[ATAng?] ad1 disappeared again
NAKAJI Hiroyuki
nakaji at jp.freebsd.org
Tue Nov 25 20:00:56 PST 2003
Hi,
I'm preparing new machine with 5-current. First, I installed a snapshot on
Feb 21 2003. It works well. From the beginning of this week, I started
updating it to the latest, and found the problem.
The box is built with following parts.
o ASUS P4G8X
o P4 2.53GHz
o 2GB memory
o Seagate ST340810A x2 (Primary master and slave)
o HighPoint HPT370 UDMA100 controller
o 2 80GB HDDs in Accusys ACS7500 connected to HPT370
o Intel Pro 10/100B/100+ Ethernet
The problem is that the latest GENERIC kernel cannot detect ad1
(the second ST340810A).
Two dmesg outputs (without "-v") are attached below, the former is
20030221 and the latter is today's one.
Thanks.
--
NAKAJI Hiroyuki
=== 20030221 ===
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-20030221-SNAP #0: Fri Feb 21 08:19:58 GMT 2003
root at boggy.acest.tutrp.tut.ac.jp:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel.ok/kernel" at 0xc06b9000.
Preloaded elf module "/boot/kernel.ok/acpi.ko" at 0xc06b90ac.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 2533439528 Hz
CPU: Intel(R) Pentium(R) 4 CPU 2.53GHz (2533.44-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 2147467264 (2047 MB)
avail memory = 2083090432 (1986 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS P4G8X > on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE31
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00f2320
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel Generic host to PCI bridge> mem 0xf0000000-0xf3ffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> mem 0xe8000000-0xebffffff at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xb800-0xb81f irq 11 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xb400-0xb41f irq 9 at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xb000-0xb01f irq 5 at device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
atapci0: <HighPoint HPT370 UDMA100 controller> port 0x9400-0x94ff,0x9800-0x9803,0xa000-0xa007,0xa400-0xa403,0xa800-0xa807 irq 9 at device 1.0 on pci2
ata2: at 0xa800 on atapci0
ata3: at 0xa000 on atapci0
pci2: <network, ethernet> at device 5.0 (no driver attached)
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x9000-0x903f mem 0xdd000000-0xdd0fffff,0xdd800000-0xdd800fff irq 5 at device 7.0 on pci2
fxp0: Ethernet address 00:20:e0:60:28:64
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH4 UDMA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 5 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
pci0: <multimedia, audio> at device 31.5 (no driver attached)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: failed to get data.
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
orm0: <Option ROMs> at iomem 0xd0000-0xd0fff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
ad0: 38166MB <ST340810A> [77545/16/63] at ata0-master UDMA100
ad1: 38166MB <ST340810A> [77545/16/63] at ata0-slave UDMA100
ad4: 76319MB <Accusys ACS7500 C3VL> [155061/16/63] at ata2-master UDMA100
acd0: DVD-ROM <DVDROM> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
=== today ===
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-BETA #3: Wed Nov 26 12:09:53 JST 2003
root at dhcp05.acest.tutrp.tut.ac.jp:/usr/obj/usr/src/sys/NAKAJI
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a64000.
ACPI APIC Table: <ASUS P4G8X >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.53GHz (2533.43-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 2147467264 (2047 MB)
avail memory = 2080702464 (1984 MB)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
acpi0: <ASUS P4G8X > on motherboard
acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 22
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00f2320
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel Generic host to PCI bridge> mem 0xf0000000-0xf3ffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> mem 0xe8000000-0xebffffff at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xb800-0xb81f irq 16 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xb400-0xb41f irq 19 at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xb000-0xb01f irq 18 at device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
atapci0: <HighPoint HPT370 UDMA100 controller> port 0x9400-0x94ff,0x9800-0x9803,0xa000-0xa007,0xa400-0xa403,0xa800-0xa807 irq 22 at device 1.0 on pci2
atapci0: [MPSAFE]
ata2: at 0xa800 on atapci0
ata2: [MPSAFE]
ata3: at 0xa000 on atapci0
ata3: [MPSAFE]
bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xde000000-0xde001fff irq 18 at device 5.0 on pci2
bfe0: Ethernet address: 00:e0:18:e6:85:3c
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x9000-0x903f mem 0xdd000000-0xdd0fffff,0xdd800000-0xdd800fff irq 18 at device 7.0 on pci2
fxp0: Ethernet address 00:20:e0:60:28:64
miibus1: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus1
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH4 UDMA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 18 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci1
ata1: [MPSAFE]
pci0: <multimedia, audio> at device 31.5 (no driver attached)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: failed to get data.
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
orm0: <Option ROMs> at iomem 0xd0000-0xd0fff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2533432728 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc8308d60
ad0: 38166MB <ST340810A> [77545/16/63] at ata0-master UDMA100
acd0: DVDROM <DVDROM> at ata1-master PIO4
GEOM: create disk ad4 dp=0xc8308b60
ad4: 76319MB <Accusys ACS7500 C3VL> [155061/16/63] at ata2-master UDMA100
Mounting root from ufs:/dev/ad0s1a
module_register: module pci/fxp already exists!
Module pci/fxp failed to register: 17
module_register: module fxp/miibus already exists!
Module fxp/miibus failed to register: 17
can't re-use a leaf (fxp_rnr)!
can't re-use a leaf (fxp_noflow)!
module_register: module pci/bfe already exists!
Module pci/bfe failed to register: 17
module_register: module bfe/miibus already exists!
Module bfe/miibus failed to register: 17
More information about the freebsd-current
mailing list