
Sep 18 11:49:38 bogushost2 syslogd: kernel boot file is /boot/kernel/kernel
Checking for core dump...
checking for kernel dump on device /dev/ad0s4b
mediasize = 1073741824
sectorsize = 512
magic mismatch on last dump header on /dev/ad0s4b
savecore: no dumps found
Clearing /tmp.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout
Starting local daemons:
.
Starting lpd.
Updating motd.
Starting ntpd.
Starting usbd.
Configuring syscons:
keybell
\^[[=39772;5B
cursor
font8x16
font8x14
font8x8
blanktime
screensaver
splash: image decoder found: green_saver
allscreens
.
Starting sshd.
Initial i386 initialization:
.
Additional ABI support:
linux
Linux ELF exec handler installed
ipfw: 300 Deny UDP 127.0.0.1:123 140.162.8.3:123 out via tun0
Sep 18 11:49:42 bogushost2 ntpd[434]: sendto(140.162.8.3): Permission denied
.
Starting cron.
Local package initialization:
xdm
.
Additional TCP options:
.
net.inet.ip.fw.verbose:
1
->
0
Starting background file system checks in 60 seconds.
Thu Sep 18 11:49:43 EDT 2003
Sep 18 11:49:46 bogushost2 ntpd[434]: sendto(198.82.162.213): Permission denied
Sep 18 11:49:53 bogushost2 ntpd[434]: sendto(129.6.15.28): Permission denied
Sep 18 11:49:56 bogushost2 login: ROOT LOGIN (root) ON ttyv0
acd0: WARNING - removed from configuration
ata1-master: WARNING - FLUSHCACHE recovered from missing interrupt
ata1-master: FAILURE - FLUSHCACHE status=41<READY,ERROR> error=4<ABORTED>
ata1: reset tp1 mask=03 ostat0=41 ostat1=50
stray irq 15
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: [MPSAFE]
ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
acd0: setting PIO4 on Intel ICH2 chip
acd0: <PLEXTOR CD-R PX-W8432T/1.09> CDRW drive at ata1 as master
acd0: read 5512KB/s (5512KB/s) write 1377KB/s (1377KB/s), 4096KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes: CDR, CDRW, test write
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM unknown
acd1: setting PIO4 on Intel ICH2 chip
acd1: <HITACHI DVD-ROM GD-7500/0005> DVDROM drive at ata1 as slave
acd1: read 2412KB/s (6890KB/s), 512KB buffer, PIO4
acd1: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd1: Writes:
acd1: Audio: play, 256 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: CD-ROM 120mm audio disc
More information about the freebsd-current
mailing list