Xircom pccard couldn't load/attach (with uname -a info)

[Scott Mitchell]

On Sat, Nov 29, 2003 at 02:20:24PM +0100, Ronald Klop wrote:
> On Sat, 29 Nov 2003 14:17:01 +0100, Ronald Klop 
> <ronald-freebsd4 at klop.yi.org> wrote:
> 
> >Hello,
> >
> >This card doesn't attach well. Other Xircom cards do.
> >
> >Nov 29 13:47:24 laptop kernel: xe0: <Xircom CreditCard Ethernet 10/100 
> >+ Modem 56> at port 0x2e8-0x2ef irq 11 function 0 config 39 on pccard0
> >Nov 29 13:47:24 laptop kernel: device_probe_and_attach: xe0 attach 
> >returned 12
> >
> >Mail me if more info is needed.
> 
> uname -a
> FreeBSD laptop 5.2-BETA FreeBSD 5.2-BETA #0: Sun Nov 23 22:09:51 CET 
> 2003     root at henk.thuis.klop.ws:/usr/obj/usr/src/sys/LAPTOP  i386

Hi Ronald,

Could you try setting sysctl hw.xe.debug=1 and post the output?  Also, are
you using OLDCARD or NEWCARD?  A full dmesg might be useful too...
I suspect there's a problem with the driver not knowing all the card IDs
that Xircom ever used, as well as probing some cards differently when run
under NEWCARD vs. OLDCARD. 

Cheers,

	Scott

-- 
===========================================================================
Scott Mitchell           | PGP Key ID | "Eagles may soar, but weasels
Cambridge, England       | 0x54B171B9 |  don't get sucked into jet engines"
scott at fishballoon.org | 0xAA775B8B |      -- Anon