serial console trouble
Robin P. Blanchard
robin.blanchard at gactr.uga.edu
Mon Nov 24 17:37:15 PST 2003
I'm putting together a ipf/ipnat gateway for a friend using his abit BX
(rev2) motherboard. I'd very much to get serial console working before
tendering it over; but am having zero luck. The world/kernel deployed to this
box is from my NFS host box (which runs the same kernel/world, and whose
serial console works fine). The only thing that seems odd to me is that dmesg
doesn't report the appropriate flags (0x10) despite them being in
device.hints. Nevertheless, I should still be able to use the serial port as
a login terminal give my ttys; but even that doesn't work. Anyone see
anything awry here ? Anything I should try ? I've tried disabling acpi in the
bios to no avail; switching on/off PNP in the bios to no avail; switching
from auto to hard-set port settings in the bios to no avail. Lengthy verbose
boot follows as well as kernel config.
# uname -a
FreeBSD test.robinpb.home 5.2-BETA FreeBSD 5.2-BETA #0: Mon Nov 24 14:41:28
EST 2003 root at bsdfs5.gactr.uga.edu:/usr/obj/usr/src/sys/vpn.ule i386
# fgrep COMCONSOLE /etc/make.conf
BOOT_COMCONSOLE_SPEED=19200
# fgrep ttyd0 /etc/ttys
ttyd0 "/usr/libexec/getty std.19200" unknown on secure
# fgrep sio.0 /boot/device.hints
hint.sio.0.at="isa"
hint.sio.0.port="0x3F8"
hint.sio.0.flags="0x10"
hint.sio.0.irq="4"
# cat /var/run/dmesg.boot
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-BETA #0: Mon Nov 24 14:41:28 EST 2003
root at bsdfs5.gactr.uga.edu:/usr/obj/usr/src/sys/vpn.ule
Preloaded elf kernel "/boot/kernel/kernel" at 0xc07a8000.
Preloaded elf module "/boot/modules/linux.ko" at 0xc07a81f4.
Preloaded elf module "/boot/modules/if_de.ko" at 0xc07a82a0.
Preloaded elf module "/boot/modules/accf_data.ko" at 0xc07a834c.
Preloaded elf module "/boot/modules/accf_http.ko" at 0xc07a83fc.
Calibrating clock(s) ... i8254 clock: 1193269 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 412365212 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (412.37-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x653 Stepping = 3
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,P
AT,PSE36,MMX,FXSR
>
real memory = 134152192 (127 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000829000 - 0x0000000007d89fff, 123080704 bytes (30049 pages)
avail memory = 124874752 (119 MB)
bios32: Found BIOS32 Service Directory header at 0xc00faf00
bios32: Entry = 0xfb380 (c00fb380) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb3b0
pnpbios: Found PnP BIOS data at 0xc00fbfd0
pnpbios: Entry = f0000:bff8 Rev = 1.0
Other BIOS signatures found:
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
random: <entropy source>
acpi0: <ABIT AWRDACPI> on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00fdf00
PCI-Only Interrupts: 10 11
Location Bus Device Pin Link IRQs
slot 1 0 15 A 0x60 3 4 5 7 9 10 11 12 14 15
slot 1 0 15 B 0x61 3 4 5 7 9 10 11 12 14 15
slot 1 0 15 C 0x62 3 4 5 7 9 10 11 12 14 15
slot 1 0 15 D 0x63 3 4 5 7 9 10 11 12 14 15
slot 2 0 13 A 0x61 3 4 5 7 9 10 11 12 14 15
slot 2 0 13 B 0x62 3 4 5 7 9 10 11 12 14 15
slot 2 0 13 C 0x63 3 4 5 7 9 10 11 12 14 15
slot 2 0 13 D 0x60 3 4 5 7 9 10 11 12 14 15
slot 3 0 11 A 0x62 3 4 5 7 9 10 11 12 14 15
slot 3 0 11 B 0x63 3 4 5 7 9 10 11 12 14 15
slot 3 0 11 C 0x60 3 4 5 7 9 10 11 12 14 15
slot 3 0 11 D 0x61 3 4 5 7 9 10 11 12 14 15
slot 4 0 9 A 0x63 3 4 5 7 9 10 11 12 14 15
slot 4 0 9 B 0x60 3 4 5 7 9 10 11 12 14 15
slot 4 0 9 C 0x61 3 4 5 7 9 10 11 12 14 15
slot 4 0 9 D 0x62 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 A 0x63 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 B 0x60 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 C 0x61 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 D 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 7 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 7 B 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 7 C 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 7 D 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 1 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 1 B 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 1 C 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 1 D 0x63 3 4 5 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: Power Button (fixed)
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 16777211, width = 16777209
ACPI timer looks BAD min = 2, max = 6, width = 4
ACPI timer looks GOOD min = 2, max = 4, width = 2
ACPI timer looks GOOD min = 2, max = 4, width = 2
ACPI timer looks BAD min = 2, max = 16777213, width = 16777211
ACPI timer looks GOOD min = 2, max = 4, width = 2
ACPI timer looks GOOD min = 2, max = 4, width = 2
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 5, width = 3
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
ACPI-1287: *** Error: Method execution failed
[\\_SB_.PCI0.ISA_.FDC0._CRS] (Node 0xc1c20f40)
, AE_AML_UNINITIALIZED_LOCAL
ACPI-0175: *** Error: Method execution failed
[\\_SB_.PCI0.ISA_.FDC0._CRS] (Node 0xc1c20f40)
, AE_AML_UNINITIALIZED_LOCAL
can't fetch resources for \\_SB_.PCI0.ISA_.FDC0 - AE_AML_UNINITIALIZED_LOCAL
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4000-0x4041,0xcf8-0xcff on
acpi0
---- initial configuration ------------------------
\\_SB_.PCI0.ISA_.LNKA irq 0: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.15.0
\\_SB_.PCI0.ISA_.LNKB irq 10: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.15.1
\\_SB_.PCI0.ISA_.LNKC irq 11: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.15.2
\\_SB_.PCI0.ISA_.LNKD irq 0: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.15.3
\\_SB_.PCI0.ISA_.LNKB irq 10: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.13.0
\\_SB_.PCI0.ISA_.LNKC irq 11: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.13.1
\\_SB_.PCI0.ISA_.LNKD irq 0: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.13.2
\\_SB_.PCI0.ISA_.LNKA irq 0: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.13.3
\\_SB_.PCI0.ISA_.LNKC irq 11: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.11.0
\\_SB_.PCI0.ISA_.LNKD irq 0: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.11.1
\\_SB_.PCI0.ISA_.LNKA irq 0: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.11.2
\\_SB_.PCI0.ISA_.LNKB irq 10: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.11.3
\\_SB_.PCI0.ISA_.LNKD irq 0: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.9.0
\\_SB_.PCI0.ISA_.LNKA irq 0: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.9.1
\\_SB_.PCI0.ISA_.LNKB irq 10: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.9.2
\\_SB_.PCI0.ISA_.LNKC irq 11: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.9.3
\\_SB_.PCI0.ISA_.LNKD irq 0: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.17.0
\\_SB_.PCI0.ISA_.LNKA irq 0: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.17.1
\\_SB_.PCI0.ISA_.LNKB irq 10: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.17.2
\\_SB_.PCI0.ISA_.LNKC irq 11: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.17.3
\\_SB_.PCI0.ISA_.LNKA irq 0: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.7.0
\\_SB_.PCI0.ISA_.LNKB irq 10: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.7.1
\\_SB_.PCI0.ISA_.LNKC irq 11: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.7.2
\\_SB_.PCI0.ISA_.LNKD irq 0: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.7.3
\\_SB_.PCI0.ISA_.LNKA irq 0: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.1.0
\\_SB_.PCI0.ISA_.LNKB irq 10: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.1.1
\\_SB_.PCI0.ISA_.LNKC irq 11: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.1.2
\\_SB_.PCI0.ISA_.LNKD irq 0: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.1.3
---- before setting priority for links ------------
\\_SB_.PCI0.ISA_.LNKA:
interrupts: 3 4 5 6 7 10 11 12
14 15
penalty: 2540 2540 1540 2540 2540 2240 2240 2540
11540 11540
references: 7
priority: 0
\\_SB_.PCI0.ISA_.LNKD:
interrupts: 3 4 5 6 7 10 11 12
14 15
penalty: 2540 2540 1540 2540 2540 2240 2240 2540
11540 11540
references: 7
priority: 0
---- before fixup boot-disabled links -------------
\\_SB_.PCI0.ISA_.LNKA:
interrupts: 3 4 5 6 7 10 11 12
14 15
penalty: 2540 2540 1540 2540 2540 2240 2240 2540
11540 11540
references: 7
priority: 29260
\\_SB_.PCI0.ISA_.LNKD:
interrupts: 3 4 5 6 7 10 11 12
14 15
penalty: 2540 2540 1540 2540 2540 2240 2240 2540
11540 11540
references: 7
priority: 29260
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.ISA_.LNKA irq 5: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.15.0
\\_SB_.PCI0.ISA_.LNKB irq 10: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.15.1
\\_SB_.PCI0.ISA_.LNKC irq 11: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.15.2
\\_SB_.PCI0.ISA_.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.15.3
\\_SB_.PCI0.ISA_.LNKB irq 10: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.13.0
\\_SB_.PCI0.ISA_.LNKC irq 11: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.13.1
\\_SB_.PCI0.ISA_.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.13.2
\\_SB_.PCI0.ISA_.LNKA irq 5: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.13.3
\\_SB_.PCI0.ISA_.LNKC irq 11: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.11.0
\\_SB_.PCI0.ISA_.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.11.1
\\_SB_.PCI0.ISA_.LNKA irq 5: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.11.2
\\_SB_.PCI0.ISA_.LNKB irq 10: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.11.3
\\_SB_.PCI0.ISA_.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.9.0
\\_SB_.PCI0.ISA_.LNKA irq 5: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.9.1
\\_SB_.PCI0.ISA_.LNKB irq 10: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.9.2
\\_SB_.PCI0.ISA_.LNKC irq 11: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.9.3
\\_SB_.PCI0.ISA_.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.17.0
\\_SB_.PCI0.ISA_.LNKA irq 5: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.17.1
\\_SB_.PCI0.ISA_.LNKB irq 10: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.17.2
\\_SB_.PCI0.ISA_.LNKC irq 11: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.17.3
\\_SB_.PCI0.ISA_.LNKA irq 5: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.7.0
\\_SB_.PCI0.ISA_.LNKB irq 10: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.7.1
\\_SB_.PCI0.ISA_.LNKC irq 11: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.7.2
\\_SB_.PCI0.ISA_.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.7.3
\\_SB_.PCI0.ISA_.LNKA irq 5: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.1.0
\\_SB_.PCI0.ISA_.LNKB irq 10: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.1.1
\\_SB_.PCI0.ISA_.LNKC irq 11: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.1.2
\\_SB_.PCI0.ISA_.LNKD irq 11: [ 3 4 5 6 7 10 11 12 14 15]
low,level,sharable 0.1.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base d0000000, size 26, enabled
found-> vendor=0x8086, dev=0x7190, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7191, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x88 (34000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000f000, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000e000, size 5, enabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=255
map[90]: type 4, range 32, base 00005000, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x02
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1011, dev=0x0021, revid=0x01
bus=0, slot=13, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xd0000000-0xd3ffffff
at device 0.0 on pci
0
agp0: allocating GATT for aperture of size 64M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xd4000000-0xd5ffffff
pcib1: prefetched decode 0xd8000000-0xd8ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base d4000000, size 24, enabled
map[14]: type 3, range 32, base d8000000, size 24, enabled
found-> vendor=0x10de, dev=0x0020, revid=0x04
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=255
powerspec 1 supports D0 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xf000-0xf00f at device 7.1 on
pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=03 ostat1=02
ata1-master: stat=0x01 err=0x01 lsb=0x01 msb=0x01
ata1-slave: stat=0x04 err=0x04 lsb=0x04 msb=0x04
ata1-slave: stat=0x02 err=0x02 lsb=0x02 msb=0x02
ata1-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 mask=03 stat0=01 stat1=00 devices=0x0
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 7.2 (no driver attached)
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pcib2: <PCI-PCI bridge> at device 13.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xd000-0xdfff
pcib2: memory decode 0xd6000000-0xd7ffffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci2: <PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 4, range 32, base 0000d000, size 7, enabled
map[14]: type 1, range 32, base d7000000, size 7, enabled
pcib0: matched entry for 0.13.INTA (source \\_SB_.PCI0.ISA_.LNKB)
pcib0: slot 13 INTA is routed to irq 10
pcib2: slot 4 INTA is routed to irq 10
found-> vendor=0x1011, dev=0x0009, revid=0x20
bus=2, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns)
intpin=a, irq=10
map[10]: type 4, range 32, base 0000d400, size 7, enabled
map[14]: type 1, range 32, base d7001000, size 7, enabled
pcib0: matched entry for 0.13.INTB (source \\_SB_.PCI0.ISA_.LNKC)
pcib0: slot 13 INTB is routed to irq 11
pcib2: slot 5 INTA is routed to irq 11
found-> vendor=0x1011, dev=0x0009, revid=0x20
bus=2, slot=5, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns)
intpin=a, irq=11
de0: <Digital 21140A Fast Ethernet> port 0xd000-0xd07f mem
0xd7000000-0xd700007f irq 10 at devic
e 4.0 on pci2
pcib2: device de0 requested decoded I/O range 0xd000-0xd07f
de0: SMC 9332BDT 21140A [10-100Mb/s] pass 2.0
de0: address 00:00:c0:cb:5b:f2
de0: enabling 10baseT port
de0: bpf attached
de1: <Digital 21140A Fast Ethernet> port 0xd400-0xd47f mem
0xd7001000-0xd700107f irq 11 at devic
e 5.0 on pci2
pcib2: device de1 requested decoded I/O range 0xd400-0xd47f
de1: SMC 9332BDT 21140A [10-100Mb/s] pass 2.0
de1: address 00:00:c0:ca:5b:f2
de1: enabling 10baseT port
de1: bpf attached
fdc0: cannot reserve I/O port range (1 ports)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
vpo0: can't connect to the drive
imm0: (disconnect) s1=0x38 s2=0x38, s3=0x38
imm0: (connect) s1=0x38 s2=0x38, s3=0x38
imm0: (connect) s1=0x38 s2=0x38, s3=0x38
imm0: (connect) s1=0x38 s2=0x38, s3=0x38
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0-50, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:08, syncbits:08
fdc0: cannot reserve I/O port range (1 ports)
unknown: not probed (disabled)
unknown: not probed (disabled)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xc87ff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: cannot reserve I/O port range (6 ports)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Timecounter "TSC" frequency 412365212 Hz quality 800
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.31 initialized. Default = block all, Logging = enabled
lo0: bpf attached
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ata0-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata0-master: setting PIO4 on Intel PIIX4 chip
ata0-master: setting UDMA33 on Intel PIIX4 chip
ata0-slave: setting PIO4 on Intel PIIX4 chip
ata0-slave: setting UDMA33 on Intel PIIX4 chip
GEOM: create disk ad0 dp=0xc1cb7e60
ad0: <SAMSUNG VG38404A (8.40GB)/HT100> ATA-3 disk at ata0-master
ad0: 8056MB (16498944 sectors), 16368 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
GEOM: new disk ad0
[0] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/2/63 s:0 l:16498944
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 0 length 8447459328 end 8447459327
GEOM: Configure ad0a, start 0 length 134217728 end 134217727
GEOM: Configure ad0b, start 134217728 length 268435456 end 402653183
GEOM: Configure ad0c, start 0 length 8447459328 end 8447459327
GEOM: Configure ad0d, start 402653184 length 134217728 end 536870911
GEOM: Configure ad0e, start 536870912 length 134217728 end 671088639
GEOM: Configure ad0f, start 671088640 length 7776370688 end 8447459327
GEOM: Configure ad0s1a, start 0 length 134217728 end 134217727
GEOM: Configure ad0s1b, start 134217728 length 268435456 end 402653183
GEOM: Configure ad0s1c, start 0 length 8447459328 end 8447459327
GEOM: Configure ad0s1d, start 402653184 length 134217728 end 536870911
GEOM: Configure ad0s1e, start 536870912 length 134217728 end 671088639
GEOM: Configure ad0s1f, start 671088640 length 7776370688 end 8447459327
acd0: <TOSHIBA CD-ROM XM-6402B/1008> CDROM drive at ata0 as slave
acd0: read 5512KB/s (5512KB/s), 256KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream
acd0: Writes:
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
de0: enabling Full Duplex 100baseTX port
de1: enabling Full Duplex 100baseTX port
(probe3:ata1:0:1:0): error 22
(probe3:ata1:0:1:0): Unretryable Error
(probe3:ata1:0:1:0): error 22
(probe3:ata1:0:1:0): Unretryable Error
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe2:ata1:0:0:0): error 22
(probe2:ata1:0:0:0): Unretryable Error
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe2:ata1:0:0:0): error 22
(probe2:ata1:0:0:0): Unretryable Error
(probe1:ata0:0:1:0): Retrying Command
(probe1:ata0:0:1:0): error 22
(probe1:ata0:0:1:0): Unretryable Error
(probe1:ata0:0:1:0): Retrying Command
(probe1:ata0:0:1:0): error 22
(probe1:ata0:0:1:0): Unretryable Error
pass0 at ata0 bus 0 target 1 lun 0
pass0: <TOSHIBA CD-ROM XM-6402B 1008> Removable CD-ROM SCSI-0 device
pass0: 33.000MB/s transfers
GEOM: create disk cd0 dp=0xc1c56600
GEOM: new disk cd0
(cd0:ata0:0:1:0): Retrying Command
(cd0:ata0:0:1:0): error 6
(cd0:ata0:0:1:0): Unretryable Error
cd0 at ata0 bus 0 target 1 lun 0
cd0: <TOSHIBA CD-ROM XM-6402B 1008> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
(cd0:ata0:0:1:0): Retrying Command
(cd0:ata0:0:1:0): error 6
(cd0:ata0:0:1:0): Unretryable Error
(cd0:ata0:0:1:0): Retrying Command
(cd0:ata0:0:1:0): error 6
(cd0:ata0:0:1:0): Unretryable Error
Mounting root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
de0: link down: cable problem?
de1: link down: cable problem?
de0: enabling 100baseTX port
de0: enabling Full Duplex 100baseTX port
de1: enabling 100baseTX port
# cat /usr/src/sys/i386/conf/vpn.ule
options INCLUDE_CONFIG_FILE
ident "vpn.ule"
machine i386
cpu I686_CPU
options HZ=1000
#options DEVICE_POLLING
options SMP
options NO_MIXED_MODE
device apic
device acpi
makeoptions DEBUG=-g
makeoptions CONF_CFLAGS=-fno-builtin
options KTRACE
options KTRACE_REQUEST_POOL=101
options SHOW_BUSYBUFS
#options DDB
#options DDB_TRACE
#options DDB_UNATTENDED
#options WITNESS
#options WITNESS_DDB
#options MUTEX_DEBUG
#options WITNESS_SKIPSPIN
#options ADAPTIVE_MUTEXES
#options MUTEX_DEBUG
#options MUTEX_PROFILING
#options INVARIANTS
#options INVARIANT_SUPPORT
#options DIAGNOSTIC
#options WATCHDOG
options INET
#options TCPDEBUG
options TCP_DROP_SYNFIN
options RANDOM_IP_ID
options ZERO_COPY_SOCKETS
options IPFILTER
options IPFILTER_LOG
options IPFILTER_DEFAULT_BLOCK
options PFIL_HOOKS
options IPSTEALTH
options IPSEC
options IPSEC_ESP
#options IPSEC_DEBUG
#options SCHED_4BSD
options SCHED_ULE
options COMPAT_43
options COMPAT_FREEBSD4
options FFS
options SOFTUPDATES
options UFS_DIRHASH
#options UFS_EXTATTR
#options UFS_EXTATTR_AUTOSTART
#options UFS_ACL
options SYSVSHM
options SYSVMSG
options MSGMNB=16384
options MSGMNI=64
options MSGSEG=1024
options MSGSSZ=64
options MSGTQL=4096
options SYSVSEM
options P1003_1B_SEMAPHORES
options _KPOSIX_PRIORITY_SCHEDULING
device isa
device pci
device agp
device fdc
device npx
device atkbdc
device atkbd
options KBD_INSTALL_CDEV
device psm
device vga
device splash
device sc
options SC_NORM_ATTR=(FG_GREEN|BG_BLACK)
options SC_NORM_REV_ATTR=(FG_YELLOW|BG_GREEN)
options SC_KERNEL_CONS_ATTR=(FG_RED|BG_BLACK)
options SC_KERNEL_CONS_REV_ATTR=(FG_BLACK|BG_RED)
device sio
options CONSPEED=19200
device ppc
device ppbus
device lpt
device plip
device ppi
device vpo
# SCSI / RAID
options AHC_ALLOW_MEMIO
device scbus
device ch
device da
device sa
device cd
device pt
device targ
device targbh
device pass
device ses
options SES_ENABLE_PASSTHROUGH
# ATAPI
device ata
device atadisk
device atapicd
device atapifd
device atapist
device atapicam
#options ATA_STATIC_ID
# Pseudo devices - the number indicates how many units to allocate.
device random
device loop
device ether
device tun
device pty
device gif
device bpf
More information about the freebsd-current
mailing list